[Plugin] BezierSpline - v2.2a - 22 Apr 21

fredo6 · 3 Feb 2020, 07:36

@Ahmed0007

Normally, when you convert to Segmentor, you should have a dialog box popping up (asking for number of segments).

Could you open the Ruby console while you invoke the convert.

Thanks

Fredo

Ahmed0007 · 3 Feb 2020, 21:51

@box said:

Do you have the most up to date Libfredo?

yes.

Ahmed0007 · 3 Feb 2020, 21:52

@fredo6 said:

@Ahmed0007

Normally, when you convert to Segmentor, you should have a dialog box popping up (asking for number of segments).

Could you open the Ruby console while you invoke the convert.

Thanks

Fredo

Error: #<NameError: uninitialized constant BZ__Segmentor::Traductor>
C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/BZ__Segmentor.rb:72:in bz_ask_extras' C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2058:in call'
C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2058:in call_ask_extras' C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2109:in conversion_curve'
C:/Users/Ahmed/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2411:in `block (2 levels) in compute_contextual_menu'

Thanks for Respond

fredo6 · 3 Feb 2020, 22:14

Can you check if in your plugin directory, subfolder bezierspline, you have a file called LibTraductor.rb.

If not, can you download beizerspline v2.1a.

Also, you should delete any file LibTraductor.rb which would be in the main Plugin directory.

Ahmed0007 · 3 Feb 2020, 22:44

@fredo6 said:

Can you check if in your plugin directory, subfolder bezierspline, you have a file called LibTraductor.rb.

If not, can you download beizerspline v2.1a.

Also, you should delete any file LibTraductor.rb which would be in the main Plugin directory.

Thanks Now it's working.

fredo6 · 4 Feb 2020, 09:25

@ahmed0007 said:

Thanks Now it's working.

What was the problem?

rv1974 · 14 Apr 2021, 06:53

Fredo, two observations:
'Close nicely' in Cubic Bezier is broken (the curve disappears, rarely the curve is kept but it exits without closing)
Would it be possible to add some F(?) shortcut to 'Done end exit' across all sub-tools?
Thank you
P.S. BTW there's something in your closed curves that doesn't allow them to be used as paths for Profile Builder's assemblies. I'd have to explode or 'turn to arch' (another plugin) to overcome it. Is there possibility to do something on your end?

fredo6 · 14 Apr 2021, 07:34

I am not able to reproduce the issues you mentioned.

Could you open the Ruby console when you play with BezierSpline.

Fredo

rv1974 · 14 Apr 2021, 08:35

Error: #<ArgumentError: wrong number of arguments (given 2, expected 1)>
C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/offset.rb:56:in offset' C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2793:in close_loop_by_Bezier'
C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2049:in call_compute_curve' C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:984:in draw'

rv1974 · 14 Apr 2021, 08:47

rror: #<ArgumentError: At least 2 points required to initialize curve>
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/curve.rbe:8:in `initialize' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:2097:in` new'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:2097:in `block in rebuild_entity_array_from_points_array' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:2037:in` each_index'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:2037:in `rebuild_entity_array_from_points_array' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/chain.rbe:1995:in` offset!'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:2191:in `offset_chain' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:219:in` block in build_rails'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:215:in `each' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:215:in` build_rails'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/pbapi/assembly.rbe:184:in `draw' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:1221:in` build_fence'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:1209:in `block in build_along_path' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:1208:in` each'
c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:1208:in `build_along_path' c:/users/user/appdata/roaming/sketchup/sketchup 2021/sketchup/plugins/dm_profilebuilder3/assembly_dialog.rbe:126:in` block in initialize'

I could send a file if needed

fredo6 · 14 Apr 2021, 09:58

Could you send me the offset.rb file that is mentioned

C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/offset.rb:56:in `offset'

I don't know what it is but it may cause a conflict.

rv1974 · 14 Apr 2021, 10:24

some info:
http://www.smustard.com/script/Offset

Please download the updated offset.rb from there.
After I updated the offset.rb from the link above the error message slightly changed:

Error: #<ArgumentError: wrong number of arguments (given 2, expected 1)>
C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/offset.rb:149:in offset' C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2793:in close_loop_by_Bezier'
C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:2049:in call_compute_curve' C:/Users/user/AppData/Roaming/SketchUp/SketchUp 2021/SketchUp/Plugins/bezierspline/bezierspline_main.rb:984:in draw'

fredo6 · 14 Apr 2021, 15:38

You should definitely disregard this plugin.

It redefines base methods for native Sketchup objects (Face, Array, ...). So it causes conflicts with other plugins, among which mine. There is nothing I can do about it.

By the way, this offset.rb is a library to be used by other plugins or extensions. Which one requires offset.rb?

rv1974 · 14 Apr 2021, 18:27

at least this one:
https://sketchucation.com/forums/viewtopic.php?f=180&t=14095
damn.. from 2008 (sketchup 6) .. I have to put it down with heavy nostalgia.

fredo6 · 14 Apr 2021, 21:02

@rv1974 said:

at least this one:
https://sketchucation.com/forums/viewtopic.php?f=180&t=14095
damn.. from 2008 (sketchup 6) .. I have to put it down with heavy nostalgia.

I publish a fix with version BezierSpline v2.1b.

But, frankly, offset.rb should be avoided, because it redefines methods in base classes of Sketchup Ruby.

fredo6 · 14 Apr 2021, 21:03

NEW RELEASE 2.1b - 14 Apr 21

This release prevents a conflict with offset.rb (RickW).