@tig said:

Here's an EEbyRails new V2 example of making a 'flat-topped' sinuous roof barrel, with one end arched and the other angular, in two halves...[attachment=2:3cig0les]<!-- ia2 -->EEbyRailsV2_FlatTop.png<!-- ia2 -->[/attachment:3cig0les]

HI,TIG,This is way more than an improvement ,But it does not get the results I wanted, it seems that these two Profiles control only two rails of the endpoint, I want the result is the same curvature and hope to improve it, above are my small suggestiong on V2 versions thanks again

Thank you ,thomthom
http://forums.sketchucation.com/viewtopic.php?f=323&t=24635

I'm using version 1.1.2, I couldnot see the Select Coplanar Edges

[Request]1:Select all the edges in X ,Y or Z plan
[Request]2:Select triangulateedges

@thomthom said:

I could add Select by Material to my Selection Toys.

[Request] Select triangulate edges

@tig said:

I too have a lathe.rb that is somewhat similar...

希望我的提议对你的插件有用，谢谢！

@tig said:

I don't understand you diagram.
You can already do this ?
Are you wanting some sort of 2-face FollowMe ? Just use the faces edges [welded into a curve] as your Rails ?
With EEbyRv2 [that is about to be launched] you will be able to choose the Profile, Rail1 and Rail2 and then a 'Melding-Profile' that fixes the end form too - is that what you want ? It will allow a definite start and end profile location form to be predefined...

Yes,it could be "2-face +2-path+FollowMe"
I also do not have this plug-in, I use the LATHE. RB command generates images shown, as you said, the first path to the same, choose the second Rails as a control Rails
"lathe" you can see it http://www.sketchupbbs.com/thread-40382-1-1.html

Hi,TIG,I have a idea that <extrude edges by rails> adds a path like this,thanks

next:I wish it could be add rotate and scale function

Hi Chris
I found a problem. LOFT is to implement an order to choose the non-closed line, the feasibility of improving the closed line, I want to click on five closed lines, pop-up dialog box, creating the effect shown in Figure

Hi,TIG,I wish Chris 'Component Stringer'and yous "GROW.RB" combine together

Hi,Chris,I wish your 'Component Stringer'and TIG'S "GROW.RB" combine together

Hi,ken28875,I want 2 face+path give path just like this:

@tig said:

@hsjzyangbin said:

HI,TIG,i wish the picture just like show

You need to experiment with the 'Growth Point' origin in different places ?

Yes,I can do it with 'clf_component_stringer.rb'just like picture

HI,TIG,i wish the picture just like show