Reverse operation of view.screen_coords

TIG

I see the point.
Here's a fuller version that avoids that [can you think of a better way?]

def pan_whole_screen_to_the_right()
  model=Sketchup.active_model
  ents=model.entities
  ants=model.active_entities
  pants=ents.to_a+ants.to_a
  hidn=pants.uniq.find_all{|e|not e.hidden?}
  model.start_operation('pants')
  hidn.each{|e|e.hidden=true}
  hgeo=model.rendering_options["DrawHidden"]
  model.rendering_options["DrawHidden"]=false
  view=model.active_view
  ip0=view.inputpoint(0,0)
  ip1=view.inputpoint(view.vpwidth,0)
  p0=ip0.position
  p1=ip1.position
  dis=p0.distance(p1)
  cam=view.camera
  eye=cam.eye
  tar=cam.target
  upp=cam.up
  eye.x=eye.x+dis
  tar.x=tar.x+dis
  cam.set(eye,tar,upp)
  hidn.each{|e|e.hidden=false}
  model.rendering_options["DrawHidden"]=hgeo
  model.commit_operation
end

thomthom

@tig said:

Here's a fuller version that avoids that [can you think of a better way?] [code]def pan_whole_screen_to_the_right()

http://forums.sketchucation.com/viewtopic.php?f=180&t=44290#p394956

TIG

Therefore we can substitute
p0=view.pickray(0,0)[0] p1=view.pickray(view.vpwidth,0)[0]
and get a simpler method because the ray's point doesn't get influenced by inferences and is made on the picture-plane, as it were...

def pan_whole_screen_to_the_right()
  model=Sketchup.active_model
  view=model.active_view
  p0=view.pickray(0,0)[0]
  p1=view.pickray(view.vpwidth,0)[0]
  dis=p0.distance(p1)
  cam=view.camera
  eye=cam.eye
  tar=cam.target
  upp=cam.up
  eye.x=eye.x+dis
  tar.x=tar.x+dis
  cam.set(eye,tar,upp)
end

thomthom

Ah, yes! Of course - no need to pick anything. I forgot that the ray contained a point that could be used directly.

TIG

Two brains are better than one [at least our combined IQs add up to around the average!!]

thomthom

I've already determined that my brain is on timeshare lease...

jpark

TIG and thomthom,

Do you guys ever sleep!!??
You gave me a plenty of assignment for the weekend; to digest all that you posted.

For your info, I am attempting to model a 'plan viewer' for blueprints which will become framework for architectural components

Thanks guys

John

thomthom

"Sl-eep"..?

jpark

Just finished reading up on view.pickray method and ran TIG's sample code. At first glance it should have worked but does not. In executing each line, I find that p0 and p1 return same value as camera eye position. See Ruby Console responses below:

p0=view.pickray(0,0)[0] Point3d(3255.11, 1479.16, 8761.61) p1=view.pickray(view.vpwidth,0)[0] Point3d(3255.11, 1479.16, 8761.61) p2=view.pickray(0,view.vpheight)[0] Point3d(3255.11, 1479.16, 8761.61) p3=view.pickray(view.vpwidth,view.vpheight)[0] Point3d(3255.11, 1479.16, 8761.61) cam=Sketchup.active_model.active_view.camera #<Sketchup::Camera:0x7ce5de0> cam.eye Point3d(3255.11, 1479.16, 8761.61) cam.target Point3d(3255.11, 1479.16, 127.281) cam.up Vector3d(0, 1, 0)

How could this be? I thought I understood pickray method but NOT

Off the topic note: where can I find instruction on how to annotate posting w/ codes, images, smiles, etc ...

John

TIG

I added some 'ruby' tags to make it clearer...

I hope this is not ALL of the code...
Have you set the view and so on earlier ?
IF so... you don't use
cam=Sketchup.active_model.active_view.camera
but
cam=view.camera
???
My code is a working example.......

