[Plugin] 1001bit Tools - Architectural tools for SketchUp

gohch

hi guys,
I have been trying to catch the crashing bug for 1001bit in SU2013, the odd thing is, for some pcs, it crashes a few times and then seems to solve itself without me doing anything.
I tried to run 1001bit inside SU2014, Windows8.1;
it crashes initially, after i changed SU2014 to run under Win7 compatibility mode, it no longer crashes.
Thought I update everyone on this.
(BTW, i repeated this message across other topics that reported the crashes, hope you guys don't mind...)
Cheers!
GohCH

gohch

ok, this is really odd, i ran SU2014 in Win7 and the crash occurred,
and then i ran SU2014 on Win7 again with compatibility mode set to XP(service pack 3) and no more crashes.
Ran SU2014 on Win7 with compatibility set to Vista SP2 no crashes.
So, in Win8 i have to run as compatibility for Win7
and in Win7 i have to run as compatibility for XP or Vista
odd...

AndrewS

@gohch said:

ok, this is really odd, i ran SU2014 in Win7 and the crash occurred,
and then i ran SU2014 on Win7 again with compatibility mode set to XP(service pack 3) and no more crashes.
Ran SU2014 on Win7 with compatibility set to Vista SP2 no crashes.
So, in Win8 i have to run as compatibility for Win7
and in Win7 i have to run as compatibility for XP or Vista

I don't know anything at all about the specific plugin you're running, but I can at least tell you this: When running on any operating system newer than Vista (7, 8, 8.1), using any version of SketchUp (8, 2013, 2014), SketchUp automatically executes in Windows Vista compatibility mode. You can force it down to an older XP compatibility mode, but even if you choose something newer, the highest it will actually go is Vista.

The reason is that we have not formally taken measures to embed any OS compatibility flags within the SketchUp Windows executable. As a result, the OS assumes an incompatibility on Win 7, 8 or 8.1, and therefore automatically runs it in Windows Vista compatibility mode. In theory, it should not make any difference that you are running a newer OS, or attempt to force it into a newer compatibility mode elsewhere.

Again, I know nothing about the use or design of your specific plugin, but I would suggest that compatibility modes are likely not the source of your problems. Any perceived connection may be largely circumstantial.

Good luck,

Andrew

gohch

Thanks Andrew,
For some reason, setting it to run under compatibility mode seems to prevent the crash. Another user just reported that the tool no longer crash when he ran SU in compatibility mode too.
Thanks and cheers!

gohch

Managed to catch the BUG!!!
The bugs in the tools that caused the crashes:
"extend to edge or face"
"information between 2 points"
have been fixed in the latest rbz file:
http://www.1001bit.com/pro/download/1001bit_pro(v2.2).rbz

I have tested the other tools to work fine in SU2014,
if anyone has any issue, please let me know and i will look into it.
Thanks and cheers!
Goh

Elibjr

@gohch said:

Managed to catch the BUG!!!
The bugs in the tools that caused the crashes:
"extend to edge or face"
"information between 2 points"
have been fixed in the latest rbz file:
http://www.1001bit.com/pro/download/1001bit_pro(v2.2).rbz

I have tested the other tools to work fine in SU2014,
if anyone has any issue, please let me know and i will look into it.
Thanks and cheers!
Goh

Just to let you know Goh that the link here is corrupted and cannot be downloaded. If this is a fix please re-post it again. Thank you. I love this plugin.

EliBjr

gohch

hi EliBjr,
Can you please try the link again, i managed to download the rbz file through the link.
Thanks!
Goh

VJsku

Dear Goh,

Thank you for an excellent plugin.

I ran into a curious problem. My first attempt at using your plugin. Used it on Ver. 7 & 8 (both free).

I made walls using the plugin. Then while making openings I made the internal doors in walls of varying thickness. No problems so far. Then I started on the windows on the 'external' walls. Here if the window was punched from 'outside', they would be made but only 3" deep without the back face. If the window was made on the same external wall from 'inside' it would punch through the full depth of the wall.

Is this how it is supposed to work?

VJsku

Sent from my HTC One X using Tapatalk

PS: Adding a screenshot of the behaviour...
Create Opening 2.PNG

The left window is punched from 'outside', while the window on the right was punched from the 'inside' of the same wall. The wall is 15" thick in this example, but when an opening is created from 'outside' the opening goes 'in' by only 3".

Unfortunately I am not able to recreate this on a fresh 3d. So it seems something unique has happened to this particular model...

gohch

hi VJsku,
Thanks for the feedback. This seems to be a bug... in how the tool identify the opposite face of the wall.
I will look into this an come up with a patch.
Thanks for bringing this up!
Goh

mohamed alaa155

thnxxx

Justo79

Your site is down, temporarily I hope?

edit - all good

Mistro11

I want to bring my 1001bits Pro from Sketchup v8 free over to my Sketchup2014 Pro installation. I get a crash every time. I think I'm just doing something wrong. I uninstalled from v8 and copied the plugin files along with my Prokey file I downloaded to my 2014 plugins directory in windows XP. I cannot get it to work. I get a "syntax error" and within the message is "Invalid Break". Is there anything I should be aware of concerning 1001 and SU2014? I tried looking for it through the plugin store but do not see the pro version. Any help is appreciated.

EDIT: Nevermind, I figured it out. I went to the official site and downloaded from the link to the rbz file. It came in as a regular zip file so I just renamed the extension to rbz and was able to install and put my key in. It works now.

I left the original post in case anyone else ran into this issue.

