[Plugin] TextureTools

massimo

@tig said:

@massimo said:

A detail: the first time you start the "nudge" and the "shunt" tools you are obliged to input an increment because if you confirm the default number by just pressing "Ok" they don't work.

I'll look at it...
EDIT:
I recheck and it works fine...

I have cm and yes it's the latest version, so i think it's not a matter of small lengths. I think that the culprit is the "." (just noticed the dot). So the default "1.0" should be "1,0" for me. Here you have the ruby console anyway.

Error; #<ArgumentError; Cannot convert "1.0" to Length>
C;/Program Files (x86)/Google/Google SketchUp 7/Plugins/TextureRotate.rb;282;in `to_l'
C;/Program Files (x86)/Google/Google SketchUp 7/Plugins/TextureRotate.rb;282;in `reset'
C;/Program Files (x86)/Google/Google SketchUp 7/Plugins/TextureRotate.rb;276;in `activate'
C;/Program Files (x86)/Google/Google SketchUp 7/Plugins/TextureRotate.rb;410;in `select_tool'
C;/Program Files (x86)/Google/Google SketchUp 7/Plugins/TextureRotate.rb;410
C;/Program Files (x86)/Google/Google SketchUp 7/Plugins/TextureRotate.rb;410;in `call'

EDIT

@unknownuser said:

IF you want to have a default find @@u, @@v and @@d values near the start of the two tools class initialize and change the numbers there

Changed "1.0" to "1,0" and now seems to work fine.

EDIT 2
Tried to change also the "angle" default parameter to "90,0" but it doesn't work. So now I have the "rotate" which works with "dot" and the "shunt+nudge" with "comma".

Jean-Luc Clauss

Nice tool for geomodeling.
Thank you so much Tig !

TIG

Massimo

I hadn't anticipated you weird Eurpoeans using a ',' as a decimal point rather than a sensible '.'
I can easily trap that in the code... I'll release an update later today - it should also have new tools added - TextureScale and TextureTweak...

vidy

Wooow.. like this TIG, thank you..
my wish, hopefully it could do also on the complex shape surface like sphere or cylinder..

regards,

TIG

Here's v1.4 http://forums.sketchucation.com/viewtopic.php?p=329765#p329765
New tools have been added - TextureScale & TextureTweak [Scale by Arrows], and TextureAdjust [Rotate by Arrows]. Some button png files have been adjusted.
'Locale' use of a ',' instead of a '.' as a decimal-point now works in all dialogs.

Please read the usage note for each tool...

Feedback please...

massimo

Wonderful.
A little issue is that now i have to do something like this when input values:
rotate-->dot
adjust-->dot
shunt-->comma
nudge-->comma
scale-->dot
tweak-->dot
While in SU i use always comma.

Oxer

Thanks TIG, it works fine on Mac, only one thing the dot and comma don't works on all tools.

TIG

@massimo said:

Wonderful.
A little issue is that now i have to do something like this when input values:
rotate-->dot
adjust-->dot
shunt-->comma
nudge-->comma
scale-->dot
tweak-->dot

Massimo [& Oxer]

What's your 'locale' ?
How do you normally input 'decimal-points' ?
In the UK/US it's 1.234 and I know in EU etc its [perversely] 1,234
The rotate/scale tools take 'float' numbers because angles and scaling are always in that format - the 'decimal-point' is determined by the system setup/locale not by me... 'I think 'floats' always use a '.' ??
The shunt/nudge tool takes a 'string' as its input since the user might type '10mm' or '1"' irrespective of their current units, and if they type '1' and their current units are 'cm' it is taken as '1cm', using the API's .to_l method. When the user enters a decimal-point it should be in the format that is determined by the system setup/locale not by me... So '1.234' or '1,234' - however I'm amazed that the two types of input are handled different.
Can you do a test in the Ruby Console for me... type these [exactly as they appear here] and report the result:
1.23.class 1,23.class 1.23.to_l 1,23.to_l '1.23'.to_l '1,23'.to_l
Depending on your feedback I COULD try trap it to change the input for the 'string' type so if you entered '1.23' and it couldn't be made into a length in length='1.23'.to_l then it'd try length='1.23'.tr('.',',').to_l - that way all of these tools would expect you always to use a '.' BUT it would substitute a ',' if your system needed it...
The code to swap is


  u=u.to_l
  v=v.to_l

which becomes


  begin
    u=u.to_l
  rescue
    u=u.tr('.', ',').to_l
  end
  begin
    v=v.to_l
  rescue
    v=v.tr('.', ',').to_l
  end

