[Plugin] BezierSpline - v2.2a - 22 Apr 21

[fredo6]

This is related with the non-ascii deficiencies of old Sketchup versions in some Windows configurations, and there is nothing that can be done (except to migrate to newer versions).

Fredo

[LisaG]

Hi,
Just downloaded LibFredo6 plugin for SketchUp Make V2017. The installation is not yet complete as under Preferences there is no "Extensions" listed. Not sure where else to find it!
Thanks.

[Dave R]

@lisag said:

The installation is not yet complete as under Preferences there is no "Extensions" listed. Not sure where else to find it!
Thanks.

LibFredo6 appears in the Window menu and Bezier Spline Curves appears in the Draw menu. Did you look there?

[Ahmed0007]

Polyline segmentor is not working in sketchup 2020?

[Dave R]

@ahmed0007 said:

Polyline segmentor is not working in sketchup 2020?

It worked for me just now in 2020.

[Ahmed0007]

@dave r said:

@ahmed0007 said:

Polyline segmentor is not working in sketchup 2020?

It worked for me just now in 2020.
[attachment=1:37qeug7g]<!-- ia1 -->Screenshot - 2_2_2020 , 3_59_21 PM.png<!-- ia1 -->[/attachment:37qeug7g]

Thanks for quick response.
but not working for me

---

[Box]

Do you have the most up to date Libfredo?

[fredo6]

@Ahmed0007

Normally, when you convert to Segmentor, you should have a dialog box popping up (asking for number of segments).

Could you open the Ruby console while you invoke the convert.

Thanks

Fredo

[Ahmed0007]

@box said:

Do you have the most up to date Libfredo?

yes.

[Ahmed0007]

@fredo6 said:

@Ahmed0007

Normally, when you convert to Segmentor, you should have a dialog box popping up (asking for number of segments).

Could you open the Ruby console while you invoke the convert.

Thanks

Fredo

Error: #<NameError: uninitialized constant BZ__Segmentor::Traductor>
C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/BZ__Segmentor.rb:72:in bz_ask_extras' C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2058:in call'
C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2058:in call_ask_extras' C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2109:in conversion_curve'
C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2411:in `block (2 levels) in compute_contextual_menu'

Thanks for Respond

[fredo6]

Can you check if in your plugin directory, subfolder bezierspline, you have a file called LibTraductor.rb.

If not, can you download beizerspline v2.1a.

Also, you should delete any file LibTraductor.rb which would be in the main Plugin directory.

[Ahmed0007]

@fredo6 said:

Can you check if in your plugin directory, subfolder bezierspline, you have a file called LibTraductor.rb.

If not, can you download beizerspline v2.1a.

Also, you should delete any file LibTraductor.rb which would be in the main Plugin directory.

Thanks Now it's working.

[fredo6]

@ahmed0007 said:

Thanks Now it's working.

What was the problem?

[rv1974]

Fredo, two observations:
'Close nicely' in Cubic Bezier is broken (the curve disappears, rarely the curve is kept but it exits without closing)
Would it be possible to add some F(?) shortcut to 'Done end exit' across all sub-tools?
Thank you
P.S. BTW there's something in your closed curves that doesn't allow them to be used as paths for Profile Builder's assemblies. I'd have to explode or 'turn to arch' (another plugin) to overcome it. Is there possibility to do something on your end?

[fredo6]

I am not able to reproduce the issues you mentioned.

Could you open the Ruby console when you play with BezierSpline.

Fredo

[rv1974]

Error: #<ArgumentError: wrong number of arguments (given 2, expected 1)>
C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/offset.rb:56:in offset' C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2793:in close_loop_by_Bezier'
C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2049:in call_compute_curve' C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:984:in draw'

[rv1974]

rror: #<ArgumentError: At least 2 points required to initialize curve>
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/curve.rbe:8:in initialize' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:2097:in new'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:2097:in block in rebuild_entity_array_from_points_array' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:2037:in each_index'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:2037:in rebuild_entity_array_from_points_array' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:1995:in offset!'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:2191:in offset_chain' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:219:in block in build_rails'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:215:in each' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:215:in build_rails'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:184:in draw' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:1221:in build_fence'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:1209:in block in build_along_path' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:1208:in each'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:1208:in build_along_path' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:126:in block in initialize'

I could send a file if needed

[fredo6]

Could you send me the offset.rb file that is mentioned

C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/offset.rb:56:in `offset'

I don't know what it is but it may cause a conflict.

[rv1974]

some info:
http://www.smustard.com/script/Offset

Please download the updated offset.rb from there.
After I updated the offset.rb from the link above the error message slightly changed:

Error: #<ArgumentError: wrong number of arguments (given 2, expected 1)>
C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/offset.rb:149:in offset' C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2793:in close_loop_by_Bezier'
C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2049:in call_compute_curve' C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:984:in draw'

[fredo6]

You should definitely disregard this plugin.

It redefines base methods for native Sketchup objects (Face, Array, ...). So it causes conflicts with other plugins, among which mine. There is nothing I can do about it.

By the way, this offset.rb is a library to be used by other plugins or extensions. Which one requires offset.rb?