VJsku

I tried to use the latest update. But the plugin (1001bit_freeware_v1.0.3_v1.0.5) did not work. I had to go back the the previous version (1.0.2), which of course works fine.

I get the following error on clicking on the 'Wall' on the Ruby console:

Plugins/1001bit_freeware/wall1.rb
looking for E:/Common Plugins/1001bit_freeware/wall1.rbs
loading E:/Common Plugins/1001bit_freeware/wall1.rbs
Error: #<NameError: uninitialized constant GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free::GCH_1001bit_tools::GCH_1001bit_wall1>
(eval):256:in gh_mnu_wall1' (eval):798:in load'
(eval):798:in `call'

In the zip (rbz) file I could see two copies of 1001bit_freeware.rb. One needs to reside in the main plugin folder and one more in the <1001bit_freeware> folder inside the plugin folder. The error on the console remains the same irrespective of whether the 'extra' copy is kept in the <1001bit_freeware> folder or not.

1001bit.com V1.0.5_Zip.JPG

What am I doing wrong...

PS: I use Sketchup version 7 and 8 (both free).

Thanks..

smuncky

Has anyone been having problems with 1001 on SU2013? Plugin loads fine when SU is started but when you click on any of the icons or try to start a command from the drop down menu, nothing happens.

However, everything works fine on SU2014.

Any ideas?

pilou

Just use 2014, there are less bugs inside!

smuncky

@unknownuser said:

Just use 2014, there are less bugs inside!

If I was in charge of our IT dept I would

However, most of the office is still on 2013 with no word on when everyone will switch to 2014. So that's why i'd like to figure out the problem that 1001bit is having with SU2013.

Dave R

Do you get any messages in the Ruby console when click on a tool?

Whatever are security settings for the Plugins folder?

smuncky

@dave r said:

Do you get any messages in the Ruby console when click on a tool?

Whatever are security settings for the Plugins folder?

This is the text I'm getting in SU2013.

@unknownuser said:

looking for F:/03-Tools/Software/SketchUp/PLUGIN LIBRARY/Plugins/1001bit_freeware/staircase2.rb
looking for F:/03-Tools/Software/SketchUp/PLUGIN LIBRARY/Plugins/1001bit_freeware/staircase2.rbs
loading F:/03-Tools/Software/SketchUp/PLUGIN LIBRARY/Plugins/1001bit_freeware/staircase2.rbs
Error: #<NameError: uninitialized constant GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free::GCH_1001bit_tools::GCH_1001bit_staircase2>
(eval):285:in gh_mnu_staircase2' (eval):960:in load'

This is the text I'm getting in SU2014.

@unknownuser said:

looking for F:/03-Tools/Software/SketchUp/PLUGIN LIBRARY/Plugins/1001bit_freeware/wframe.rb
looking for F:/03-Tools/Software/SketchUp/PLUGIN LIBRARY/Plugins/1001bit_freeware/wframe.rbs
loading F:/03-Tools/Software/SketchUp/PLUGIN LIBRARY/Plugins/1001bit_freeware/wframe.rbs
inside read
no language file. F:/03-Tools/Software/SketchUp/PLUGIN LIBRARY/Plugins/1001bit_freeware/language/wframe.txt
default size

Security permissions are given to all users as the plugins are on a network drive.

TIG

The v2014 error says, " ...no language file. F:/03-Tools/Software/SketchUp/PLUGIN LIBRARY/Plugins/1001bit_freeware/language/wframe.txt..."
This suggests that a file or subfolder/file is missing ?

The v2013 error suggests that Constant is not being set up.
If you copy/paste+<enter> these [in turn] into the Ruby Console what do you get ?
GCH_1001bit_loader GCH_1001bit_loader::GCH_1001bit_load GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free::GCH_1001bit_tools:: GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free::GCH_1001bit_tools::GCH_1001bit_staircase2

smuncky

@tig said:

The v2014 error says, " ...no language file. F:/03-Tools/Software/SketchUp/PLUGIN LIBRARY/Plugins/1001bit_freeware/language/wframe.txt..."
This suggests that a file or subfolder/file is missing ?

The v2013 error suggests that Constant is not being set up.
If you copy/paste+<enter> these [in turn] into the Ruby Console what do you get ?
GCH_1001bit_loader GCH_1001bit_loader::GCH_1001bit_load GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free::GCH_1001bit_tools:: GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free::GCH_1001bit_tools::GCH_1001bit_staircase2

For 2014, I did a bit more digging around and found that there is no "language" folder. I've downloaded the plugin from both the 1001bit site and the extension warehouse. Both .rbz files have the same contents except for one thing. The .rbz from the warehouse has this "extension_info.txt" file which has this inside: ID=e5b1211a-8d1a-4813-bdc3-b321e5477d7b
VERSION_ID=fbd307e2-d0f0-4880-9568-80d2032f0ffe

For 2013, I did what you asked and got this:

@unknownuser said:

GCH_1001bit_loader
GCH_1001bit_loader
GCH_1001bit_loader::GCH_1001bit_load
GCH_1001bit_loader::GCH_1001bit_load
GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free
GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free
GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free::GCH_1001bit_tools::
Error: #<SyntaxError: (eval):285: compile error
(eval):285: syntax error, unexpected $end
...1bit_free::GCH_1001bit_tools::
^>
(eval):285
GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free::GCH_1001bit_tools::GCH_1001bit_staircase2
Error: #<NameError: (eval):285: uninitialized constant GCH_1001bit_loader::GCH_1001bit_load::GCH_1001bit_free::GCH_1001bit_tools::GCH_1001bit_staircase2>
(eval):285