SketchUp 2013 ;)

[jason_maranto]

@frederik said:

@jason_maranto said:

This is the reason I turned down the "Top SketchUcator" position when I was offered it last year -- if I were in a position of representing SketchUcation I would not feel free to be this honest.

What a ridiculous argument...
Just because I'm a Top Sketchucator, it absolutely does not mean that I can't speak my mind...
If someone feel I'm too open in whatever I express, they are welcome to revoke my TS badge...

It's called freedom of speech...

Perhaps I simply see the responsibility differently than you -- to me I would not want to do anything to undermine this community, or cause problems for the fine people who run it, as long as it could be said I am somehow representing them.

@frederik said:

@jason_maranto said:

I am trying to apply external pressure.

And you'll soon see that you'll fail...

Perhaps.

I have alot of time and some money invested in SketchUp -- I do like the many good things about this program... most of which were in place from the @last regime. I would love nothing better than to see a SketchUp update come out that I could be enthusiastically behind and promote as faithfully as I have in the past.

Maybe you don't know this, but I have been a staunch defender and promoter of SketchUp in many ways up till recently -- I decided that that approach was getting me nowhere. Will this approach get more results? maybe not -- but it cannot achieve less results.

Best,
Jason.

[ilay7k]

@thomthom said:

This thread is becoming increasingly sour...

Are you want candy and prayseful thread about new 13?
Nowhere... only hot and sharp.

(i work with new toolbar, suddenly skipy shut down without bugsplating)

[thomthom]

[thomthom]

@ilay7k said:

Are you want candy and prayseful thread about new 13?

Critique is fine. People-bashing is not.

Now everyone look at the cute puppy and chill!

[Frederik]

@jason_maranto said:

Perhaps I simply see the responsibility differently than you -- to me I would not want to do anything to undermine this community, or cause problems for the fine people who run it, as long as it could be said I am somehow representing them.

To some extend I - surprisingly - do understand your argument here...
However... If I felt that something I represented was moving in the opposite direction as to where my passion is, I'd need to take my clothes and step away...
(in other words, I'd return my badge...)

This is similar to what I wrote previously about John Bacus...

@frederik said:

If JB doesn't like the strategy set forth, he's likely to step down by himself...
If JB fails to implement the strategy, he will be made redundant...

[d12dozr]

@arail1 said:

I think the negative comments are a good thing. Trimble needs to fully understand what their SketchUp customers want and expect going forward and this is the place for them to hear it.

By all means, let the team know what you don't like, but why not keep it constructive rather than negative?

[ilay7k]

Somebody is making mention of rhino3d in this thread, does it possible to make or add code snippet to it(via dialog like Jim's Web Console or A.Schreyer's Code editor) ? Like in rhino, if RMB clicking or maintain gui in it. New button linked to code.

[pilou]

@unknownuser said:

I thought it was the French

Drink only fine wines and eat succulent mashed patatoes in sauce!

[Krisidious]

I think some of you are ignoring the totality of the version...

Think of it this way... You have an old house, it's foundation is weak. You lift the house and build a brand new foundation under it, then you drop it back down looking the same and while you're at it you fix some broken things in and on the house... You also throw in a new stove and a few new doors. Now when you drive up it doesn't look or feel all that different, but that is not indicative of all the work that went into it. It's now ready for another generation.

many of you mention some of these upgrades as menial, but don't consider what kind of work went into fixing them, you act as if just because you point out a flaw it can be fixed easily... Some of them couldn't be fixed until things like this were done.

Since people just keeps ignoring the totality of the changes and simply saying "all I got is new toolbars? wtf?" I'll link the release notes again.

SketchUp 2013 Release Notes.

Attention Required! | Cloudflare

(help.sketchup.com)

I might also direct you each to review the past release notes and maintenance releases and notice that there is little difference in the amount of features and additions.

I think that all this "sour" can be attributed to "I didn't get 64 bit."

[jeff hammond]

@rich o brien said:

Can someone tell me what it auto decides in google when you type 'why i hate' into the search? I got this....

[thomthom]

@ilay7k said:

Somebody is making mention of rhino3d in this thread, does it possible to make or add code snippet to it(via dialog like Jim's Web Console or A.Schreyer's Code editor) ? Like in rhino, if RMB clicking or maintain gui in it. New button linked to code.

You're asking if Rhino has scripting abilities like the SketchUp Ruby API?
There's an overview of developer resources here: http://www.rhino3d.com/new/dev

They have something called RhinoScript for instance. Though I've never tried it myself.

[massimo]

@rich o brien said:

Can someone tell me what it auto decides in google when you type 'why i hate' into the search? I got this....

http://weeklyworldnews.com/opinion/ed-anger/6916/ed-anger-says-i-hate-the-irish/

...i hope it is a local search result or something or the world is lying to the irish.

I was always under the impression it was Norwegians that were most reviled?

P.S. Why I hate times new roman...

[ilay7k]

Sorry Tom, i forgot to point that feature which linked to button of skippy gui.
I put example from rhino. We can edit buttons and add fuctions(in-build or custom code in rhinoscript and ironpython in future) to it

---

[jeff hammond]

@ilay7k said:

Somebody is making mention of rhino3d in this thread, does it possible to make or add code snippet to it(via dialog like Jim's Web Console or A.Schreyer's Code editor) ? Like in rhino, if RMB clicking or maintain gui in it. New button linked to code.

i 1/2 understand the question but...

yeah, rhino has python scripting, rhinoscript, a macro editor, probably some other scripting stuff as well.. you (as a user) can add your own toolbar icons to launch or use one of the various other ways to launch the script (command line, keystroke, mouse button, gesture, etc.).. that app is so customizable that it can be quite overwhelming/daunting/redundant at times.

[edit]-- hmm. ok.. seeing your post above mine, i obviously didn't understand the original question

[thomthom]

Ah - it was if this Rhino feature was possible in SketchUp. I got it the wrong way around.

There is Andreas' latest device... http://sketchucation.com/forums/viewtopic.php?p=470810#p470810

Oh! Now I understand! You add a completely new command with a snippet! Now that would be cool. I like that idea. I wonder if Andreas' utility can be tweak to implement this...

[massimo]

Try with this Rich...

[Krisidious]

@unknownuser said:

OT Rich

No Irish Hate in my Data Center...

[Rich O Brien]

@massimo said:

[offtopic]Try with this Rich...

Look what I found Massinose

[/offtopic]

[massimo]

@rich o brien said:

@massimo said:

[offtopic]Try with this Rich...

Look what I found Massinose

[attachment=0:p73p6jyh]<!-- ia0 -->image 1.png<!-- ia0 -->[/attachment:p73p6jyh]
[/offtopic]

I really have a big nose...

[Rich O Brien]

You would never have known from your avatar