sketchucation logo sketchucation
    • Login
    ℹ️ Licensed Extensions | FredoBatch, ElevationProfile, FredoSketch, LayOps, MatSim and Pic2Shape will require license from Sept 1st More Info

    [Plugin] ExtrudeTools - Full Set

    Scheduled Pinned Locked Moved Plugins
    636 Posts 178 Posters 740.2k Views 175 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • TIGT Offline
      TIG Moderator
      last edited by

      Here's an updated zip http://forums.sketchucation.com/viewtopic.php?p=217663#p217663
      The main changes are...
      The 'Extrusion Toolbar' title's db() translation is fixed with a new lingvo file.
      In EEbyVector you can now end an 'extrusion' in with a 'double-click'.
      In EEbyFace if there is no 'suitable' face in the selection it's trapped with error message.
      In EEbyLathe it now undoes in fewer 'steps' - ~one for each 'optional dialog'.
      In EEbyRailsToLattice the missing db() on 'Processing...' in corrected.

      TIG

      1 Reply Last reply Reply Quote 0
      • TIGT Offline
        TIG Moderator
        last edited by

        Here's an updated set http://forums.sketchucation.com/viewtopic.php?p=217663#p217663
        ExtrudeEdgesByRailsByFace is now trapped to stop you selecting a non-flat face and breaking Sketchup!
        the lingvo files are also updated to suit.

        TIG

        1 Reply Last reply Reply Quote 0
        • S Offline
          smiley007
          last edited by

          Thanks very much for these exellent tools.

          1 Reply Last reply Reply Quote 0
          • TIGT Offline
            TIG Moderator
            last edited by

            Here's an updated set http://forums.sketchucation.com/viewtopic.php?p=217663#p217663
            There a new tweak to EEbyRailsByFace to catch no face selected or an empty selection at the start [as well as any 'inappropriate' selections].
            Also two of the ES lingvo files have some minor rephrasing by Defisto [again!]...

            TIG

            1 Reply Last reply Reply Quote 0
            • C Offline
              cdurkin
              last edited by

              Hello
              Ive just added the extrude tools zipped set to my ruby library but, despite getting the plugins to work on version 7, I'm having difficulty getting them to work with SU version 8. Has anyone else had the same problem??? know how to fix??

              1 Reply Last reply Reply Quote 0
              • TIGT Offline
                TIG Moderator
                last edited by

                cdurkin

                What error messages do you get at startup or later in the Ruby Console when you try to use the tool ?

                It works fine for most users in v8, if it's correctly installed.
                Hove you copied all of the required files and sub-folders over ?
                Make sure there are none in the wrong place too, even if you have done a full install from the zip you might have some files misplaced and causing clashes...

                Their has been one report of a clash with SketchyPhysics in v8 [I suspect that SP rewrites a SUp base-class method ill-advisedly that some EEby... (and other's) tools are using... but it's not yet established/resolved].
                If you have SketchyPhysics try removing its .rb files from Plugins temporarily and see if that fixes the glitch...

                TIG

                1 Reply Last reply Reply Quote 0
                • C Offline
                  cdurkin
                  last edited by

                  Hello again
                  The Specific problem has to do with the icons on the toolbar and heading eg(extrude edges on edges ect.)on the menubar. Some of them work and others don't. It sounds like it may be the folder allocation problem you suggested. I have all files that came with the plugin in the the TIGtools folder accept the 10 extrudeEdgesByEdges.rb.......to...extrudeEdgesByVector.rb files which are directly in the plugins folder. The icons on the toolbar that seem to be giving my trouble are:
                  extrudeEdgesByEdges.rb
                  extrudeEdgesByFace.rb
                  extrudeEdgesByFaces.rb
                  extrudeEdgesByRails.rb
                  extrudeEdgesByRailsByFace.rb
                  extrudeEdgesByRailsToLattice.rb
                  I can use all the commands, it even says in the command prompt at the bottom of the screen the the geometry is being made, yet no matter how long i wait the extruded geometry does not appear.

                  extrudeEdgesByLathe.rb
                  extrudeEdgesByVector.rb
                  extrudeEdgesByLoft.rb all work fine

                  If it is the file allocation problem do you know which other files I should move?

                  Thanks

                  1 Reply Last reply Reply Quote 0
                  • TIGT Offline
                    TIG Moderator
                    last edited by

                    Get the latest zip from the first post in this thread...
                    Extract everything into a temporary folder - keeping all sub-folders and contents intact.
                    Move ALL of the the files/sub-folder(with their files) into the v8 ../Plugins/ folder.
                    Overwriting when prompted to do so.
                    Check everything that is now in the ../Plugins/TIGtools/ folder... AND if there's a file with the exact same name in the main ../Plugins/ folder remove it from the ../Plugins/ folder - it should be in the sub-folder!

                    Now everything should work fine.

                    Run the tools with the Ruby Console open to see if there are error messages.
                    If you still get errors - if you have SketchyPhysics installed in v8 temporarily remove its .rb files to disable it and see what happens.

