RpTreeMaker - new version Dec 12, 2008

[marne]

Amazing like the previous one, a 1000 thanks. Unbelievable that its for free.

[Al Hart]

@unknownuser said:

Dear Al, thank you for these fine Christmas presents. I am already very pleased about the plugin that moves and mirrors etc. Will save loads of time especially in mirroring. Nice one!

As far as the tree maker is concerned i had a quick look and i liked the graphic presentation. i might be wrong but when i tried to render a file with some of these trees in Podium 1.6 ignored them in rendering. Is this right? Or is it something still to be looked at or does it only appear after a certain time on a long rendering. I presume it will take a lot of working memory this tree maker. Very good though that you are looking at tree presentation within Sketchup. It was always a difficult but important item.
I would love to hear your comment on the rendering and a merry christmas from Spain

Podium users need to edit the tree component, and the select and explode the image inside of the component. This explodes the image into a face, which makes a square shadow in SketchUp, but renders properly in Podium. We are working on a new version which will create the face directly in SketchUp instead of the image, and which will probably create realistic shadows in SketchUp as well.

You might try the Render Plus renderer - IRender nXt - It automatically re-renders the trees as fully fractal trees and gives a much better result. Especially as you zoom in and zoom out on the trees. (RpTreemaker and IRender nXt were both developed by the McNeel/nXt/AccuRender team, so the nXt renderer can automatically re-render the trees.

However, the "image only" trees work well for SketchUp and can be made to work with other renderers like Podium if you use the edit and explode trick.

[Al Hart]

@anssi said:

Al,

The performance boost on my old machine is almost astronomical!

I wonder if a future release could have a control for the vertical viewing angle, as a more "from below" view might be more realistic for trees viewed from near, and a plan view component viewed from straight above would have its uses too.

Cheers,

Anssi

We currently place the camera at 50% of the height of the tree above the ground and look at the middle of the tree. I'll let you set the camera height and we will see if that helps.

[Al Hart]

@al hart said:

We currently place the camera at 50% of the height of the tree above the ground and look at the middle of the tree. I'll let you set the camera height and we will see if that helps.

I added a camera height factor as a percentage of the tree (default 50%) to the advanced settings dialog. It does change the view angle to the tree - see 5% and 150%. (This will be in the next release)

---

[Gaieus]

@al hart said:

We are working on a new version which will create the face directly in SketchUp instead of the image, and which will probably create realistic shadows in SketchUp as well.

Hi Al,

If this also means that you "trace around" the image, please, make it only an option since it can boost poly count considerably. Or even better; an "accuracy" setting would also be cool to create "somewhat" realistic shadows for mid and far distance trees which would be enough.

[Al Hart]

I hope to have time to get this finished soon.

We are using a concept of hexagons, rather than squares to convert the pixels to polylines. This makes a smoother shadow mask with fewer lines.

Since shadows do not need to be too accurate, (and renderers which process alpha-transparent images properly will create shadows directly from the image itself), we think this might work well. I am reacting to a comment Susan S. made that no automated routine can produce shadow masks as well as someone doing it by hand. She is right of course, but I am hoping we can do a better job than you get by tracing around square pixels.

Here is a sample of a RpTreeMaker tree with a "low-poly" hexagonal shadow mask. Actually I have this working for the outside edges, but not for the holes yet. If I don't have time to get the holes to work yet (It's not that hard - just takes some more programming and testing time, perhaps I will release the outside only version.)

In either case, the shadow mask will be an option with an additional option for accuracy of the tracing.

[sorgesu]

Hi Al, this is very interesting. I'm anxious to see the result.
To be more specific as to what I said, or intended to say, is that a computer cannot do as well keeping the dual goals of "low polycount" and "satisfactory" shadow shape in mind. One or the other gets sacrificed with the automated version.

For instance we set ourselves a goal of having no more than 200 segments per tree ( more with flowers or less often repeated entourage) and a convincing shadow. We manage quite nicely but with about 20 minutes of outlining and decision making per tree.

So I am very interested in what your output is going to look like.

[Al Hart]

@sorgesu said:

So I am very interested in what your output is going to look like.

This is showing promise. Here is the same tree with 3 accuracy settings for the shadow masks. (I turned on view hidden geometry so you can see the edge lines which are ordinarily not visible.)