Dan Rathbun

@jpark said:

Off the topic note: where can I find instruction on how to annotate posting w/ codes, images, smiles, etc ...

There is a "hard to find" link on each message "POST A REPLY" page, in the right column, beneath the "Smilies" list.

Notice how the line "BBCode is ON" has a link ??

It leads you to a user guide for the code tags.

Most of these usable tags have toolbar button "inserters" already set up for you to use. You just click the button, it inserts the tag. and positions the cursor between the tags so you can type text (or paste text,) into them.

jpark

@dan rathbun said:

There is a "hard to find" link on each message "POST A REPLY" page, in the right column, beneath the "Smilies" list.

Now I'm enlightened Thanks Dan

@tig said:

I hope this is not ALL of the code...

No this is an output of individual Ruby Console execution. This is my attempt to debug each line of your sample code to check each variable's current value. Programming is my hobby and I just picked up Sketchup and Ruby couple of months ago so I have a lot to learn.

Back to pickray method - All screen postions (ie p0, p1, p2, and p3) return different value yet pickray method of these points return identical 3D point as camera eye position but with different vector. How come?

John

thomthom

eh.. TIG, I think we both did a brain-fart. We have to do a raytest - otherwise the ray will return a point which is based on the camera eye... because all pickray origin from the camera eye.

thomthom

Though, at 2:30 it's hard to process these thigns...

TIG

Here's a much better version that uses planes, lines, vectors, and takes arguments to change panning from right/left and up/down etc - allowing a toolbar button set to be easily made...

require 'sketchup.rb'
### Usage TIG.screenpan(1), where the argument can be either 1, -1, 2 or -2
### 1=right, -1=left, 2=up, -2=down
### make 4 'arrow' buttons in a toolbar using the 4 alternative commands.
module TIG
    def self.screenpan(direction=1)
        m = Sketchup.active_model
        v = m.active_view
        c0 = v.corner(0)
        c1 = v.corner(1)
        c2 = v.corner(2)
        c = v.camera
        e = c.eye
        t = c.target
        up = c.up
        di = c.direction
        pa = [e, di]
        i0 = v.inputpoint(c0[0],c0[1]).position
        i1 = v.inputpoint(c1[0],c1[1]).position
        i2 = v.inputpoint(c2[0],c2[1]).position
        p0 = Geom.intersect_line_plane([i0,di], pa)
        p1 = Geom.intersect_line_plane([i1,di], pa)
        p2 = Geom.intersect_line_plane([i2,di], pa)
        vx = p0.vector_to(p1)
        vy = p0.vector_to(p2)
        case direction
          when 1
            c.set(e.offset(vx), t.offset(vx), up)
          when -1
            c.set(e.offset(vx.reverse), t.offset(vx.reverse), up)
          when 2
            c.set(e.offset(vy.reverse), t.offset(vy.reverse), up)
          when -2
            c.set(e.offset(vy), t.offset(vy), up)
       end
    end
end

jpark

TIG,

It works great and I actually understood your program steps. Now I need to dig into reference material to create tool bars.

Thanks for your help

John

TIG

Insert this whole block of code inside the mIN 'module' near the beginning - between
module TIG
and
def self.screenpan(direction=1)
Then put the whole of the code in a file called 'TIG-screenpan.rb' in the Plugins folder and restart...
Put your buttons icon .PNG files inside a subfolder in Plugins called 'TIG-screenpan'.
Name then as shown, for small/large icons, for each of the 4 buttons, 8 PNGs in all...
This is the menu code...

