Attributes - Export / Create More / Linking with Database ?
-
TIG, Your files go to the right directory now
No message that the files were completed though - if you still coded for that.It might be more useful if your three files were three pages in one Excel document.
I noticed that you cannot save adjusted column widths in the csv format. Interesting. I suppose such limitations disallows pages in csv too.
Also, area doesn't have units listed.
-
@gata said:
TIG, Your files go to the right directory now
No message that the files were completed though - if you still coded for that.It might be more useful if your three files were three pages in one Excel document.
I noticed that you cannot save adjusted column widths in the csv format. Interesting. I suppose such limitations disallows pages in csv too.
Also, area doesn't have units listed.
You should always get a dialog at the end telling you where the three files went ?
It is difficult to make multi-page csv's - that's why you get three !
The easy way to use a .csv file with formatting is to make a separate full blown Excel .xls file - using the same name seems logical (XXX-Component+Report.csv and XXX-Component+Report.xls). Then open the cvs and xls. We need to link them so that the xls keeps its formatting while the csv can be rewritten and the data reflected in the linked xls without loss of formatting [There's Excel help on this too]. Here's how..Open both files.
Have the csv at the front.
Select the cells in the csv that you want to link into the xls.
Ctrl+C to copy.
Switch to xls window.
Menu > Edit > Paste Special...
In the dialog click the bottom 'As Link' button.
Now the csv is linked into the xls.
Format the xls as you wish.
Whenever the csv changes the xls will too when it next opens.
You'll need to edit the blank fields that come mover as '0' and if the csv rows increase you'll need to re-link the csv into the xls...
See Excel Help for more details...Areas. The XYZ dims are in current units BUT the areas report in the system default 'sq inches'. I'll adjust it to come in current units - look out for an update...
-
Here's v1.5
http://www.sketchucation.com/forums/scf/viewtopic.php?p=6688#p6688
Areas are now in current units... however there is guidance on how to set areas to sq m if you work in mm etc... -
Due to the excitement of the moment I thought the written to announcement showed up at the beginning - not the end. All is well.
TIG, looks like you, Al, and vendmr are giving me a reason to delve into Excel. The ability to make custom, update-able XLS could indeed be very useful.
Recent we made a bunch of custom doors and jams. On the most part the rough opening measures and count recorded in an Excel file where correct. But somehow the people fabricating everything were often given drawings with incorrect sizes and hinge side location.
Some of my current projects includes domed ceilings and adding faux beams to a groin vault. If thing were originally laid out in SU, I wouldn't have to fudge things to fit now.
-
TIG,
ComponentReporter+ V 1.5
Outstanding script.
The parentage / outliner type report - very useful addition also.
...
The deep mining ability seems to work well after an initial (tough) trial:42 MB Model (this includes 2 x Xref'd models)
Layers 30
Component Definitions 921
Component Instances 7650
Groups 3410
...
V 1.5 went to work - 30 seconds in total to produce all reports (ie very quick).
So far the script looks really good and appears to be working well.
...
A Massive Thank You for all your hard work in producing this script.
...
Regards
Howard Leslie -
Modelhead,
You asked about what you can do with this script.
...
Increasingly clients ask for information and data related to a model - not just a pretty picture of the actually geometry / 3D views etc.
Producing a model is really just the start, not the end point in many instances.
...
Currently SU is very limited in what attributes you can attach to elements (groups / components) in a model:
Layer,Definition Name,Instance Name,Material
...
In SU you could give a Steelwork Member for example the following attributes:
Layer = 7F (7th Floor)
Definition = RSJ_10x4x25 (Component Name for Steel Beam for Example)
Instance = 1234 (Beam ID No.)
Material = Steelwork
...
Draw entire model using all your pre-drawn Steelwork Components
...
Run TIGs Script
...
Now you can query the CSV (XLS) Table in many ways eg
Filter by Floor Level - All Steelwork will be listed out (used to calc floor loadings)
How many Beams / Columns of a particular size does a building have ???
etc etc
You can now also run calcs and statistics on the components as you have a count of quantities.
TIGs script allows you to select and report by area so you can restrict the report to a given area / floor level etc.
...
Equally valid for working out quantities for regular domestic buildings / constructions
(depending upon how you draw / set your model up).
...
Material field can also be used to define contents eg pipeline contents:
water (green)
crude oil (grey)
steam (blue)
(ie not really material at all)
etc
etc
...
What would be extremely useful for SU V7 and would be top of my personal wish list (although I'm probably in a minority):
Ability to View Outliner as a Table.
Ability to Link a Field in this Outliner Table (ie an ID number of a component) to an external Database / Table and Run Querys back to the Model.
MASSIVE POTENTIAL.
(I'd definitely put this above rendering ability - but its a purely personal view).
...
Currently, unless you purchase expensive GIS software its not possible to do this with SU models.
...
Hope this gives you something to think about / answers your question.
Regards
Howard L' -
I think I found another timely use for this script - ammunition.
As I have mentioned above, there have been many expensive mistakes, mostly by the draftsmen/project managers. Myself and another person have been moved up to 'office' positions because we know how to make things. Today a 'CAD specialist' consultant was brought in to help fix the flow of information.
I described things I did and the 'specialist' thought Inventor and Solid Works would be good: but expensive and with a long learning curve. He did not know SU but he doubted the usefulness of something free. I tried to correct his perception. I found his Inventor nonsense a bit funny since I rejected Inventor 3 years ago in favor of SU.
So tonight I'm pulling together stuff to showcase this program - like how easy it is to layout a beamed, groin vault. And now this script adds a shinny, new weapon to my arsenal. So again, I thank you, very much.
-
...AND don't forget that my script only lists what is the basic built-in info within any SUP model. IF you were to give components (or any lesser or higher geometry a parts) 'attributes' then these are list-able too... Theoretically every single bit of a model could have a wealth of extra information attached to it via attributes - on a one by one basis - that could then be extracted for later use, or used in the way it interacts withother entities or the user.
Examples of using attributes are the examples of Parametric shapes, or RickW's Windowizer - in which windowized faces 'know' they are windowized and generate an appropriate context-menu entry... OR my Xref Manager that has attributes inserted into Xref skp components (or even dwf/dwg inserts) and checks to see if they are still valid or have been changed since the last insertion. It also has a method (for PC only at present since Macs vary in the way the Ruby runs at startup - but that should be fixed), whereby an attribute is attached to the whole model which then tells Xref Manager on startup if it's to check if Xrefs need updating IF you have set it to do so previously in a simple dialog...
This approach could be the basis of of full BIM BUT it needs a lot of work...
-
Here's v1.6.
It sorts out file/folder paths slightly differently, which might avoid the Mac crash. It also corrects the typo in a dialog reported by Didier...
http://www.sketchucation.com/forums/scf/viewtopic.php?p=6692#p6692
-
@chris fullmer said:
Sorry for the merciless posting, but I keep finding more ane more info. here are some more posts that might help:
http://groups.google.com/group/Sketchup-Pro/browse_thread/thread/9242c9429d3dc3a0/754c90c334e8b166?
maybe its just best to see his list of "recent" posts (almost all more than 1 year ago):
again, hope it helps.
Chris
integrating Google Spreadsheets with Google SketchUp
http://forum.sketchup.com/showthread.php?p=499535#post499535 -
But the links seems to be dead
-
Advertisement