AND then

  @d=@@nudge.to_l

which becomes


  begin
    @d=@@nudge.to_l
  rescue
    @d=@@nudge.tr('.', ',').to_l
  end

massimo

Well TIG in SU it's always comma or semicolon (for example when drawing a rectangle) for me, even the plugins, while in CAD, for example, it's always dot...
Anyway here is what i get in the ruby console:

1.23.class
Float

TIG

@massimo said:

Well TIG in SU it's always comma or semicolon (for example when drawing a rectangle) for me, even the plugins, while in CAD, for example, it's always dot...
Anyway here is what i get in the ruby console:

1.23.class
> Float
>

I'd like the whole list please ?
I know in EU etc in the SKP's UI the '.' swaps with the ',' and then the ',' with the ';' BUT in the Ruby API I must always use a '.' as the decimal-separator, ',' as the list-separator and ';' as a line-break...
However I'd have expected that the SUp UI would seamlessly swap float '.' for ',' when displayed inputed in a UI.inputbox() to suit the locale, as it seems to take ',' in strings to convert to 'lengths' ??

massimo

@unknownuser said:

I'd like the whole list please ?

I've copied and pasted ALL the text you posted, sorry...
Here you have the results of every single line

1.23.class
Float
1,23.class
Error; #<SyntaxError; (eval);894; compile error
(eval);894; syntax error
1,23.class
  ^>
(eval);894
1.23.to_l
1.23
1,23.to_l
Error; #<SyntaxError; (eval);894; compile error
(eval);894; syntax error
1,23.to_l
  ^>
(eval);894
'1.23'.to_l
Error; #<ArgumentError; (eval);894;in `to_l'; Cannot convert "1.23" to Length>
(eval);894
'1,23'.to_l
0.484251968503937

Oxer

Hi TIG,
I had probe to type the text in Ruby Console and this the result:
Captura de pantalla 2011-05-20 a las 14.34.13.JPG

I'm in Spain (EU) and i use metric units.

TIG

So, as I suspected...
I'll reissue a trapped version that will take '.' or ',' as the decimal-separator in the inputbox for every tool, BUT it will if it's a string value it'll convert it to ',' to suit your locale and make a length from it if it has to... entering a number with a ',' it WILL work without failing [IF the locale supports] BUT it'll convert it back into a '.' when you OK the dialog...
Watch for an update...

jgb

Ah yes, A period is as important to a programmer as it is to his girlfriend.

notareal

@tig said:

Massimo

I hadn't anticipated you weird Eurpoeans using a ',' as a decimal point rather than a sensible '.'
I can easily trap that in the code... I'll release an update later today - it should also have new tools added - TextureScale and TextureTweak...

...waiting for the fix.

TIG

Here's v1.5 http://forums.sketchucation.com/viewtopic.php?p=329765#p329765
Irrespective of their locale, users may now type a '.' OR a ',' as a decimal-separator, depending on their preference, for any of the tools' dialogs - issues with conversion of strings to lengths from potential locale-wrong input is addressed in the code, 'behind the scenes'.

Feedback please...

broomstick

@tig said:

Here's v1.5 http://forums.sketchucation.com/viewtopic.php?p=329765#p329765
Irrespective of their locale, users may now type a '.' OR a ',' as a decimal-separator, depending on their preference, for any of the tools' dialogs - issues with conversion of strings to lengths from potential locale-wrong input is addressed in the code behind the scenes.

Feedback please...

Just tried it, win7 64 bit skp 8... works fine and I must say this is one of the best plugins ever made!!!