[Plugin] ExtrudeTools - Full Set

sepo · 2 Sept 2012, 19:39

I did not have any other plugins bar Twilight and Thea. Now everything looks fine apart from UV tools.

sepo · 2 Sept 2012, 19:48

and here is SU folder

panixia · 4 Sept 2012, 07:05

@tig said:

Solar-North that has NO KNOWN issues

i remember i had some trouble using solar north about a year ago. it caused bugsplats every time i tried to use it.. so i don't try to use it anymore..

TIG · 4 Sept 2012, 07:59

The Extrusion tools are 11 in number - you have managed to get an extra blank first button What does it do if you press it ?
This suggests something is [mis]loading twice ???

wind-borne · 4 Sept 2012, 08:12

@tig said:

The Extrusion tools are 11 in number - you have managed to get an extra blank first button What does it do if you press it ?
This suggests something is [mis]loading twice ???

this toolbar behavior on Mac was discussed at length early in the thread when there were only a few tools

http://forums.sketchucation.com/viewtopic.php?p=218480#p218480

sepo · 4 Sept 2012, 08:13

@tig said:

The Extrusion tools are 11 in number - you have managed to get an extra blank first button What does it do if you press it ?
This suggests something is [mis]loading twice ???

It does nothing

TIG · 4 Sept 2012, 08:15

As mentioned in earlier threads, try changing it from a horizontal to a vertical toolbar arrange.
Close and restart Sketchup and set the toolbar back to horizontal - the extra button should disappear - it seems to be a MAC only occasional glitch
The code makes an empty toolbar and adds the various tools onto it one at a time.
Somehow on a MAC if the bar is horizontal it decides it needs an empty button, before the real buttons are made - however, flipping it vertical, restarting and making it horizontal again removes this oddity... Most MAC users and all PC users never get this happening...

sepo · 4 Sept 2012, 08:50

@tig said:

As mentioned in earlier threads, try changing it from a horizontal to a vertical toolbar arrange.
Close and restart Sketchup and set the toolbar back to horizontal - the extra button should disappear - it seems to be a MAC only occasional glitch
The code makes an empty toolbar and adds the various tools onto it one at a time.
Somehow on a MAC if the bar is horizontal it decides it needs an empty button, before the real buttons are made - however, flipping it vertical, restarting and making it horizontal again removes this oddity... Most MAC users and all PC users never get this happening...

OK thanks ... I will try that when I get back home.

sepo · 4 Sept 2012, 10:15

@tig said:

As mentioned in earlier threads, try changing it from a horizontal to a vertical toolbar arrange.
Close and restart Sketchup and set the toolbar back to horizontal - the extra button should disappear - it seems to be a MAC only occasional glitch
The code makes an empty toolbar and adds the various tools onto it one at a time.
Somehow on a MAC if the bar is horizontal it decides it needs an empty button, before the real buttons are made - however, flipping it vertical, restarting and making it horizontal again removes this oddity... Most MAC users and all PC users never get this happening...

It worked...Thanks for your help Tig.

pbacot · 14 Sept 2012, 21:36

I went back to an old project file and was looking at a part and thinking, "Now how did I do that?"

Someone (my earlier self) left a message.

Thanks TIG!

Lana · 11 Oct 2012, 04:50

Thanks, thanks Tig.

dinsa2 · 18 Oct 2012, 20:16

Thank you for this great contribution....

pureinhere · 31 Oct 2012, 16:28

Hello all, first post here. Love the plugin and all the others I found hear. I have a quick question.

When I use the extrude edges by faces command, say an oval on the end of a curve, and a circle at the beginning of the curve, I often get a flat spot when the two merge together at a certain point in the middle. Is there a way for it to stay perpinddicular to the path at all times? If someone can let me know how to post an image I can do that as well. Thanks for the great plugins and your time as well.

DC

TIG · 31 Oct 2012, 17:17

You need to fix the start of both curves; otherwise the 'real start' gets taken and as these might not be near each other, you'll get a 'twist' as the surface is bent around...
So if you add a line square to each of the circle/oval perimeter so that it 'splits' it where it meets, then this tool should start each surface aligned at the same place and therefore not 'twist' it...
The alternative is to try one of Fredo's CurviLoft tools, which can give similar results...

victor hugo · 27 Nov 2012, 20:36

Hi TIG.

Is there any pdf documentation for this really cool plugins?

Thanks.

TIG · 27 Nov 2012, 22:43

Each individual tool has its own thread - each of which is linked through the zipped set's download page.
On each tool's page are detailed explanations, images etc; there are some videos for some of them too...

redgray · 12 Dec 2012, 05:48

Wow, this is what I'm looking for, thanks for this excellent tool!!!

christopher shaw · 19 Dec 2012, 16:45

Hi, ive downloaded and unzipped but nothing seems to have changed in sketchup, there doesnt appear to be a plugin menu. Can anyone help? Mnay thanks
Chris

Rich O Brien · 19 Dec 2012, 17:58

Is it enabled under preferences?

christopher shaw · 19 Dec 2012, 20:30

@rich o brien said:

Is it enabled under preferences?

Yes i believe plugins are enabled as there is a tab fro plugins between "window" and "help" at the top of the screen. But when i click on the plugin tab the dropdown only offers "cost" and there is no extrude sub heading. Any jelp much appreciated
Chris