RpTreeMaker - new version Dec 12, 2008

Al Hart · 29 Dec 2008, 18:58

Rendering with V-Ray or Podium

Are there any V-ray or Podium users out there who could test these components to see if they render properly? I have attached the SKP file. I am also planning a "rectangle" option which will make a rectangular shadow mask - if you want to keep the SketchUp models even smaller.

If you need to make modifications to make it work properly, let me know what they are and/or send me the modified .SKP file so we can try to create the components properly in the first place.

RpTreeMaker Trees with Shadow masks

sorgesu · 29 Dec 2008, 20:32

Lovely. I do have a question though. It isn't readily apparent from the images.
At the low poly count, other solutions have had a tendencay to cut accross bits of the image. that is, it lopped off bits. With a photo it may not matter, but with a drawing, some of the nuance is in the outline and if that is removed, it really takes away from the visual.
Comment?

Al Hart · 29 Dec 2008, 20:53

I'll keep my eye open for that.

It was my intention to not include hexagons which had only 1 or 2 pixels overlap with with the image. But I will change it to include everything. It might make the shadow slightly larger, but should still work ok.

EarthMover · 30 Dec 2008, 09:45

Here's a quick test with Vray. I did have to add alpha mask to the trees in order to get the outline to disappear. It's odd though that the alpha map didn't seem to affect the shadow output. No worries though, as the high poly output shadow is very good as is.

Also, shadows appear the same on all trees within Podium.

Al, have you ever considered adding the ability to import a .png file into the treemaker, solely to utilize the shadow mask algorithm? This would be an indispensable tool for me as the time spent on cutting out shadow masks by hand is very tedious. It would be a handy tool for inserting a billboard and having the tool automatically generate an output with the shadow mask.

Gaieus · 30 Dec 2008, 11:33

@earthmover said:

Also, shadows appear the same on all trees within Podium.

I'd expect that since Podium can handle the transparent channel of the png image so its shadow is even better than that of any of the cutouts.

Nicely rendered trees!

sepo · 30 Dec 2008, 12:49

Gaieus you are correct. .png trees render no problem in Podium

Gaieus · 30 Dec 2008, 12:52

Actually I have found it very useful and handy with a couple of rendering engines that they support alpha channel rather than you'd need to suffer with clip masks (although they are not very hard to make from a nice alpha channels anyway)

sepo · 30 Dec 2008, 12:59

True , clipmaps are easy to make, but when you have a lot of them in SU file it is not as easy to navigate about (of course if those are not .png)

Al Hart · 30 Dec 2008, 15:18

@earthmover said:

Here's a quick test with Vray. I did have to add alpha mask to the trees in order to get the outline to disappear. It's odd though that the alpha map didn't seem to affect the shadow output. No worries though, as the high poly output shadow is very good as is.

Also, shadows appear the same on all trees within Podium.

Al, have you ever considered adding the ability to import a .png file into the treemaker, solely to utilize the shadow mask algorithm? This would be an indispensable tool for me as the time spent on cutting out shadow masks by hand is very tedious. It would be a handy tool for inserting a billboard and having the tool automatically generate an output with the shadow mask.

Do you add the alpha mask to the trees in SketchUp, or as a post process in V-ray.

If you add them in SketchUp, send me a model with a tree with an alpha-mask.

If you add them in V-Ray, send me a sample of the alpha-mask.

Al Hart · 30 Dec 2008, 18:51

@earthmover said:

Here's a quick test with Vray.

I see that you placed the tree in front of a window, but it wasn't reflective.

I forgot about reflections.

Would you put one of the trees in front of a reflective window or mirror to see if we get the reflection properly?

I only put the image on one side of the tree (since they are marked as always face camera). But I may need to put a material on both sides.

EarthMover · 30 Dec 2008, 20:24

Al, Here is the alpha map I used and were I put it. Vray runs from within sketchup, but you add the alpha map in the transparency channel from within vray.

Also, the reflections are not working in Vray.

Hope that helps.

Al Hart · 30 Dec 2008, 21:48

@earthmover said:

Al, Here is the alpha map I used and were I put it. Vray runs from within sketchup, but you add the alpha map in the transparency channel from within vray.

Also, the reflections are not working in Vray.

Hope that helps.

I will try putting the tree image on the back of the tree as well, and we can see if that helps with reflection.

If I make an alpha map, do you want me to store it on the disk somewhere, or in SketchUp somewhere?

EarthMover · 30 Dec 2008, 23:09

I guess it would make the most sense to just output the alpha channel in the same location that the tree image is saved to. Also, there is no naming contingency in Vray, so the saved name could be anything you choose.

Al Hart · 30 Dec 2008, 23:37

@earthmover said:

I guess it would make the most sense to just output the alpha channel in the same location that the tree image is saved to. Also, there is no naming contingency in Vray, so the saved name could be anything you choose.

The tree textures are stored initially on the disk in your temporary folder, however they would be hard to find, and not easy to get to later if you open an older model.

Here is one idea.

a. I add a hidden edge to the tree component which has a material which is the alpha channel map.

b. You can go to SketchUp / Materials / Model and right click on the "dummy" material for the alpha channel

c. After the right click, and click Export Texture image to save the image somewhere and send it to V-ray.

Al Hart · 31 Dec 2008, 05:59

Try this model.

The tree has materials on both sides - so it should work OK in the mirror.

The tree has the alpha clipmask stored on a material on the tree itself (the material with the tree itself white), so you should be able to select the clipmask from the materials window and save the image.

tree with material on both sides and clipmask

EarthMover · 31 Dec 2008, 21:24

Al,

Reflections are working in Vray now. Alpha map also worked fine.

Thanks again

juju · 4 Jan 2009, 21:14

Al, thanks for what seems like an extremely useful app and for free on top of that!

On another note - I've tried downloading the RpTreeMaker a few times already, ZIP arrives corrupt or server is reset. I was wondering if anybody else seem to be having trouble with downloading the app?

Al Hart · 5 Jan 2009, 02:16

Give it another try at: RpTreeMaker HL12tm

I was able to download it OK today.

Perhaps someone else can try.

tomasz · 5 Jan 2009, 10:22

Hi Al,
Thank you for a brilliant tool.
I have rendered the group of trees in Kerkythea.
I had to modify one thing in your model. Image map is applied to Back Face instead of Front.

I have an idea. Al, would it be possible to export full 3D model from your app as well.
What I am thinking of is having a 2D tree in SU and then full 3D model in a rendering application as instanced object! It would be an excellent feature.

I have already implemented it in SU2KT where there is a hidden, high polygon component and a simplified proxy just for SU. Maxwell, Fryrender, Indigo, Kerkythea and other application users would be extremely happy to see it.

Cheers
Tomasz

juju · 5 Jan 2009, 12:44

@al hart said:

Give it another try at: RpTreeMaker HL12tm

I was able to download it OK today.

Perhaps someone else can try.

Hi Al, thanks for the reply. I was finally able to download the app, the transfer went dead a few times but I got it DL'ed and extracted fine. Seems like the trouble must have been on my end seeing that nobody else seem to be having trouble.

Now, to try the app out!