sketchucation logo sketchucation
    • Login
    ℹ️ Licensed Extensions | FredoBatch, ElevationProfile, FredoSketch, LayOps, MatSim and Pic2Shape will require license from Sept 1st More Info

    [Plugin] Shape Bender Beta

    Scheduled Pinned Locked Moved Plugins
    1.3k Posts 331 Posters 1.7m Views 329 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • B Offline
      BTM
      last edited by

      Great!! 2 things: 1, why do a few random lines appear when I use it?
      bend.jpg
      also, sketchup said that there were problems, and when I agreed to let it fix them, this was the message:

      Results of Validity Check.
      
      CLoop (39755) for CFace (39754) has zero area
      Loop 0 of CFace (39754) is an invalid outer loop
      Entity CFace (39754) should be erased - done
      CLoop (39760) for CFace (39759) has zero area
      Loop 0 of CFace (39759) is an invalid outer loop
      Entity CFace (39759) should be erased - done
      CLoop (40274) for CFace (40273) has zero area
      Loop 0 of CFace (40273) is an invalid outer loop
      Entity CFace (40273) should be erased - done
      CLoop (40279) for CFace (40278) has zero area
      Loop 0 of CFace (40278) is an invalid outer loop
      Entity CFace (40278) should be erased - done
      CLoop (43115) for CFace (43114) has zero area
      Loop 0 of CFace (43114) is an invalid outer loop
      Entity CFace (43114) should be erased - done
      CLoop (43500) for CFace (43499) has zero area
      Loop 0 of CFace (43499) is an invalid outer loop
      Entity CFace (43499) should be erased - done
      
      1 Reply Last reply Reply Quote 0
      • Chris FullmerC Offline
        Chris Fullmer
        last edited by

        Hmmm, very interesting.

        Well, the lines appear because a face is being bent in a way that it is not able to do, so SketchUp steps in and adds the extra lines so that it can bend as needed. I'd be interested if anyone out there has a method for determining what faces are going to need that extra geometry so I can add the lines myself beforehand.

        The invalid geometry actually probably has a lot to do with problem above. Invalid geometry can be fixed automatically, the worst that can happen is that it will delete a few bad faces. Ok, thats not really ideal. So hopefully I'll get it fixed πŸ˜„

        On a happier note, I got the script to work with groups and components. I've got a few other things I want to try to implement tonight before I post the update though. So far so good.

        Chris

        Lately you've been tan, suspicious for the winter.
        All my Plugins I've written

        1 Reply Last reply Reply Quote 0
        • B Offline
          BTM
          last edited by

          And up arrow isn't toggling orientation.

          1 Reply Last reply Reply Quote 0
          • Chris FullmerC Offline
            Chris Fullmer
            last edited by

            @unknownuser said:

            And up arrow isn't toggling orientation.

            Really? Thats too bad. If the model is complex, it will take a second or two to "toggle". Its not necessarily immediate. It might need to think about it for a bit.

            So if you've waited patiently and its still not working, that is no good. Could you open the Ruby Console and see if it gives any errors when you press the up arrow key?

            Chris

            Lately you've been tan, suspicious for the winter.
            All my Plugins I've written

            1 Reply Last reply Reply Quote 0
            • jeff hammondJ Offline
              jeff hammond
              last edited by

              just a by-the-way going back to the perpendicular face/mac osx
              the up arrow does work with this script on macs so it's probably something to do with the gear's geometry.

              dotdotdot

              1 Reply Last reply Reply Quote 0
              • B Offline
                BTM
                last edited by

                Actually, I tried it with a simple rectangle as well. It give no errors in the console, nothing happens at all. πŸ˜• With the console opened, I selected the (rectangle) group, then shape bend, then the straight line, then curved. after I selected the curved line, I pressed the up arrow. Nothing happens at all. Am I doing something wrong?

