[Plugin] BezierSpline - v2.2a - 22 Apr 21

Edson · 2 Apr 2009, 22:06

Dear Frodo,

...

Kind regards,
Bob

watkins,

i just could not resist pulling your leg about the mix up of fredo6's username with the main character in The Lord of the Rings.

watkins · 3 Apr 2009, 06:09

Dear Edson,

You are not the only one to spot that. I will have to be more careful in future.

Regards,
Bob

mattg · 1 May 2009, 01:56

Just re-downloaded this for SU7.

Any reason why the toolbar won't hug the side of the screen.

Seems to only want to sit horizontally along the top.

fredo6 · 1 May 2009, 09:07

@mattg said:

Just re-downloaded this for SU7.

Any reason why the toolbar won't hug the side of the screen.

Seems to only want to sit horizontally along the top.

Matt,

As you may know, scripts have zero control over the toolbar placement from Ruby.
So it must be SU7 or the configuration of the toolbar set.

In my SU7 environment, I don't have any particular issue.

Fredo

watkins · 1 May 2009, 13:02

Dear Mattg

You should be able to 're-shape' the rectangle of icons by searching for re-sizing arrows at the edges using the mouse pointer. Once re-shaped (horizontal rectangle to vertical rectangle) it can be placed along the side.

Regards,
Bob

mattg · 1 May 2009, 21:19

Thanks Bob, too easy!

jdspdx · 3 Aug 2009, 04:33

Thanks fredo! I have the same condition as smithsam - Quickcard and Tutorials open as blank boxes from Documentation menu. Both are in BZ_Dir_12. --- jdspdx

fredo6 · 3 Aug 2009, 06:43

@jdspdx said:

Thanks fredo! I have the same condition as smithsam - Quickcard and Tutorials open as blank boxes from Documentation menu. Both are in BZ_Dir_12. --- jdspdx

This seems to be related to the Mac platform, dealing with how Adobe PFD reader is installed or configured to ruun in web browser Safari.
I would need other Mac users to advise and possibly gives hints on how to resolve this.

Fredo

Bob James · 5 Aug 2009, 06:53

My two cents worth: I have no problem with any feature of Bezierspline on my Intel iMac.
Also the pdf files located in the BZ_DIR_12 folder open in Adobe Reader 9.

Ayashi · 7 Aug 2009, 08:21

Excellent plugin! Thank you dude!

mitcorb · 31 Aug 2009, 11:56

Thanks, Fredo:
I had a glance at this link and it looks very informative.

fredo6 · 31 Aug 2009, 15:30

I discovered a remarkable tutorial on BezierSpline written by Scott Onstottfrom AECBytes at http://www.aecbytes.com/tipsandtricks/2009/issue42-sketchup.html. It will drive you with a step-by-step tour of the plugin, with all types of curves (much better than what I could do).

Fredo

oblin77 · 13 Sept 2009, 06:34

Hello Fredo06

Where I can find and download your plugin BezierSpline v1.21 ?

thank you

Best regards

olivier de france

solo · 13 Sept 2009, 06:38

Try the first page.

plot-paris · 25 Sept 2009, 08:45

don't know if that behavior is specific to my machinde. but when I have drawn a curve, then go into edit mode, press Ctrl to unlock allow curve points to be moved outside the initial drawing plane and then press the up arrow to lock it to a vertical direction, my cursor doesn't stick to the point anymore. meaning, that when I move up my cursor only by a tiny bit, the curve point shoots up vertically a lot faster, and in very wide increments too.

if that is the general behavior of the plugin, would it be possible to change it, so that the point still sticks to the position of the curser (only the vertical position of course. to make things easier, a dotted horizontal line could be connecting the curve point and the curser).

any ideas if thats possible?

fredo6 · 25 Sept 2009, 14:41

@plot-paris said:

don't know if that behavior is specific to my machinde. but when I have drawn a curve, then go into edit mode, press Ctrl to unlock allow curve points to be moved outside the initial drawing plane and then press the up arrow to lock it to a vertical direction, my cursor doesn't stick to the point anymore. meaning, that when I move up my cursor only by a tiny bit, the curve point shoots up vertically a lot faster, and in very wide increments too.

if that is the general behavior of the plugin, would it be possible to change it, so that the point still sticks to the position of the curser (only the vertical position of course. to make things easier, a dotted horizontal line could be connecting the curve point and the curser).

any ideas if thats possible?

I understand and I had myself questions about this behavior which may not seem very natural. Let's say 2 things about it:

The Vertex Edit mode is actually working for perfroming one move per click. So in your case, you would need to move first in the 3D, then release the mouse, switch to Vertical mode by Arrow and Click to move the point vertically. I agree that I should use the modifier keys as successive steps of Input. I'll probably do that in a further release.
Bezierspline was my very first script and I did not that much of the SU API. My plan would be to introduce stickiness and inferences, a little bit in the spirit of Tools on Surface.

Fredo

plot-paris · 25 Sept 2009, 16:43

@unknownuser said:

My plan would be to introduce stickiness and inferences, a little bit in the spirit of Tools on Surface.

I am really looking forward to this, Fredo.

misteriosodude · 28 Oct 2009, 04:02

Amazing, excellent -- very useful plugin, thanks!

rv1974 · 1 Dec 2009, 14:43

How could I make 'polyline segmentor' command work? I simply can't find it.

Bob James · 1 Dec 2009, 17:59

Right click on the line and then click on "Convert to"