Posts made by sarkarshomit

@Anton_S No sir, its still not working with Su2023 on win10.
I so wish if u could give the plugin its much required overhaul.
When i press the fullscreen button check box, it does go in fullscreen, but it does not hide floating and docked toolbars, which i really use a lot for taking screenshots of my works.

So the plugin is still awaiting update for Sketchup 2023?
I use this plugin a lot in Skup2021, but completely migrating to SU23, is not getting possible due to incompatible FS plugin

@fredo6 said:

@sarkarshomit said:

The payment page says perpetual liscence, means one time pay for the plugin, but no details about how we are covered or not in case of updates.

Licensing is independent from the download and upgrade of the extension. so you can upgrade at will. Similarly, it is independent from the version of Sketchup, past and future.

Dear Fredo,
I just purchased the bundle pack, and received the liscences.
Your contribution, just like the other devs, has been phenomenal and I feel blessed for souls like u exist and make things simpler and better.
Thanks a lot,
Starting my use of the paid plugins.

Regards,
Shomit

@jga said:

Given the sophistication of the plugins and constant updating you provide, they are worth it!
Is the payment a "one-off" purchase, or a rolling subscription?

The payment page says perpetual liscence, means one time pay for the plugin, but no details about how we are covered or not in case of updates.

Guess Fredo can clea that detail.

Hi Fredo,
been using your plugins since ages,
I am a single person free lancer, and am in need of a single seat liscence.
went to buy the 8 plugin pack for 40usd, and found it to be good for 3 seats...
Is it possible for you to offer any discount for a single seat requirement for the plugins pack...
Will be of great help...40usd is a bit steep for me at the moment.
Will understand if u do say no.
Any ways, Sketchup is incomplete without Fredo plugins.

Regards..
Shomit
India.

I did send a PM, but seems u have your mail box flooded.

Thank you Fredo....saw the video, as always, you managed to increase the sketchup power yet again.

@dave r said:

@sarkarshomit said:

Can't get it working in sketchup 2018.working fine in skup16, but not in 18...any help if i am doing something wrong!!

Evidently you are doing something wrong. I just installed it in SU2018 and ran it. It works fine. How did you install it? Where did you install it? Do you have Guides set to show in the View menu?
[attachment=0:9qktjmkx]<!-- ia0 -->Screenshot - 5_16_2018 , 5_31_16 AM.png<!-- ia0 -->[/attachment:9qktjmkx]

Thanks for the help.

Strangely in skup16, the plugin shows up in plugins menu named as "set centerpoint".
And in skup18 it shows up in extensions menu as "Add centerpoint".

So finally its working for me. Thanks again.

Can't get it working in sketchup 2018.working fine in skup16, but not in 18...any help if i am doing something wrong!!

@fredo6 said:

New Release: Animator - v1.5d - 13 May 17

Requirement: LibFredo6 v7.5a

This is the same as previous version (v1.5c) with extension of validity beyond 14 May 17.

I am working on a major new release, with Scaling and Along path movements, but it takes more time than expected.

See main post for RBZ files

Waiting and i know it will be the best as always.....thanks for the plugin Fredo......u have been great.
Scaling is something i have been waiting from long time......this expected update will be a great update...

@ntxdave said:

@sarkarshomit said:

i would really love to know about rendering options for animator.
i know its possible using keyframe animation,
but with animator i guess its only that ambient occlusion thingy which i am not that interested.
Would be great with vray or thea render.

In addition to Ambient Occlusion, you can use both Twilight (Pro version only) and Thea.
[attachment=0:2g4uvf8x]<!-- ia0 -->Animator Render.PNG<!-- ia0 -->[/attachment:2g4uvf8x]

Oh wow, i will give it a try soon...thanks

@ntxdave said:

@sarkarshomit said:

Tried my luck with this awesomeness....its a shame had to use keyframe animator for the scaling of the curtains, but rest all is animator magic....thanks fredo.....hoping for a release of the scaling function in animator soon...regards,,
Shomit

I too would really like to have the scaling function.

