[Plugin] FredoTools - v4.5c - 24 Jun 24

fredo6 · 13 Feb 2020, 18:45

is it possible to do the same with length as ReportLabelArea does with faces.

You need to tell which length...length of edges, length of object bounding boxes, ...

volker72 · 18 Feb 2020, 13:00

@volker72 said:

is it possible to do the same with length as ReportLabelArea does with faces.

You need to tell which length...length of edges, length of object bounding boxes, ...

I am interested in the length of edges. The goal is to add up these lengths by layers. That would be wonderful.

Dave R · 3 Mar 2020, 16:07

@jmdrla said:

Unfortunately it is not in my extension menu and I cannot access the tools... What is the issue?

First things first. FredoTools aren't supposed to show up in the Extension menu. They are supposed to show up in the Tools menu. Did you look there? Also did you restart SketchUp after installing the extensions?

There's also a toolbar that can be made visible via View>Toolbars.

@jmdrla said:

I am assuming that this is not a version that can be used on SU2020 even though it shows as compatible with 2020.

Not so. FredoTools work just fine in SketchUp 2020. Here is a screen shot from SU2020 showing the menu.

Out of curiosity, when you installed SketchUp 2020, did you right click on the downloaded installer file and choose Run as administrator? BTW, maybe you could update your profile. It still shows you are using SU2017.

jmdrla · 3 Mar 2020, 16:35

I loaded the FredoTools-v3.8c this morning in my SketchUp Pro along with the required library. I have tried to add the tools to the program about ten times now and it is showing up in the extension manager as installed and activated. Unfortunately it is not in my extension menu and I cannot access the tools. When I look at the details for the tools on the extension manager I can see that it is signed but there is no other information in the details. I am assuming that this is not a version that can be used on SU2020 even though it shows as compatible with 2020. What is the issue?

OK I should have used the word tools instead of extensions. However the program is not in the tools menu. I did restart the SU2020 when I did the install and nothing appeared in my tools menu. I am uploading a screen shot so you can see what I have

edjul04 · 30 Mar 2020, 21:10

If I generate area report, it shows all areas on the plugin screen but if I export to CSV it gives me an error and only shows the information of one of the entities.

How can I fix the mistake?

fredo6 · 1 Apr 2020, 12:14

@edjul04 said:

If I generate area report, it shows all areas on the plugin screen but if I export to CSV it gives me an error and only shows the information of one of the entities.

How can I fix the mistake?

What is the error?

edjul04 · 1 Apr 2020, 13:03

Thanks!
This is an example of what was happening.

I re-installed sketchup and the plugin without success, I was using SketchUp2019. Yesterday I upgraded my license to SketchUp2020 and the problem was fixed.

fredo6 · 1 Apr 2020, 19:38

Could you post or PM me the model so that I have a closer look.

Thanks

designerbursa · 4 May 2020, 14:54

fredo tools icon problems

fredo6 · 4 May 2020, 15:09

@designerbursa said:

fredo tools icon problems

This is a known problem with SU2020, not specific to my plugins.

Apparently, the installation of SU2020 'forgets' to register itself to Internet Explorer and as a result, it does not display the SVG graphics. Not even sure this is fixed with a new installation.

See this post for a kind of fix.

Fredo

P: Are you still on SU8, as indicated in your profile?

designerbursa · 4 May 2020, 21:46

yes I switched to 2020, thanks for your help

designerbursa · 4 May 2020, 21:56

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BROWSER_EMULATION]
"sketchup.exe"=dword:00002af8

I added regedit and it was improved thanks a lot

fredo6 · 17 May 2020, 19:10

NEW RELEASE: FredoTools v4.0a - 17 May 20

Requirement: LibFredo6 v10.4b or above

FredoTools 4.0a is a major release for ReportLabelArea, fixing visual display and resizing.

See FredoTools plugin home page for Download.

See also main post of this thread for User Discussion.

Fredo

CTH1963 · 19 May 2020, 02:00

@fredo6 said:

NEW RELEASE: FredoTools v4.0a - 17 May 20

Requirement: LibFredo6 v10.4b or above

FredoTools 4.0a is a major release for ReportLabelArea, fixing visual display and resizing.

See FredoTools plugin home page for Download.

See also main post of this thread for User Discussion.

Fredo

Hi,

Since the 4.0a release I get an error when starting Sketchup (screenshot attached).

All other updates have been fine...

fredo6 · 19 May 2020, 12:44

@cth1963 said:

Hi,

Since the 4.0a release I get an error when starting Sketchup (screenshot attached).

All other updates have been fine...

Please note that I do not support evolution for my plugins for versions prior to SU2017 (so up to SU2016). This is due to a change of policy in the releasing of extension by Trimble.

For convenience, I kept the legacy versions in this place.