                    If it's still not working post the error messages here... 😒

                    TIG

                    1 Reply Last reply Reply Quote 0
                    • V Offline
                      Vicspa
                      last edited by

                      Hi Tig,
                      All your extrude tools seem not to be working for me in version 8.
                      I think I'm doing everything right, but it gets to a point where nothing more happens. ( see enclosed jpeg )

                      WHAT am I doing wrong??????? 😞


                      Capture.JPG

                      1 Reply Last reply Reply Quote 0
                      • R Offline
                        Rip Tanion
                        last edited by

                        @unknownuser said:

                        WHAT am I doing wrong??????? 😞

                        I'm still using SU7, but I still think I may be able to help you. I'm assuming you are using Edges by Rails? If so, here's what I think you doing wrong. Looks to me as if you are choosing the wrong profiles and rails. (Blue=profile, purple=rail) You've chosen the bottom circle as the profile, while the open curve and the top circle you've chosen for the rails. I tried to duplicate this in SU7, choosing the bottom circle for the melding profile as well, and SU7 crashed. Even if it didn't crash, I suspect it would have yielded a bizarre shape, not what I suspect you are looking for.

                        Try this:
                        Choose the open curve as the profile, and the top and bottom circles as the rails, and the open curve again for the melding profile like so
                        eebr1.png

                        That should give you something like this.
                        eebr2.png

                        Now, if you want a symmetrical shape, simply select only the open curve—not the circles, just the open curve—and then choose EE by Lathe. Set both axis point on the same vertical axis that runs through the center of the circles, and set the rotation angle to 360. That will give you something like this:
                        eebr7.png

                        Hope this helped you.

                        1 Reply Last reply Reply Quote 0
                        • C Offline
                          caarloos82
                          last edited by

                          thank you for your work, such an amazing plugin!

                          cheers!

                          1 Reply Last reply Reply Quote 0
                          • C Offline
                            Charlie__V
                            last edited by

                            Bravo Tig...........Bravo!!!

                            Thanks lots,
                            Charlie

                            Precision M1710/Win 7 Pro 64 bit/i-7 6920 Quad core 2.9 Ghz -3.8/16Gb ram/NVIDIA M5000M 8Gb

                            1 Reply Last reply Reply Quote 0
                            • Bob JamesB Offline
                              Bob James
                              last edited by

                              This is just such an incredible set of plugins that I had to jump into this thread to say Thank You again. 😍

                              i7-4930K 3.4Ghz, 2x GTX780 6GB, 32GB DDR3-1600 ECC, OCZ Vertex 4 500GB, WD Black 3TB, 32TB NAS, 4x 27" Monitors, SpaceMouse Pro, X-keys XK-60

                              1 Reply Last reply Reply Quote 0
                              • J Offline
                                junoswayam
                                last edited by

                                excellent stuff... Thank you very much

                                1 Reply Last reply Reply Quote 0
                                • eebeeE Offline
                                  eebee
                                  last edited by

                                  Fantastic! Just what I needed! Works great!! 😍

                                  -ed

                                  1 Reply Last reply Reply Quote 0
                                  • BoxB Offline
                                    Box
                                    last edited by

                                    Just a thought Tig for another useful extrude.
                                    Extrude Edges by Rotation.

                                    I can see many uses for it. Most of them are possible another way but it would be nice to simply select an edge or face and extrude it around a point, much like extrude by vector. Handy for doing curved corners in pipes or adding a radius surface to a box etc.

                                    Just an idea as I find I use your extrusion tools all the time and this is the only one I seem to miss.

                                    1 Reply Last reply Reply Quote 0
                                    • TIGT Offline
                                      TIG Moderator
                                      last edited by

                                      @box said:

                                      Just a thought Tig for another useful extrude.
                                      Extrude Edges by Rotation.

                                      I can see many uses for it. Most of them are possible another way but it would be nice to simply select an edge or face and extrude it around a point, much like extrude by vector. Handy for doing curved corners in pipes or adding a radius surface to a box etc.

                                      Just an idea as I find I use your extrusion tools all the time and this is the only one I seem to miss.

                                      Can't you already do this with my EEbyLathe 😕 😕 😕

                                      TIG

                                      1 Reply Last reply Reply Quote 0
                                      • BoxB Offline
                                        Box
                                        last edited by

                                        Indeed you can, I just didn't know how, now I do. Thanks again.

                                        1 Reply Last reply Reply Quote 0
                                        • C Offline
                                          cupko
                                          last edited by

                                          Hi TIG,
                                          Thanks for plugins 👍 .

                                          I have problem with Extrude Edges By Edges plugin. I draw two bezier curves and when I want to use EEbE cursor changes to white, but I can't select curves? Nothing happens?

                                          SU ver. is 7.0.10247

                                          Thanks

                                          1 Reply Last reply Reply Quote 0
                                          • TIGT Offline
                                            TIG Moderator
                                            last edited by

                                            Thanks Pilou for the help...

                                            As was said... unlike most of the the other EEby.. tools that require you to pick 'curves' to make the mesh, EEbyEdges requires that the two sets of edges are assembled into two separate groups [you then pick these two groups using the tool]. This grouping allows you to use edges that are not necessarily parts of curves, or indeed even connected together at all, in the EEbyE.. operation...

                                            TIG

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 8
                                            • 9
                                            • 10
                                            • 11
                                            • 12
                                            • 31
                                            • 32
                                            • 10 / 32
                                            • First post
                                              Last post
                                            Buy SketchPlus
                                            Buy SUbD
                                            Buy WrapR
                                            Buy eBook
                                            Buy Modelur
                                            Buy Vertex Tools
                                            Buy SketchCuisine
                                            Buy FormFonts

                                            Advertisement