[Plugin] Architect Tools

thomthom

That's strange - can't quite pin-point where the error is. "eval" error..

Exactly what SketchUp version do you have?
And what TT_Lib2 version?

Did you just install Plan Tools and got the error on first run? Or did it suddenly appear?

Can you open the Ruby Console and type:
load 'tt_plan_tools.rb'

post back any error-messages.

guanjin

That's strange - can't quite pin-point where the error is. "eval" error..

Exactly what SketchUp version do you have?
And what TT_Lib2 version?

Did you just install Plan Tools and got the error on first run? Or did it suddenly appear?

Can you open the Ruby Console and type:
load 'tt_plan_tools.rb'

Starts running, and later has been an error
sketchup8M2
Latest
QQ截图20120226115449.jpg

thomthom

@guanjin said:

Starts running, and later has been an error

Can you explain more. It's very hard to debug with so little info.

And did you try the Ruby Console command?

thomthom

@hygicell said:

after installing "plan tools", "edge tools", "quadface tools" and "additional plugin folders" (I used your installer for that),
I get the following error messages:

The ones that relate to my plugins appear to be a result of not having TT_Lib2 installed. It's a library listed as a requirement for most of my plugins. You find a link to it in the Requirement section of the description.

TIG

@Frank

Please correctly install thomthom's missing Lib...

But a problem persists with my tools [almost certainly with different error messages] then perhaps you have mis-installed the 'flattentoplane' and/or 'workplane' scripts too - so, reread their threads to ensure that you also have everything installed that is needed for those tools too [e.g. the first one needs the second one to make the workplane needed to be flattened too]...
It might be that one tools error generates another, but if there are several overlapping errors it is harder to resolve,,,

I also see you have '000_AdditionPluginFolder' loading... unless you are specifically expecting files located in folders other than Plugins and Tools to be auto-loaded at startup then you do not really need this... Its error reporting is really specific to itself, but if you have mis-installed another script's files then its messages can also be somewhat confusing, since the replicate much of the normal error reports too, with overlaid info...

hygicell

after installing "plan tools", "edge tools", "quadface tools" and "additional plugin folders" (I used your installer for that),
I get the following error messages:
ScreenHunter_59 Dec. 03 10.32.jpg

more:
Error Loading File #FlattenToPlane.rb
no such file to load -- #WorkPlane.rbError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/close_gaps.rb
uninitialized constant TTError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/core.rb
uninitialized constant TT::Plugins::EdgeTools::PREF_KEYError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/divider.rb
undefined method add_item' for nil:NilClassError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/make_colinear.rb undefined method add_separator' for nil:NilClassError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/simplify.rb
undefined method add_separator' for nil:NilClassError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_QuadFaceTools/core.rb uninitialized constant TT::Plugins::QuadFaceTools::PLUGIN_IDError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/bim-tools/clsBtEntity.rb undefined local variable or method ' for main:Object

PS I have apparently solved the Bim Tools error thanks to Jan's and your and other's help
thanks to all !

greetings
Frank

hygicell

I have learned how to follow your very adequate instructions, Thom
so TT_Lib2 was and still is installed
should I delete and renew it ?

@thomthom said:

@hygicell said:

after installing "plan tools", "edge tools", "quadface tools" and "additional plugin folders" (I used your installer for that),
I get the following error messages:

The ones that relate to my plugins appear to be a result of not having TT_Lib2 installed. It's a library listed as a requirement for most of my plugins. You find a link to it in the Requirement section of the description.

TIG

Ensure you have the latest version of that Lib.

Otherwise. if you STILL get errors after updating, then it might be [the superfluous] '000_AdditionPluginFolder' throwing up errors, when you have not installed all of the scripts needed for 'my tools' ???

hygicell

@tig said:

@Frank

Please correctly install thomthom's missing Lib...

checked that, Tig, it was installed, should I delete and reinstall?
I am pretty sure it is the latest version, as I installed it the same day

But a problem persists with my tools [almost certainly with different error messages] then perhaps you have mis-installed the 'flattentoplane' and/or 'workplane' scripts too - so, reread their threads to ensure that you also have everything installed that is needed for those tools too [e.g. the first one needs the second one to make the workplane needed to be flattened too]...
It might be that one tools error generates another, but if there are several overlapping errors it is harder to resolve,,,

checked that too, both files were missing. Installed them. The errors still keep popping up

I also see you have '000_AdditionPluginFolder' loading... unless you are specifically expecting files located in folders other than Plugins and Tools to be auto-loaded at startup then you do not really need this... Its error reporting is really specific to itself, but if you have mis-installed another script's files then its messages can also be somewhat confusing, since the replicate much of the normal error reports too, with overlaid info...