                1 Reply Last reply Reply Quote 0
                • jeff hammondJ Offline
                  jeff hammond
                  last edited by

                  it sounds like you're doing it properly.. that did happen to me once yesterday (didn't get any response from the up arrow and i wasn't getting the green outline showing a preview bend.. (it was after i tried a super complex shape being bent to a weird 3d curve -- i was trying to break the ruby πŸ˜„ and succeeded)
                  i quit sketchup and relaunched and it worked again.
                  try that.

                  dotdotdot

                  1 Reply Last reply Reply Quote 0
                  • Chris FullmerC Offline
                    Chris Fullmer
                    last edited by

                    Hmm, here's the order of operations:

                    Select a group (must be a group, not a component in the current version of the script)
                    Activate the script
                    Select a straight line - must be drawn on the red axis. It will add "start" and "end" tags to it if it was selected correctly.
                    Select the curve. Now the grids should appear and you should be able to press the up arrow.

                    Hope that helps,

                    Chris

                    Jeff, I found a better method for the up arrow key. I still need to implement it in the perpendicular face tools script though - I probably will have time for that tomorrow.

                    Lately you've been tan, suspicious for the winter.
                    All my Plugins I've written

                    1 Reply Last reply Reply Quote 0
                    • Chris FullmerC Offline
                      Chris Fullmer
                      last edited by

                      @unknownuser said:

                      i was trying to break the ruby πŸ˜„ and succeeded)

                      I've tried hard to make it unbreakable.....but it has tried harder to remain breakable πŸ˜„

                      Lately you've been tan, suspicious for the winter.
                      All my Plugins I've written

                      1 Reply Last reply Reply Quote 0
                      • Chris FullmerC Offline
                        Chris Fullmer
                        last edited by

                        UPDATED! v 0.2 Beta

                        A few major improvements. Now you can bend a component or a group. It can be scaled or rotated however you want, no need to explode and re-group immediately before using the plugin anymore. The shape to bend can also be comprised of groups and components. The script will explode them all by necessity though.

                        Also I added dynamic highlighting. Now when you move the mouse over a line or curve that is an acceptable selection, it is highlighted. This should help make it easier to know what is an acceptable line or curve.

                        Hopefully it is more stable now. I've tweaked a few other spots in the code, but nothing major. Just those 2 things listed above. Let me know if I broke anything, or if you like what I fixed.

                        Chris

                        Lately you've been tan, suspicious for the winter.
                        All my Plugins I've written

                        1 Reply Last reply Reply Quote 0
                        • W Offline
                          watkins
                          last edited by

                          Dear Chris,

                          Many thanks for you wonderful new plugin. I should like to thank you for your generosity too. It is greatly appreciated.

                          I assume you meant 10 April and not 10 March.

                          Kind regards,
                          Bob

                          1 Reply Last reply Reply Quote 0
                          • Dave RD Offline
                            Dave R
                            last edited by

                            Chris, I didn't have any trouble with the plugin yesterday when I tried it. When I woke up this morning there was an e-mail froma friend who was trying it. He sent it to me and I'm getting the same weird results. See the screen grab. The group starts out as long has the straight line. I tried it without the swirly thing at the end and get the same results. I've also tried changing the length of the curve but without luck. I discovered that it depends upon which direction the straight line is drawn. If the line is drawn from right to left, the geometry is added as shown. I also notice that if the curve is drawn from right to left the start and end points are transposed compared to the line.

                            Right to left-drawn line:
                            bend tim.jpg

                            Left to right-drawn line, right to left-drawn curve
                            bend tim2.jpg

                            Left to right-drawn line, left to right drawn curve
                            bend tim3.jpg

                            Is there any chance of getting the plugin to ignore the direction of the drawn lines and curves?
                            Edited to add, I tried it with the new version and got the same results.

                            Etaoin Shrdlu

                            %

                            (THERE'S NO PLACE LIKE)

                            G28 X0.0 Y0.0 Z0.0

                            M30

                            %

                            1 Reply Last reply Reply Quote 0
                            • B Offline
                              BTM
                              last edited by

                              Even with the new one, the up arrow NEVER does anything. I've been doing it properly, but nothing happens. Could another script have broken it? Also, I'm now having trouble with the smoothing. When the shape is first created, I have to open it again, because it doesn't appear smooth until I do.
                              weird.jpg

                              1 Reply Last reply Reply Quote 0
                              • D Offline
                                DonVid
                                last edited by

                                Greetings Chris:

                                This is another great plugin that surpasses other 3D modeling program: easy, intuitive and precise. It can give several steps ahead when modeling architectural objects and entities.

