Housebuilder

jimnaz · 1 Dec 2016, 01:17

I am designing our cabin and it will have a shed style roof. The low side will be 9' and the high side will be 12'.
Any tips on how to build the side walls since they will be at an angle? Can I do this with Housebuilder as a wall, or do I have to build each piece of lumber?

Thank you
Jim

Dave R · 1 Dec 2016, 10:32

You could use the Gable Wall tool and change the Roof Type to Shed. Figure out the pitch and go at it.

jimnaz · 1 Dec 2016, 13:54

Thanks Dave. I'll look at that option. * What plate height should I use?

Dave R · 1 Dec 2016, 14:01

Probably use the plate height of the lower wall. Play with it. You won't be wasting lumber if you get it backwards.

jimnaz · 3 Dec 2016, 16:04

Dave, that worked perfect! If I could bug you one more time. Any suggestions on how to build dormers on a shed roof?

Dave R · 3 Dec 2016, 16:09

I would probably draw them manually because it wouldn't be that hard but I suppose you could use guidelines to help layout where they need to be and drawn them like a very small house with Housebuilder. You would need to trim the walls of the dormer to fit the roof and trim the rafters where the opening would be for the dormer.

totallylost · 5 Mar 2017, 05:57

@redranger said:

@dave r said:

I guess you haven't read through this thread. The correct installation process has been give multiple times here.

From your description it sounds like you downloaded the ZIP file but it got unzipped automatically by your OS. You really ought to set it so that doesn't happen. It would make things easier.

Install Extension requires that the extension be packaged as a zip while whose file-extension is changed to .rbz. The reason Install Extension didn't work for you is you have no .rbz file to point it at.

Try again.

As for the Plugins folder, in current versions of SketchUp it does exist but it is in a hidden directory. There's no need for you to access it directly if you have files structured correctly and install them properly. Your profile indicates you're still using SketchUp 6. Is that correct?

I will say there was some amusement to reading through the entire 3 pages of comments.......but it wasn't till this post that I figured out the issue I was running into. Ended up being the auto unzip in safari preferences.

anyhow thank you everyone for the good laugh and the end result of me finally getting to use this sweet plugin!

Hi, I've been trying for days to get this plug in installed. Could you pass on where in preferences you selected to reject the automation of the zip files? thanks

Dave R · 5 Mar 2017, 12:35

Did you read what you quoted? Just use the RBZ file instead of the ZIP file and let SketchUp install it automatically and correctly. Besides, the RBZ files have been updated to work correctly in newer versions of SketchUp. The old ZIP files haven't.

facer · 8 Mar 2017, 03:35

Thank you TIG for the METRIC version.
Installed okay in Skp 2016 and Skp 2017 on 64_bit W10.

Could not get it to install correctly on Skp 2016 32_bit W10 desktop.
Any suggestions as to why that might be?

TIG · 8 Mar 2017, 11:45

No idea !
If it works OK in v2016/v2017 64bit I see no reason that it doesn't in v2016 32bit.
When you installed the 32bit version did you do it the recommended [only sure-fired] way:
find the installer's exe icon [or get it again] and right-click > context-menu > Run as administrator...
Being the admin or having admin-powers is simply not enough to ensure a good installation.
Installing it incorrectly can lead to all sorts of subtle weirdness...

You probably don't need to uninstall and reinstall, first off ensure that version of SketchUp is closed, now try running its installer exe as outlined above, and choose 'Repair'...
Try reinstalling the RBZ etc and test...

facer · 9 Mar 2017, 13:09

Thank you, TIG for your suggestions.

I managed to get it to function in 32bit W10 by disabling
plugins. Looks like there is a conflict, I did not identify which one
as I used plugin SETS.

vedremod · 5 Apr 2017, 20:21

@john sayers said:

Here you go Kris.

[attachment=0:2lf125jc]housebuilder_sections.txt[/attachment:2lf125jc]

Hi John , can you tell how to get house builder into sketchUp?
I downloaded the file but dont know how to add it in.
Thanks,
steve

Dave R · 10 Apr 2017, 11:01

@vedremod said:

@john sayers said:

Here you go Kris.

[attachment=0:l6diqpvc]housebuilder_sections.txt[/attachment:l6diqpvc]

Hi John , can you tell how to get house builder into sketchUp?
I downloaded the file but dont know how to add it in.
Thanks,
steve

Did you download the RBZ file? If so, go to Window>Extension Manager and click on Install Extension... Navigate to where you saved the RBZ file, select it, choose Open and any affirmative responses after that. It should be installed correctly.

Bryanvt · 27 Apr 2017, 18:28

Great plugin and awesome install instructions....

Still rocking 8... but CANNOT find skp file anywhere... the garage tour. I once used it and thought it was great. I have not found it in the zip files... can anyone provide link to the skp garage tour. thanks

Sleipnir · 7 Aug 2017, 19:30

So I just bought sketch up pro 2017, does anyone know if I can use house builder with this version.

Thanks I know this is probably the dead horse getting beaten over and over again.

Dave R · 7 Aug 2017, 20:06

Yes. Housebuilder does work in SU2017.

Sleipnir · 7 Aug 2017, 20:47

Thanks for all those links they worked wonderfully. I stumbled across don't the tutorial on you tube and followed extra old advise. Then I was reading these treads without being a member so didn't see your Sage level advice and links.

Thanks again.

fergusstevenson · 12 Sept 2017, 11:33

Is there anyway to get this extension to work with SU 17 pro ? - i have tried all methods and all i can get is the toolbar & icons to appear but no functionality ?

Dave R · 12 Sept 2017, 11:42

@fergusstevenson said:

Is there anyway to get this extension to work with SU 17 pro ? - i have tried all methods and all i can get is the toolbar & icons to appear but no functionality ?

Housebuilder works just fine in SU2017. See posts above yours. How about telling us exactly what "all methods" means. Apparently you're missing some important step.

bakilgallon · 26 Sept 2017, 11:02

I have Mac OS X 10.11.6; SU Make 17; with TIG's modified HB for Metric.

Problem 1: My HB doesn't have the Windows & Doors tool like the videos I watched. What I have is Wall, Gable Wall, Roof & Floor.

Does anyone know where I can get the HB (mac, metric) that has these features?

Problem 2: Additionally, from a previous thread I downloaded the timber sizes file posted by another contributor, as I am also in Oz and realised that the timber sizes I am using are not available on the list, but I don't know where I could install the file. This program is like a fiat with a sealed engine. I can't see the folder structure with components. Is there a way I could upload the file somehow with in the program like I did with the plugin through Extension Manager?