SCFLicense: Extension Licensing on Sketchucation

Rich O Brien · 12 May 2022, 13:59

It could be in your Spam?

You can also retrieve license files at https://sketchucation.com/webshop/my-licences.php

AzusaGasai · 14 May 2022, 04:41

hi fredo

I need a help.
(I am a user in china，My English isn’t very good.)

I bought your 2022bundle today and I cannot avtive my license.
I installed the latest sketchucation store extesion and also latest fredo6 plugin.
but when I want to validate license ,I'll get an erroer coede B03.
and if I click validate license, I'll get an error A04.

I tryed to delete signature file and revalidate,and I'll get error B03.
I opened signature txt,in the txt file, [The count IF exited] is writed.

I'm not change my PC name ,and device name&user name are all in english.

I like your plugin and they are very helpful, but if my license can't use,I may want to payback.

I look forward to hearing from you.

fredo6 · 14 May 2022, 10:57

@azusagasai said:

I bought your 2022bundle today and I cannot avtive my license.
I installed the latest sketchucation store extesion and also latest fredo6 plugin.
but when I want to validate license ,I'll get an erroer coede B03.
and if I click validate license, I'll get an error A04.

Very likely, you have non-ASCII characters in your computer name. This is a source of problems.

I would suggest you change your computer name, delete the signature file and revalidate

AzusaGasai · 14 May 2022, 15:55

@fredo6 said:

@azusagasai said:

I bought your 2022bundle today and I cannot avtive my license.
I installed the latest sketchucation store extesion and also latest fredo6 plugin.
but when I want to validate license ,I'll get an erroer coede B03.
and if I click validate license, I'll get an error A04.

Very likely, you have non-ASCII characters in your computer name. This is a source of problems.

I would suggest you change your computer name, delete the signature file and revalidate

Very thanks for your advise!I succeed.

in my computer name, I changed it and succeed.

gfparadox809 · 14 May 2022, 16:37

hallo, I have bought JointPushPull license on 5/13
my Transaction ID is 4D544345NC0516934
but I have not received the License letter
how can I solve this problem?

Dave R · 14 May 2022, 17:18

@gfparadox809 said:

how can I solve this problem?

See this post:

https://sketchucation.com/forums/viewtopic.php?f=323&t=73325&p=680144#p680080

tomkuc74 · 15 May 2022, 16:11

Can you release all my seats in all licenses, please? Recently I mixed my computers because of rtx card problems so I had to reinstal systems and forget to change computer name before validate licenses.

fredo6 · 15 May 2022, 18:54

@tomkuc74 said:

Can you release all my seats in all licenses, please? Recently I mixed my computers because of rtx card problems so I had to reinstal systems and forget to change computer name before validate licenses.

This is done.

jrozansky · 16 May 2022, 07:21

Hello, I purchased RoundCorner and installed the license but now it is not working and saying my trial period ended. The error message I am getting is:

msg_validation_error

Request to Sketchucation = ERROR_F09

I really used Roundcorner a lot for work and want to get it working again. Thank you!

fredo6 · 16 May 2022, 07:32

@jrozansky said:

Hello, I purchased RoundCorner and installed the license but now it is not working and saying my trial period ended. The error message I am getting is:

msg_validation_error

Request to Sketchucation = ERROR_F09

First, can you upgrade to the latest version of Skecthucation ExtensionStore .

Then, I found that you have already validated your RoundCorner license for 1 seat. Are you trying to validate on a second computer?

danygico · 16 May 2022, 15:47

@danygico said:

hi

I have
Fredo6 Bundle 2022
SketchUcation v4.2.6
Fredo6 LibFredo6 v12.8a

after released the licenses to install SU2022 (I understood it after that it was not needed) now I find RoundCorner that I have 3 Seats used even if I am only on 2 computers, moreover the other plugins I had installed work even if they do not appear in "Global status of plugins under SCF License " as seen in the image

how can i solve?
thank you

there is no solution for my problem?

fredo6 · 16 May 2022, 16:13

@danygico said:

there is no solution for my problem?

Do you want to release all seats (and then revalidate)?

danygico · 17 May 2022, 10:33

@fredo6 said:

@danygico said:

there is no solution for my problem?

Do you want to release all seats (and then revalidate)?

yes, thank you very much

RubenB · 17 May 2022, 19:29

Trying to figure out how to get Curviloft working again. I'm on a temp license till the end of the month or shortly there after, waiting on a new computer. In the interim I'm on my old laptop with a temp license so I can get some work done till my new computer gets here. Curviloft used to work on this machine but it's been a while sense it was last used. I never paid for a license as I didn't think I needed one before. If someone can help, I'll pay for a license just need help with where to buy the license

Dave R · 17 May 2022, 19:35

@rubenb said:

Curviloft used to work on this machine but it's been a while sense it was last used. I never paid for a license as I didn't think I needed one before. If someone can help, I'll pay for a license just need help with where to buy the license

Curviloft and some other extensions became paid extensions in March. You can purchase the license for it. See: https://sketchucation.com/forums/viewtopic.php?f=323&t=74668

As the post indicates, you need to install the Sketchucation Extension Store for the license. Do that first and then use it to install and purchase the license(s).

fredo6 · 18 May 2022, 13:41

@1colombo said:

Hello,
please release all the locations of my licenses, I will then recheck them from the current location. I can't log in - the problem must have occurred when I reinstalled on another computer... Thanks a lot.

I cannot find a JointPushPull license for user 1colombo.
Did you purchase it under another Sketchucation user name? If so, PM me the details.

necoopanik · 18 May 2022, 14:37

Immediately after purchasing the $40 package, I received 8 emails. I activated the Curviloft and joint push pull plugins with the license file that came with the mail, but it did not work for Fredocorner, although I tried many times. I just installed the other 5 plugins and it didn't ask for a license for them. I'm guessing that licensing will be done after the 30-day demo period expires. I did a solution given on the forum page but it still didn't work. I deleted the file in the license folder and licensed again for 3 plugins, again two of them happened but fredocorner did not. When I delete the file and do it again, it now shows that my 2 rights are used while trying to use one of my 3 rights.

can you help me ?

Rich O Brien · 18 May 2022, 14:48

FredoCorner and RoundCorner are not the same tools. Try licensing RoundCorner.

Dave R · 18 May 2022, 15:02

@rich o brien said:

FredoCorner and RoundCorner are not the same tools.

Seems like a lot of users have a difficult time with this concept. I wonder if there's a way to make it more obvious. Or maybe add FredoCorner to the bundle and increase the price accordingly?

necoopanik · 18 May 2022, 15:09

@rich o brien said:

FredoCorner and RoundCorner are not the same tools. Try licensing RoundCorner.

Yes, I missed it and I didn't notice it. Thank you for the licensing issue. I am currently using a license on one computer, but my 2 plugins appear as using 2 computers on the license page. I'm guessing it happened after deleting the file in the license folder and re-licensing. How can I fix my unused license to appear as being used? thanks.