                                Thanks a MM.

                                DonVid


                                Component before bending


                                Good and precise output

                                1 Reply Last reply Reply Quote 0
                                • Chris FullmerC Offline
                                  Chris Fullmer
                                  last edited by

                                  oh no!!, the script is indeed not working if you draw the first line from right to left......grrrr! I've got an idea of how to fix it though. Give me an hour or two and I'll get it updated very shortly. Sorry, sorry, sorry. Thanks for pointing it out.

                                  @Bob, yes I meant April - oops! - The date is updated now, thanks!

                                  BTM - sorry about the arrow key. I'm guessing its another script breaking it. Would you mind poking around to see which one it is? I don't even know how another script could, but its "amazing" what other scripts do........ Also, the smoothing thing is an odd bug I agree. I noticed it to, but I couldn't find a fix. I'll look into again today and see if I can get it working better.

                                  Thanks everyone for the quick and detailed feeedback! πŸ˜„

                                  Chris

                                  Lately you've been tan, suspicious for the winter.
                                  All my Plugins I've written

                                  1 Reply Last reply Reply Quote 0
                                  • Dave RD Offline
                                    Dave R
                                    last edited by

                                    Thank you

                                    Etaoin Shrdlu

                                    %

                                    (THERE'S NO PLACE LIKE)

                                    G28 X0.0 Y0.0 Z0.0

                                    M30

                                    %

                                    1 Reply Last reply Reply Quote 0
                                    • Chris FullmerC Offline
                                      Chris Fullmer
                                      last edited by

                                      UPDATED v2.5 beta!

                                      0.25 Beta:: 2009-04-10

                                      • Hit the down arrow key to change the start/end positions of the line. The line needs to have its start point "to the left" of the endpoint... If you notice weird behavior in how the shape is lining up on the curve, try hitting the down arrow key.
                                      • Up arrow key AND Home hey toggle the curve. Downd arrow key AND End toggle the line now for added compatibility (for BTM πŸ˜„

                                      So please tell your friend to re-download the plugin Dave, and try using the down arrow key or End key to toggle the line. Essentially the start point on the line needs to have its x position be less than the end point's x position. Hence, "to the left of" the endpoint. But obviously that just depends on how you orient your view.

                                      BTM, I also added Home and End keys to the toggle. Try those to see if they work,

                                      Thanks!

                                      Chris

                                      I'll still look into the faceting of faeces.

                                      Lately you've been tan, suspicious for the winter.
                                      All my Plugins I've written

                                      1 Reply Last reply Reply Quote 0
                                      • Dave RD Offline
                                        Dave R
                                        last edited by

                                        Thank you Chris. This is great.

                                        Etaoin Shrdlu

                                        %

                                        (THERE'S NO PLACE LIKE)

                                        G28 X0.0 Y0.0 Z0.0

                                        M30

                                        %

                                        1 Reply Last reply Reply Quote 0
                                        • jim smithJ Offline
                                          jim smith
                                          last edited by

                                          Thanks Chris, this is a very welcome plugin and I will find it very useful.

                                          "Out of clutter find simplicity,
                                          from discord find harmony,
                                          In the middle of difficulty lies opportunity"
                                          Albert Einstein

                                          1 Reply Last reply Reply Quote 0
                                          • pilouP Offline
                                            pilou
                                            last edited by

                                            Don't forget that the second curve can be vertical and in fact has any 3D orientations! πŸ˜‰


                                            curv.jpg

                                            Frenchy Pilou
                                            Is beautiful that please without concept!
                                            My Little site :)

                                            1 Reply Last reply Reply Quote 0
                                            • 1
                                            • 2
                                            • 3
                                            • 4
                                            • 5
                                            • 63
                                            • 64
                                            • 3 / 64
                                            • First post
                                              Last post
                                            Buy SketchPlus
                                            Buy SUbD
                                            Buy WrapR
                                            Buy eBook
                                            Buy Modelur
                                            Buy Vertex Tools
                                            Buy SketchCuisine
                                            Buy FormFonts

                                            Advertisement