@solo said:

That was great, normally I get bored after a few seconds, I watched until the end, awesome way the apartment morphs, loved the curtain also.

I agree with you 100%

Can you imagine that animation with one of the rendering engines. I have been playing with the trial version of Enscape and have thought about how it would be to combine Animator with Enscape.

i would really love to know about rendering options for animator.
i know its possible using keyframe animation,
but with animator i guess its only that ambient occlusion thingy which i am not that interested.
Would be great with vray or thea render.

@solo said:

@sarkarshomit said:

https://www.youtube.com/watch?v=enFbLR4cU2k

Tried my luck with this awesomeness....its a shame had to use keyframe animator for the scaling of the curtains, but rest all is animator magic....thanks fredo.....hoping for a release of the scaling function in animator soon...regards,,
Shomit

That was great, normally I get bored after a few seconds, I watched until the end, awesome way the apartment morphs, loved the curtain also.

Thanks for the compliments.....and many thanks to fredo also.

https://www.youtube.com/watch?v=enFbLR4cU2k

Tried my luck with this awesomeness....its a shame had to use keyframe animator for the scaling of the curtains, but rest all is animator magic....thanks fredo.....hoping for a release of the scaling function in animator soon...regards,,
Shomit

Hi Fredo6,
is scaling working in animator?
or am i doing something wrong?
I click on the scaling icon but remaining parameters missing.....please help.

Regards,
SHomit

@anton_s said:

Just tested it on my Windows XP and Windows 10 64bit and it works fine. I really don't know what's wrong with yours. Perhaps you didn't overwrite all the files of AMS library. Try deleting an old version of ams_Lib and ams_Lib.rb from the "C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/" folder. Then install the latest version of AMS Library.

Thanks for the trick, it worked fine...regards....

Yes Anton, updated today the libraries...still this error...

Error Loading File C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings/main.rb
Error: #<NameError: uninitialized constant AMS::Timer>
C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings/main.rb:62:in init' C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings/main.rb:562:in <top (required)>'
C:/Program Files/SketchUp/SketchUp 2016/Tools/extensions.rb:197:in require' C:/Program Files/SketchUp/SketchUp 2016/Tools/extensions.rb:197:in load'
C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings.rb:48:in register_extension' C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings.rb:48:in module:WindowSettings'
C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings.rb:34:in `<top (required)>'

The plugin is crashing with this warning:

Error Loading File C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings/main.rb
Error: #<NameError: uninitialized constant AMS::Timer>
C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings/main.rb:69:in init' C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings/main.rb:572:in <top (required)>'
C:/Program Files/SketchUp/SketchUp 2016/Tools/extensions.rb:197:in require' C:/Program Files/SketchUp/SketchUp 2016/Tools/extensions.rb:197:in load'
C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings.rb:80:in register_extension' C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings.rb:80:in module:WindowSettings'
C:/Users/VD/AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/ams_WindowSettings.rb:62:in `<top (required)>'

I had this working before on my SU16, but now after i updated it is crashing unfortunately

PS: I am on Win7Ult 64bit
Explorer V9

PS PS: I had a backup of the older working version which i copy pasted and now it works, but am scared to update!!!

Please can someone confirm that this works on Skup2016, as i cant seem to find the plugin after install.I have the conic curve in face working, but not the voronoi part...

Will this work with Sketchup 2015 or 2016 version? i remember it worked with earler versions....
I just loved this plugin but nowadays dont seem to get it to work using Su15 or Su16...please any help.

@ssokol said:

Hi , I have problem, Line2Tubes doesn't show up under tools in Sketchup 2014?
In Sketchup 8 works perfect.
Any help?
Thanks

+1 to that...have similar problem...wont show up in SU2014...installed it using Sketchucation Plugin store app...installs through that in plugins folder of SU2014...but wont show up anywhere....please help...very useful...kinda missing it...dont want to go back to SU8...

PS: I Read the whole thread and checked that I dont have any older versions installed.

Till then using TIG's pipe along path