[Plugin Beta] Animator - v4.4a - 01 Jun 25

ntxdave · 5 Jun 2016, 16:27

OK - If I have multiple layers to show/hide, I cannot get it to work correctly (at least the way I would like) using the duration greater than 0.

Here is an example. I have 2 spray units. I have them at different times and different durations. They both turn on correctly but they do not turn off until after the 2nd layer is to be hidden.

I will try later using the original method of setting 0 duration for each layer to show and hide and see what happens. While this works, I was hoping the previous method would work as well. Maybe I am pushing the envelope a little too far. I will have multiple situations like this is a full wash. As previously stated, if a single control for each layer can be accomplished, IMO it would be much easier to manage.

Is this way out of perspective

OK - I see what is going on is that each time any action is taken, it is for ALL layers. Thus I would need to break my example down and have 5 layer visibility captures:

At beginning to capture the initial state of all layers
Beginning of the first spray to turn that layer on and the other spray layer off
Beginning of the second spray to turn that layer on and make sure the other layer is still on
End of the first spray to turn that layer off and make sure the other spray is still on (since in the case there is actually some overlap
End of the second spray to turn that layer off

Is it out of the question to ask if it is possible to control each layer independently?

ntxdave · 6 Jun 2016, 22:28

@solo said:

Trying to figure out how to do the water spray

Have not heard/seen anything more from and was wondering where you were headed with.

JQL · 6 Jun 2016, 23:08

@solo said:

Trying to figure out how to do the water spray

Why don't you composite it using Natron or other similar software?

fredo6 · 13 Jun 2016, 20:54

New Release: Animator - v1.0v - 13 Jun 16

Maintenance and small evolutions

Reworked the Movement engine to make it more contextual. This answers some valid requests by Pilou and Dave. See video below
Objects concerned by a movement are highlighted when mouse-over in the timeline. I still need to illustrate the movement itself
Possible assignment of color to a Clip element. This may help to distinguish them.
Bug fixing, in particular when creating new films and for random cases where the offset of transaltion was 'unset'
Cosmetic changes

Note for the video:

The Rubiks cube is actualling 'orbiting' around the small cube. Orbiting means Rotation by a point which is attached to another object (versus absolute pivot).
It can however move by itself individually (the small jump)
The inside of the Rubiks cube is also animated
That why, in the second part of the video, the second instance only shows the movements within the Rubiks cube.

See main post for RBZ files

ntxdave · 13 Jun 2016, 22:26

@fredo6 said:

New Release: Animator - v1.0v - 13 Jun 16

Maintenance and small evolutions

Reworked the Movement engine to make it more contextual. This answers some valid requests by Pilou and Dave. See video below

Objects concerned by a movement are highlighted when mouse-over in the timeline. I still need to illustrate the movement itself

Possible assignment of color to a Clip element. This may help to distinguish them.

Bug fixing, in particular when creating new films and for random cases where the offset of transaltion was 'unset'

Cosmetic changes

Note for the video:

The Rubiks cube is actualling 'orbiting' around the small cube. Orbiting means Rotation by a point which is attached to another object (versus absolute pivot).

It can however move by itself individually (the small jump)

The inside of the Rubiks cube is also animated

That why, in the second part of the video, the second instance only shows the movements within the Rubiks cube.

Some good enhancements. I am playing with these a little and having a point of reference for rotating (orbiting another object) will turn out to be valuable. Already playing with that a little.

In particular, I like the ability to hover a sequence and get some visual feedback on which objects the sequence is attached to is REALLY valuable (IMO). I also like that I can color code a sequence so I can easily identify all of the sequences that belong to a given object visually. I think this will be another tool that can be used a lot.

Here is good example. I have 2 panels of the garage door that I have animated. By color coding each panel, I can easily see which sequences belong to which panel.

fredo6 · 14 Jun 2016, 04:27

About Orbiting, for the time being:

when you have clicked to select the pivot, you should click-right and choose the reference object if this is not the one taken by Animator or if you wish an absolute pivot.
The reference object for pivot is highlighted in Orange.

