Need help Please!

TIG

Here's a quick version using my EEbyRails.
You need to simplify the 'skeleton' into profiles across the boat [bulkheads?] and rails down the 'keel' and the 'bows'.
Make each of these a curve using weld.
Try to keep the same number of segments in the profiles/rails - you haven't got that currently and a 'lumpy' mesh results where the various grouped meshed meet and need exploding together at the end...
Do a pair of profiles and rails in turn until you have completed the 'hull'.
Make it a component and mirror the halves together... boat.skp

roadie3rd

Thanks TIG

I'm really sorry to be a pain again
This is my first attempt at an 'organic' shape and im finding it quite tricky

how would I give the hull a thickness of say 60mm to the outside edges is this possible?
If so how

Cheers Mark

numbthumb

Take a look at this and see if it helps http://forums.sketchucation.com/viewtopic.php?f=323&t=6708&st=0&sk=t&sd=a&hilit=joint+push+pull

roadie3rd

Why did i agree to do this for my father inlaw
thought id get some brownie points stacked up for future use but obviously its proving harder than expected

Just so people know this is what im trying to create in sketchup

Im finding it quite hard to get the hull started. Tigs help is great many thanks and has got me started a bit but im still finding it hard to get my head round

Thanks for all the help anymore would be greatfully accepted

Cheers Mark

roadie3rd

@unknownuser said:

numbthumb wrote:
Take a look at this and see if it helps viewtopic.php?f=323&t=6708&st=0&sk=t&sd=a&hilit=joint+push+pull

Ive tried this and it keeps crashing the model and shutting sketchup
i think the model is too complex and has a spas attack and closes it.
Cheers anyway is a useful plugin
Mark

pilou

What the name of the boat model?

ely862me

Roadie,first of all u should be sure to find and download some blueprints(without them is very hard),then search for lot of reference images,then(but not last) u should have some average skills in sketchup..and only after these steps start building it. imho

All the best!

Elisei

numbthumb

Or maybe you can give this a try http://www.delftship.net/delftship/index.php?option=com_content&view=article&id=31:delftship-free&catid=13:products&Itemid=4
It exports .DXF, and .OBJ AFAIK, so you can load these in SU.

roadie3rd

@ely862me said:

Roadie,first of all u should be sure to find and download some blueprints(without them is very hard),then search for lot of reference images,then(but not last) u should have some average skills in sketchup..and only after these steps start building it.

Ive got the plans he built the boat to which are printouts which ive caded up the drawings in autocad. The guy who designed the boat drew it all by hand old school style and doesnt have downloadable plans. Plus you have to pay for the plans which is about £500

I have loads of images ive taken of the boat and have been given by my father inlaw

I have average skills in solidworks as i use it at work for architecture concepts but its mostly straight lines and curves not organic shapes. Ive used sketchup lots but cant get my head around the the hull shape and making it work. Ive drawn the majority of the other bits to attach to the hull but the hull is the most important bit.

Mark

roadie3rd

@unknownuser said:

What the name of the boat model?

Its a Golant Gaffer

roadie3rd

@numbthumb said:

Or maybe you can give this a try http://www.delftship.net/delftship/index.php?option=com_content&view=article&id=31:delftship-free&catid=13:products&Itemid=4
It exports .DXF, and .OBJ AFAIK, so you can load these in SU.

cheers for this ill give it a go on the weekend

roadie3rd

ive found these pics if people want them

full side

top/side

Jim

Give the guy a break - he doesn't know where to start. Posting a model of a completed hull (even if it lacks accuracy) doesn't help much because it doesn't show how to set it up.

ely862me

I don t see u struggling too much making it..

Here is the hull,if i don t see you finishing it ,means u don t wanna make it..

Happy sketching!

Elisei

Golant Gaffer hull by EliseiDesign.skp
BTW The halves are components,u can just work at one of them and the other will update by itself.

EDITED: A small mistake i made without my will, model uploaded again .

ely862me

Jim,in this case...should i remove the files?
Roadie,sorry if i m(was) a bit harsh to you!

All the best!

Elisei

mac1

@roadie3rd said:

@unknownuser said:

What the name of the boat model?

Its a Golant Gaffer

roadie3rd
Additi0nal info for you ref problen areas:http://sketchup.google.com/3dwarehouse/details?mid=1f56117edc6c5690ab9c83967811b1f7 It looks to me like a problem with the rail profiles 3 to 4 down. I used the shown cutting plane to get intersection points with the rails . You should then be able to create good bulk head profiles for TIG's suggestion pending issue with the rails

Jim

@ely862me said:

Jim,in this case...should i remove the files?
Roadie,sorry if i m(was) a bit harsh to you!

All the best!

Elisei

No no, you were not harsh. I think this is a tough model to start with.

chrisjk

Elisei,

I'd be interested to learn how you did the modelling of the surface. I can't get it that smooth. I used TIG's EEBR and as can be seen, I get "pleats" at the front.

TIG

Make several equally segmented 'bulkheads' and so it in pieces...
Profile 2 for one becomes profile 1 for the next - split the rails a long the 'keel' and 'side'

chrisjk

Thanks TIG.