I may increase the accuracy of low just a little - to bring it to about 90 lines, and lower the accuracy of high - to bring it to about 600 lines. (The actual number of lines will depend on the complexity of the tree.)

[Al Hart]

Rendering with V-Ray or Podium

Are there any V-ray or Podium users out there who could test these components to see if they render properly? I have attached the SKP file. I am also planning a "rectangle" option which will make a rectangular shadow mask - if you want to keep the SketchUp models even smaller.

If you need to make modifications to make it work properly, let me know what they are and/or send me the modified .SKP file so we can try to create the components properly in the first place.

---

RpTreeMaker Trees with Shadow masks

[sorgesu]

Lovely. I do have a question though. It isn't readily apparent from the images.
At the low poly count, other solutions have had a tendencay to cut accross bits of the image. that is, it lopped off bits. With a photo it may not matter, but with a drawing, some of the nuance is in the outline and if that is removed, it really takes away from the visual.
Comment?

[Al Hart]

I'll keep my eye open for that.

It was my intention to not include hexagons which had only 1 or 2 pixels overlap with with the image. But I will change it to include everything. It might make the shadow slightly larger, but should still work ok.

[EarthMover]

Here's a quick test with Vray. I did have to add alpha mask to the trees in order to get the outline to disappear. It's odd though that the alpha map didn't seem to affect the shadow output. No worries though, as the high poly output shadow is very good as is.

Also, shadows appear the same on all trees within Podium.

Al, have you ever considered adding the ability to import a .png file into the treemaker, solely to utilize the shadow mask algorithm? This would be an indispensable tool for me as the time spent on cutting out shadow masks by hand is very tedious. It would be a handy tool for inserting a billboard and having the tool automatically generate an output with the shadow mask.

---

---

[Gaieus]

@earthmover said:

Also, shadows appear the same on all trees within Podium.

I'd expect that since Podium can handle the transparent channel of the png image so its shadow is even better than that of any of the cutouts.

Nicely rendered trees!

[sepo]

Gaieus you are correct. .png trees render no problem in Podium

[Gaieus]

Actually I have found it very useful and handy with a couple of rendering engines that they support alpha channel rather than you'd need to suffer with clip masks (although they are not very hard to make from a nice alpha channels anyway)

[sepo]

True , clipmaps are easy to make, but when you have a lot of them in SU file it is not as easy to navigate about (of course if those are not .png)

[Al Hart]

@earthmover said:

Here's a quick test with Vray. I did have to add alpha mask to the trees in order to get the outline to disappear. It's odd though that the alpha map didn't seem to affect the shadow output. No worries though, as the high poly output shadow is very good as is.

Also, shadows appear the same on all trees within Podium.

Al, have you ever considered adding the ability to import a .png file into the treemaker, solely to utilize the shadow mask algorithm? This would be an indispensable tool for me as the time spent on cutting out shadow masks by hand is very tedious. It would be a handy tool for inserting a billboard and having the tool automatically generate an output with the shadow mask.

Do you add the alpha mask to the trees in SketchUp, or as a post process in V-ray.

If you add them in SketchUp, send me a model with a tree with an alpha-mask.

If you add them in V-Ray, send me a sample of the alpha-mask.

[Al Hart]

@earthmover said:

Here's a quick test with Vray.

I see that you placed the tree in front of a window, but it wasn't reflective.

I forgot about reflections.

Would you put one of the trees in front of a reflective window or mirror to see if we get the reflection properly?

I only put the image on one side of the tree (since they are marked as always face camera). But I may need to put a material on both sides.

[EarthMover]

Al, Here is the alpha map I used and were I put it. Vray runs from within sketchup, but you add the alpha map in the transparency channel from within vray.

Also, the reflections are not working in Vray.

Hope that helps.

---

---

---

[Al Hart]

@earthmover said:

Al, Here is the alpha map I used and were I put it. Vray runs from within sketchup, but you add the alpha map in the transparency channel from within vray.

Also, the reflections are not working in Vray.

Hope that helps.

I will try putting the tree image on the back of the tree as well, and we can see if that helps with reflection.

If I make an alpha map, do you want me to store it on the disk somewhere, or in SketchUp somewhere?