[Plugin][$] Profile Builder 2

Whaat

@Dale, turns out its two of my own plugins that have something to do with this as well although, if I de-install ProfileBuilder the warnings are gone.

I have two plugins that use:
require 'win32API'
require 'FileUtils'

I was under the impression that using 'require' would prevent these kind of issues. Am I mistaken here?
You are using the same in PB?

That is very strange because I do not 'require' those libraries for PB2.

Perhaps when you have PB2 installed, it changes the timing or sequence of your plugins being loaded which results in the error being displayed. I am guessing one of your plugins has set the following:

Sketchup.debug_mode = true

Try searching your plugins for this expression. If you find it, change it to 'false' and see if that solves your problem.

kaas

Very strange indeed.

I did find the 'debug_mode=' in 1 of my plugins and changed it to false. Also unloaded tt_solidinspector2 that was reported using that argument.

Still the same errors appear. I might do a fresh re-install of all the plugins in the near future.
thanks for looking into this.

juju

Has there been an update to PB2.1? I see it is to the top of the list when i go to EW and organize plugins by "most recent", however it doesn't show in My Extensions as needing to be updated?

Whaat

@juju said:

Has there been an update to PB2.1? I see it is to the top of the list when i go to EW and organize plugins by "most recent", however it doesn't show in My Extensions as needing to be updated?

Hi juju,

If you have 2.1 already, there is no need to update at this time. The EW probably shows it as most recent because I made a change to the EW page.

rv1974

Hm.. Sometimes I can't scale entities created with PB2

kkkl.skp

Whaat

@rv1974 said:

Hm.. Sometimes I can't scale entities created with PB2

PB2 actually disables scaling Profile entities that were created with PB2.

Because PB2 is a parametric tool, users are encouraged to use the parametric features of PB2 to change the dimensions of the entity rather than the scale tool. When the scale tool is used, things can get messed up, especially in quantity reports.

mwm5053

Dale this plugin is great, I've used the original PB for years but the ability to create my own profiles and the assembly builder really made this chain possible.
Well with the money
Thanks
Walt

Profile Builder 2 chain.jpg

PB 2 closeup.jpg

Whaat

@mwm5053 said:

Dale this plugin is great, I've used the original PB for years but the ability to create my own profiles and the assembly builder really made this chain possible.
Well with the money
Thanks
Walt

Wow, thanks Walt! That is so great to hear!

Would you be interested in copy / pasting your post into a review at the EW page?
http://extensions.sketchup.com/en/content/profile-builder-2

Cheers,
Dale

mwm5053

Done for sure

Whaat

@mwm5053 said:

Done for sure

Thanks so much!

rv1974

Whaat is it possible to add 'triangulate all' existing profiles? or at least 'triangulate on creation' option? Zillions of unique materials is a HUGEheadache when exporting to Max.
P.S. Please check possibility of

multiple unconnected curves as single path
faster path (ideally context ignoring single click )finding. Now it's too much clicking.

Whaat

@rv1974 said:

Whaat is it possible to add 'triangulate all' existing profiles? or at least 'triangulate on creation' option? Zillions of unique materials is a HUGEheadache when exporting to Max.
P.S. Please check possibility of

multiple unconnected curves as single path

faster path (ideally context ignoring single click )finding. Now it's too much clicking.

SketchUV has a triangulate feature (using right-click context menu) that should do the trick.

SketchUp Extension Warehouse

Your library of custom third-party extensions created to optimize your SketchUp workflow.

(extensions.sketchup.com)

rv1974

Of course. But if you have hundreds profiles nested here and there its hard to find each of them, enter it individually, select face, and only then triangulate.
Thats why some kind of 'triangulate on creation' is so welcomed.

bsfranza

hey there,

how can one change the behaviour of a profile to be extruded smooth or not?
thanks for a hint here

Whaat

@bsfranza said:

hey there,

how can one change the behaviour of a profile to be extruded smooth or not?
thanks for a hint here

Sorry, this is not possible. Of course you can use the SketchUp soften edges tool to adjust the smoothness after doing the extrusion.

Can you describe what your use-case is for this feature?

Frederik

Hi,
I'm a licensed user of Profile Builder 2...
Extension Manager inform that there's an update available, however, when I click the update button, I get the following message:
"Failed to update Profile Builder 2. Unable to read extension archive."

What's going on...?!?

I can't see that I can update this extension in any other way, but why can't I update this plugin...?!?

BTW... Perhaps worth mentioning that I don't have this issue with any other plugin/extension...

sfto1

I have a similar problem with SketchUV

kaas

same with PB and Artisan.. must be bought-plugins-with-multiple-email-accounts-problem again...

juju

A quick fix for this problem is to, from within SketchUp, log out of your SketchUp / Trimble account and log back in.

Frederik

@juju said:

A quick fix for this problem is to, from within SketchUp, log out of your SketchUp / Trimble account and log back in.

Already tried that trick - unfortunately without any success...

Even re-started SU and also tried signing out, closing SU, restarting Windows, started SU, signed in to the Extension Manager - no luck...

I don't have any issues updating other extensions like Skatter, Skalp, SUbD, Laubwerk, 3skeng Thea4SU etc... etc...
I'm far from a novice with this, yet I can't get the update for Profile Builder 2 to work...