### menu
unless file_loaded?(File.basename(__FILE__))
  cmd1=UI;;Command.new('TIG.screenpan_RIGHT'){self.screenpan(1)}
  cmd1.tooltip=('TIG.screenpan_RIGHT')
  cmd1.status_bar_text=('TIG.screenpan_RIGHT; Pan RIGHT..')
  cmd1.small_icon=File.join('TIG-screenpan', 'pan1-16.png')
  cmd1.large_icon=File.join('TIG-screenpan', 'pan1-24.png')
  cmd_1=UI;;Command.new('TIG.screenpan_LEFT'){self.screenpan(-1)}
  cmd_1.tooltip=('TIG.screenpan_LEFT')
  cmd_1.status_bar_text=('TIG.screenpan_LEFT; Pan LEFT..')
  cmd_1.small_icon=File.join('TIG-screenpan', 'pan_1-16.png')
  cmd_1.large_icon=File.join('TIG-screenpan', 'pan_1-24.png')
  cmd2=UI;;Command.new('TIG.screenpan_UP'){self.screenpan(2)}
  cmd2.tooltip=('TIG.screenpan_UP')
  cmd2.status_bar_text=('TIG.screenpan_UP; Pan UP..')
  cmd2.small_icon=File.join('TIG-screenpan', 'pan2-16.png')
  cmd2.large_icon=File.join('TIG-screenpan', 'pan2-24.png')
  cmd_2=UI;;Command.new('TIG.screenpan_DOWN'){self.screenpan(-2)}
  cmd_2.tooltip=('TIG.screenpan_DOWN')
  cmd_2.status_bar_text=('TIG.screenpan_DOWN; Pan DOWN..')
  cmd_2.small_icon=File.join('TIG-screenpan', 'pan_2-16.png')
  cmd_2.large_icon=File.join('TIG-screenpan', 'pan_2-24.png')
  ###
  toolbar=UI;;Toolbar.new('TIG.screenpan')
  toolbar.restore if toolbar.get_last_state==TB_VISIBLE
  toolbar.add_item(cmd1)
  toolbar.add_item(cmd_1)
  toolbar.add_item(cmd2)
  toolbar.add_item(cmd_2)
  sub=UI.menu('Tools').add_submenu("TIG.Screenpan...")
  sub.add_item(cmd1)
  sub.add_item(cmd_1)
  sub.add_item(cmd2)
  sub.add_item(cmd_2)
end
file_loaded(File.basename(__FILE__))
###

[UNTESTED!]

jpark

TIG

Once again, I thank you for your generous assistance

With 1 minor correction, this is working as intended.

@unknownuser said:

sub=UI.menu('Tools').%(#FF0000)add_item

Changed add_item to add_submenu

This is the only line of code I did not fully understand

@unknownuser said:

unless file_loaded?(File.basename(FILE))

I know this is to make sure the plugin load once, but can you explain 'basename(FILE)'?

Moving onto to my next challenge, what method do I need to look at in order to display an area of image whose vertices are known (sort of like zoom window without maually selecting zoom area)

John

TIG

Again.... untested stupid typo !
Sorry!
add_item adds a command directly to that menu
sub=...add_submenu adds a 'submenu' to that menu,
in which you can then use add_item...
I changed original in case others copy it...

The system variable __FILE__ gives the full-path of each loading .rb script [fails if compiled as a .rbs!].
There are many 'File' methods, so if it is say
'C:/Program Files/Google/Google SketchUp 8/Plugins/xxx.rb'
File.basename(__FILE__) >>> 'xxx.rb'
and also
File.basename(__FILE__, '.*') >>> 'xxx'
File.extname(__FILE__) >>> '.rb'
File.dirname(__FILE__) >>> 'C:/Program Files/Google/Google SketchUp 8/Plugins'
etc etc...
Of course you can use it with and string that is a 'file-path' - like you'd get from an 'open' dialog etc...

I'll sleep on your last question...

inteloide

Hello,

I want to resurrect this topic ;o)

I'm looking for a way to align the model in the view to have the View.corner(0) align with the left bottom of viewport (screen).
I tried your code above, unsuccessfully : looks like the model is out of the viewport.

The idea would to write a script the slide the model, in top perpencidular view, from left to right, or from top to bottom, keeping current zoom.

Looks like my request is similar to the original request of this thread but, I cannot achieve what I want...

Does anybody have an idea ?

Thank you in advance.

Inteloide