[b]although it is obviously loading, I can't find it anywhere (to delete it):[/b]
ScreenHunter_60 Dec. 03 11.45.jpg

Frank
PS you guys are fabulously helpful !!!
tell me how to donate !
Thomthom already knows I do

thomthom

hm... might be that the files have ended up in VirtualStore because you don't have full permissions to the Plugins folder. Here's a way to check for that: http://sketchucation.com/forums/viewtopic.php?f=180&t=48399

It's a but difficult to debug when you've installed so much at the same time and get so many errors spread across multiple plugins. :s

hygicell

@thomthom said:

hm... might be that the files have ended up in VirtualStore because you don't have full permissions to the Plugins folder. Here's a way to check for that: http://sketchucation.com/forums/viewtopic.php?f=180&t=48399

It's a but difficult to debug when you've installed so much at the same time and get so many errors spread across multiple plugins. :s

downloaded and installed,using your installer
still same errors at startup:

Error Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/close_gaps.rb
uninitialized constant TTError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/core.rb
uninitialized constant TT::Plugins::EdgeTools::PREF_KEYError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/divider.rb
undefined method add_item' for nil:NilClassError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/make_colinear.rb undefined method add_separator' for nil:NilClassError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_EdgeTools/simplify.rb
undefined method `add_separator' for nil:NilClassError Loading File C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/TT_QuadFaceTools/core.rb
uninitialized constant TT::Plugins::QuadFaceTools::PLUGIN_ID

TIG

You do NOT have FULL security permissions aka 'Compatibility Files...'...
Click that link-button to see the mess you have unleashed...
Follow the link thomthom gave which goes a long way to resolving this...

There are several folders in the Sketchup folder - like Plugins, Materials, Components and Styles - that all need FULL permissions to allow you to add files and subfolders to them etc, and also to use some tools that will need to write log files into there etc.

To fix these folders' permissions [as an Admin] right-click each folder's icon and get Properties > Security > Edit - set to be 'FULL' - this needs to apply to all contained files and subfolders...
Simply being an Admin is NOT enough...

thomthom

Do you still have that AdditionalPlugins folder installed? Or some similar plugin?

It seems something is loading the files in incorrect order.

Did you check the virtual store?

(Please answer to each of the questions we ask. Each are important in order to debug this.)

thomthom

@tig said:

Click that link-button to see the mess you have unleashed...

To be fair, if he used the Simple Installer to install RB or RBS files they would have ended up there without his knowledge. I added a warning before the download. RBZ or ZIP should install correctly though.

But there's something else going on there. The loading errors almost indicate that the subfolders are loaded directly, before the root files are. I wonder if it's a plugin loader messing about - compounded with VirtualStore we got a nice big soup.

TIG

Could it be some 'Compatibility Files' mess up in tandem with Rick Wilson's 'Organizer.rb' [which I spy in the list] which is stupidly loading files from subfolders 'out of turn' [which incidentally seems to have been removed from Smustard.com ]
If he has to use that tool, he must understand the current onus it places on him to add files into every tool's subfolder to prevent the contents auto-loading 'support' files, either out of turn, or when not needed...

thomthom

@tig said:

Could it be some 'Compatibility Files' mess up in tandem with Rick Wilson's 'Organizer.rb' [which I spy in the list] which is stupidly loading files from subfolders 'out of turn' [which incidentally seems to have been removed from Smustard.com

Nice catch! Organizer sneaks up upon me again! (Where's that update Rick??)
Yes, that explains all these loading errors!

hygicell

I deleted organiser.rb

lo and behold !
problem solved !
thanks to all !

Frank
PS so finally, it had nothing to do with security permissions

yitzhar

same error after installing and work with its suddenly start showing error
this is what the ruby con' ...
ps - have tt_lib2 2.6 latest and this 1.22
su - latest and win7 64
and one more thing - its still working

load 'tt_plan_tools.rb'
C:/PROGRA~2/Google/GOOGLE~1/Plugins/tt_plan_tools.rb:37: warning: already initialized constant VERSION
C:/PROGRA~2/Google/GOOGLE~1/Plugins/tt_plan_tools.rb:38: warning: already initialized constant PREF_KEY
Error: #<SyntaxError: (eval):38:in read_default': (eval):38:in read_default': compile error
(eval):38: unterminated string meets end of file>
(eval):155
C:/PROGRA~2/Google/GOOGLE~1/Plugins/TT_Lib2/settings.rb:50:in []' C:/PROGRA~2/Google/GOOGLE~1/Plugins/TT_Lib2/settings.rb:90:in set_default'
C:/PROGRA~2/Google/GOOGLE~1/Plugins/tt_plan_tools.rb:45
(eval):155:in `load'
(eval):155

thomthom

There's some strange errors here. Already initialized constants seem to indicate it's being loaded twice. Maybe your're running into VirtualStore problems.
Have a look at this thread: http://sketchucation.com/forums/viewtopic.php?f=180&t=48399#p434453 You can use that tool to quickly check if you have some files that have ended up in the VirtualStore.

yitzhar

i have just chacked with the store plugin ... doesnt have it in it.
still the same error apears.