CTH1963 · 19 May 2020, 22:52

@fredo6 said:

@cth1963 said:

Hi,

Since the 4.0a release I get an error when starting Sketchup (screenshot attached).

All other updates have been fine...

Please note that I do not support evolution for my plugins for versions prior to SU2017 (so up to SU2016). This is due to a change of policy in the releasing of extension by Trimble.

For convenience, I kept the legacy versions in this place.

Thanks, I was hoping to get a link to the prior version - much appreciated.

Ste34 · 25 May 2020, 22:10

Bonjour,

Je n'arrive pas à lancer votre plugin, L'erreur ci-dessous s'affiche lors du lancement de sketchup :
Auriez vous une solution à me proposer ?

Cordialement

Erreur de chargement du fichier Fredo6_!LibFredo6.rb
Error: #<Errno::EACCES: Permission denied @ rb_sysopen - C:/Users/ST1DCE~1/AppData/Local/Temp/Fredo6_LibFredo6_TemporaryFiles/LibFredo6Trace_17_1590444009629.txt>
c:/users/sté/appdata/roaming/sketchup/sketchup 2017/sketchup/plugins/fredo6_!libfredo6/top_libfredo6.rbe:113:in initialize' c:/users/sté/appdata/roaming/sketchup/sketchup 2017/sketchup/plugins/fredo6_!libfredo6/top_libfredo6.rbe:113:in open'
c:/users/sté/appdata/roaming/sketchup/sketchup 2017/sketchup/plugins/fredo6_!libfredo6/top_libfredo6.rbe:113:in log' c:/users/sté/appdata/roaming/sketchup/sketchup 2017/sketchup/plugins/fredo6_!libfredo6/top_libfredo6.rbe:166:in startup'
C:/Users/sTé/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/Fredo6_!LibFredo6.rb:65:in process' C:/Users/sTé/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/Fredo6_!LibFredo6.rb:72:in module:LibFredo6_Loader'
C:/Users/sTé/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/Fredo6_!LibFredo6.rb:30:in <top (required)>' Erreur de chargement du fichier Fredo6_FredoTools.rb Error: #<TypeError: can't convert nil into an exact number> C:/Users/sTé/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/Fredo6_!LibFredo6.rb:81:in -'
C:/Users/sTé/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/Fredo6_!LibFredo6.rb:81:in <top (required)>' C:/Program Files/SketchUp/SketchUp 2017/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb:54:in require'
C:/Program Files/SketchUp/SketchUp 2017/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb:54:in require' C:/Users/sTé/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/Fredo6_FredoTools.rb:47:in module:Fredo6'
C:/Users/sTé/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/Fredo6_FredoTools.rb:26:in `<top (required)>'

Avex · 28 May 2020, 18:59

Exactly the same over here...

TIG · 28 May 2020, 19:12

You have an accented character in your Windows user-name:
c:/users/sté/appdata/...
This used to be the kiss-of-death to older Ruby versions, but with the newer 'encode' methods most user's paths can be re-encoded into a 'Ruby-safe' format...
Clearly something is going wrong !
I'm sure that Fredo will have ideas, and a solution...
Watch this space...

Vous avez un caractère accentué dans votre nom d'utilisateur Windows:
c:/users/sté/appdata/...
Auparavant, c'était le baiser de la mort pour les anciennes versions de Ruby, mais avec les nouvelles méthodes d'encodage, la plupart des chemins de l'utilisateur peuvent être ré-encodés au format 'Ruby-safe' ...
De toute évidence, quelque chose ne va pas!
Je suis sûr que Fredo aura des idées et une solution ...
Surveillez cet endroit...

CTH1963 · 1 Jun 2020, 23:29

@cth1963 said:

@fredo6 said:

@cth1963 said:

Hi,

Since the 4.0a release I get an error when starting Sketchup (screenshot attached).

All other updates have been fine...

Please note that I do not support evolution for my plugins for versions prior to SU2017 (so up to SU2016). This is due to a change of policy in the releasing of extension by Trimble.

For convenience, I kept the legacy versions in this place.

Thanks, I was hoping to get a link to the prior version - much appreciated.

Ok, I've now installed LibFredo v9.5k from the Sketchucation store which says it's OK for SU versions up to 2016. When Skethcup restarts, I get a dialog saying:

"This legacy version of LibFredo6 can ONLY be used for Sketchup version prior to SU2016"

This implies: new LibFredo only for SU >=2017
legacy LibFrdeo only for SU <= 2015

No provision for SU2016?!?

I look in Fredo6_!LibFredo6.rb and see one of the first the lines is:

if Sketchup.version.to_i < 16

Thinking this was a typo I edited it to test for '< 17' and now the result is:

"Wrong installation: Folder Fredo6_!LibFredo6 is missing in <my plugins location>"

I can confirm the folder is present in the location that it's complaining about.

I'm not sure what's going on here - any help appreciated.