I'll make the GUI more explicit in a next version.

Fredo

fredo6 · 8 Jul 2016, 22:32

New Release: Animator - v1.0x - 08 Jul 16

New Features
Visual Effects: Layer visibility on-off (see tutorial )
Visual Effects: zoom
Cameras: Tracking Cameras (see tutorial )
Cameras: Scene Cameras
Support of Twilight Render Pro (thanks to Chris)
Minimize timeline(to hide all palettes when playing animation) - see tutorial
Maintenance - Fixes and adjustments
Corrections for Rotation with orbiting
Various bugs
Cosmetic changes in GUI

See main post for RBZ files

Here are two videos

1) Tracking Cameras

2) Layer visibility: State and On-Off

fredo6 · 9 Jul 2016, 11:21

chri,

Can you open the Ruby console to see what is going on

Fredo

fredo6 · 9 Jul 2016, 11:39

Chri,

Thanks.
I fixed it and republish as LibFredo6 7.0x2 9 Jul 16 (Animator is unchanged)

Fredo

fredo6 · 9 Jul 2016, 11:53

Actually, the X2 is not good. Take the 7.0x3.

Fredo

chri · 9 Jul 2016, 11:56

hi Fredo
the new release don't works for me
When i click on the icon ... nothing !

(i use SKETCHUP PRO 2014 AND WINDOWS XP )

Chri

chri · 9 Jul 2016, 11:56

@fredo6 said:

chri,

Can you open the Ruby console to see what is going on

Fredo

message in Ruby console

Error: #<NoMethodError: undefined method `definition' for #Sketchup::Group:0x968a150>
...

chri · 9 Jul 2016, 11:59

@fredo6 said:

Actually, the X2 is not good. Take the 7.0x3.

Fredo

It works for me
Thanks Fredo

Chri

pilou · 9 Jul 2016, 15:05

@unknownuser said:

AmbientOcclusionEx v1.9.5.
TheaRender v1.5 (from Animator and in Batch from Thea)
SketchFX Ex v1.0.6
Twilight Render %(#FF0000)[Pro v3.5]

It's Twilight Render Pro v2.5 ! (and I suppose also Hobby Version ? )

What is the process for use it with Twilight Render ?

chri · 9 Jul 2016, 17:47

Hi Fredo

I have a problem to ROTATE.
Please , have a look on the next GIF ( clic to anim )

Chri

ntxdave · 9 Jul 2016, 17:51

@pilou said:

@unknownuser said:
AmbientOcclusionEx v1.9.5.
TheaRender v1.5 (from Animator and in Batch from Thea)
SketchFX Ex v1.0.6
Twilight Render %(#FF0000)[Pro v3.5]
It's Twilight Render Pro v2.5 ! (and I suppose also Hobby Version ? )

What is the process for use it with Twilight Render ?

It is my understanding that only the Pro version can be used with Animator. We will have to wait and see when they post the link today.

pilou · 9 Jul 2016, 18:00

Idem! Seems there is blend of rotation / Object / General!

fredo6 · 9 Jul 2016, 21:22

@chri said:

Hi Fredo

I have a problem to ROTATE.
Please , have a look on the next GIF ( clic to anim )

Chri

Thanks for signaling. Fixed.

Fredo

fredo6 · 9 Jul 2016, 21:25

@pilou said:

@unknownuser said:
AmbientOcclusionEx v1.9.5.
TheaRender v1.5 (from Animator and in Batch from Thea)
SketchFX Ex v1.0.6
Twilight Render %(#FF0000)[Pro v3.5]
It's Twilight Render Pro v2.5 ! (and I suppose also Hobby Version ? )

What is the process for use it with Twilight Render ?

I think this is just for Pro version.

Fredo

fredo6 · 9 Jul 2016, 21:26

@pilou said:

Idem! Seems there is blend of rotation / Object / General!
[attachment=0:yeoqnx06]GIF_idem.gif[/attachment:yeoqnx06]

Is there a bug there?