[Plugin] Manifold v2.2

thomthom

Just noticed, when I reload your script, load 'manifold.rb' it keeps adding more menu items.

Think it's because of the last line: file_loaded(__FILE__)
Should it not be: file_loaded(File.basename(__FILE__)) ?

thomthom

Just realised the cause of the error I reported earlier:

You're calling msg=(db("Manifold: Orienting Faces")) from within the class Sketchup::Face scope, while db() is defined within the Manifold class.

Making db() into a Class method instead of Instance method def self.db(string) and changing

msg=(db("Manifold: Orienting Faces")) to msg=(Manifold.db("Manifold: Orienting Faces")) (line 304)
and
puts(db("Manifold: orient faces aborted.")) to puts(Manifold.db("Manifold: orient faces aborted.")) (line 318)
makes it work.

thomthom

The groups that it creates, is it suppose to be offset from the original group?

TIG

@thomthom said:

Just noticed, when I reload your script, load 'manifold.rb' it keeps adding more menu items.

Think it's because of the last line: file_loaded(__FILE__)
Should it not be: file_loaded(File.basename(__FILE__)) ?

whopops ! update in the pipeline...
I'll also fix the db() error...

thomthom

@thomthom said:

On a sidenote: you can save some lines in your remove_inner_faces method by using more of Ruby's Enumerator and Array methods:


> def remove_inner_faces()
> 	faces = @gents.select { |e| e.class==Sketchup;;Face }
> 	faces_to_go = faces.select { |face| face.outer_loop.edges.any? { |e| e.faces.length > 2  } }
> 	faces_to_go.each{|e|
> 		if e.valid?
> 			clone_removed_into_error_group([e]+e.edges)
> 			e.erase! if e.valid? 
> 		end#if
> 	}
> end
>

I just noticed them not too long ago while having another look at the Ruby docs, I realised I could cut down a number of lines in most my scripts.

Never mind this code. Seems to have a bug in it.

thomthom

Got a case where the internal faces is removing too much. See attached file. Run the script on the large cube.

manifold tester.skp

TIG

Here's v1.1 with some glitch fixes http://forums.sketchucation.com/viewtopic.php?p=218691#p218691

TIG

@thomthom said:

Got a case where the internal faces is removing too much. See attached file. Run the script on the large cube.

I'll look into it...
EDIT: removes innermost groups of outer-faces [?] AND leaves internal-faces edges behind [that's an easy fix]

driven

fantastic,

go out on a family errand and come back to a whole new playing field, anything I can do to help?
a 'test' skp, if you need something more taxing,
or I'll try repairing it myself when you've got the next one up...
or need a tester... whatever you need...

this slow to hand stitch example of what I'm try to do with 3D printed stainless
about 25% of the poly count I would normally use for this sort of thing, and not triangulated.

john

TIG

driven

I'll look at your problem - TT has already come up with one set of problems to fix !
With yours I get a non-planar points error - since there's only 3 of them it seems a bit strange...
We're really at 'beta' testing now - I only outlined the ideas some hours ago and issued this as my first go - it WILL get better

pilou

Very useful for boats builders

driven

@unknownuser said:

Very useful for boats builders

and don't forget the humble Air Bed makers of the world...

TIG,
I did this simply to save you having to draw-up or look for something relevant to test on

the last 3 letters in watertight might contain none planer points, one had to be over-drawn with a poly-line and two unsoftened with eraser on the bottoms, before I could JPP them, oh the bottom of that A I made a real hash of.. missed it out and went back... I was in a rush...

I made the ring quite well, two joints (triangulated) near you name, I chose a ragged font in an attempt to create tiny voids and was surprised how well it came out. Fredo's Joint PushPull is remarkably clean, I have another test piece on file that is pilfered with bad seams if that's more useful.

john

I'll give anything a spin, it's great that your on the case...

TIG

Here's v1.2 http://forums.sketchucation.com/viewtopic.php?p=218691#p218691
Basic Ticker added. Better processing for inner faces.
Three-faced-edged external-faces now usually kept. [fixed TT's ball-breaker boxy mess ]
FR lingvo updated by Pilou.

Still struggling with driven's monster...

More feedback and ideas please...

driven

@tig said:

Here's v1.2 http://forums.sketchucation.com/viewtopic.php?p=218691#p218691
Still struggling with driven's monster...

More feedback and ideas please... :ugeek:

that's the simple version, so far it's taken 2hrs 14 min and 49seconds just to explode all the groups so I can then re-group to test the plug on it (and it's only 600,000+ poly's)

I just fired up the other computer so I'll do some simple tests on it, while I wait

TIG

@driven said:

@tig said:

Here's v1.2 http://forums.sketchucation.com/viewtopic.php?p=218691#p218691
Still struggling with driven's monster...
More feedback and ideas please...

that's the simple version, so far it's taken 2hrs 14 min and 49seconds just to explode all the groups so I can then re-group to test the plug on it (and it's only 600,000+ poly's)
I just fired up the other computer so I'll do some simple tests on it, while I wait

I've added some more error reporting in the console to my own version so I can at least see what these errors are - seems related almost exclusively now to healing very tiny holes ?
I'm thinking perhaps to move these vertices to heal these tiny gaps rather than fail making edges that are too small inside a 'rescue' ? It would change the model's form, but so slightly you'd never notice...

Watch this space

driven

Did you scale it up even more?

TIG

@driven said:

Did you scale it up even more?

Scaling it up x100 or so might make the tiny gaps 'face' - but I looking at pinching the nearly closed verices together so that the gap goes... without much success it has to be said !

driven

booled shapes, odd repair on torus

works on Mac

no Jade highlighting on second test, this model was coloured, 1st wasn't

hole repair goes from every other vert on torus?

messages

2 then
manifold, orienting faces then
6
no option dialogs, etc...(should there be?)

CadSpan Style shows up no reversed faces after, GOOD

I'll try more

driven

Sorry. shows up when I click on that repair, the first was there from the top, I'm sure....
highlighting is on the underside... EDIT: and it ungrouped separate geometry?

driven

OK, am I following this a bit better now.

I got a Manifold dialog-box on the comp_fish when no repairs were needed and the new group is moved to one-side, [url]/viewtopic.php?f=10&t=25473&p=218811#p218811[/url]

on the other, after the repairs were done, all 3 two manifold bits stayed in place so I get the 6 meaning six manifold selection? and the box points just stay to one-side.