Posts made by fredo6

@didier bur said:

Hi all,
When I try to retrieve the name of a material (material.display_name) in a script, I have to translate it first with a LanguageHandler object and the materials.strings local file.
This returns a string, from the prepared $mat_strings I have built with LanguageHandler.
Of course sometimes french materials names have special characters in them: béton, plâtre, etc.
When the script sends such strings to an output file, these characters are NOT converted, for instance the string "Matière 1" is output as "Matière 1".

Didier,

I am unclear of where are the French strings coming from in your exemple. Is it from a file? or from a constant definition?

As Gaieus mentioned, in Ruby, it is careful to put a backslashbefore any character which is not straight ASCII, like many accentuated characters.
So, to define a constant:
Text = "b\éton"
and not
Text = "béton"
Otherwise you may get an error when loading the script (but not always)

This also works from and to the Ruby Console
Now, I don't know what happens when reading and writing from files, as I never tried.
Could you attach your files so that I try

Thanks

Fredo

PS: The only things I noticed concerns the dialog boxes, where you have a different encoding and decoding of the accentuated characters, which makes the == comparison fail. This seems to be due to the fact that Sketchup uses Windows SDK dialog boxes, which have a different encoding method.

Coen

If you scale uniformly a surface, it will never match the original (think of a sphere for instance). However, this is somehow an approximate way to offset its contour, while preserving the overall shape of the surface.

With the first method (only offset the borders), you just use the shape of the outer borders and ignore the ones which are inside. So if you offset by a large distance, you will certainly 'dilute' the shape of the surface.

Both methods have their own benefits and drawbacks, and both can be implemented via a script.

That's what I meant.

Fredo

Oops...!!
Updated with correct code in Ruby repository

Fredo

Urgen,

Very good idea and quite natural in Sketchup.
I updated the files in the script repository (also with non blurry icons).
http://www.sketchucation.com/forums/scf/viewtopic.php?f=153&t=6708&p=42783#p42783

Thanks

Fredo

@jclements said:

"The editor makes full usage of the Sketchup inference mechanism so that you can
visually adjust the distance by reference to a particular point in your model, as in most
Sketchup tools. However, when you drag, you may want to skip some inferences. For
this, just keep the SHIFT key pressed down, while dragging faces."

For me, keeping the SHIFT key depressed doesn't appear to do anything. The black triangle at the cursor seems to be inferencing to other geometry. Perhaps I am misinterpreting its usage?

The black triangle will seem to 'block' on other geometry, but it position will be ignored when you drag the faces. So inference is skipped 'geometrically', but I did not find a way to skip it 'visually'. Hope this answers your question.

On offset tool for curved surfaces:

I am not totally clear on what several of you are targeting. Personally, I see 2 categories of such surface offset tool:

1. Only offsets the external border edges of the surface. This means for instance that all interior faces are left untouched. This does not exist in native Sketchup but can easily be done by a script. Actually the faces are just there to give the overall contour the planes for offsetting and the direction interior / exterior.
   

2. Deform continuously all faces of the model to accommodate the offset of the contour. In such a case, I think it would always change (even slightly) the shape of the overall surface. The best is probably to Scale the surface in all directions, and then move it to the closest position to fit the original surface. This can also easily be automated by a script.
   

Maybe I lack imagination and there are other forms of surface offset someone would think of!?

@unknownuser said:

that's great.. i like the feel much better than the first one.. it's faster and more intuitive for me..

a couple of the tool bar icons are showing up blurry.. any idea why?

I guess you are on Mac.
No idea of what happens with the PNG files, especially because only 2 of them appears in the 'fog'. They all come from the same source (thanks to Daniel S. who designed them). One idea, make sure you got all 5 icons of the latest version (they are all 24 x 24). The two I designed and published in the initial version were 32x32.

@unknownuser said:

Is it possible for this script to explode the curve after it is run? Or at least segment it into parts. It would cut down on a step if you are trying to erase lines for a cleaner face. See image.

I put precisely some code to keep curves on the original surface (to be as less destructive as possible). Note however that the generated corresponding contour is not welded as a curve. Is it the situation you have?

@jim said:

I agree about needing to read or write on the disk in order to accomplish this; however... if you are going to be reading and writing files, why not copy the .skm, load it, and make the adjustments? Either way, it looks as if the best you are going to do is a clunky work-around.

Well, this is to create programmatically a semi-transparent material from an existing material. This is the only way to build a macro that would show part of the model in Xray (as the View mode of Sketchup applies to the whole model). At the moment, I can do it with color of material, but cannot get the textures to be Xray'ed.

See discussion thread in the forum at http://www.sketchucation.com/forums/scf/viewtopic.php?f=57&t=6638
and also in the French section (http://www.sketchucation.com/forums/scf/viewtopic.php?f=51&t=6589&start=0)

---

@daniel s said:

Totally Amazing!!
How can i set for default for Joint, Vector and Normal Push pull in the finishing options "thickening" instead "erase original faces"?? it´s easy with the TAB or F5 keys... but when i restart SketchUp i have to set my defaults again.

Edit the rb file, line 334, and change @option_finishing = 'D' to @option_finishing = 'K'

@daniel s said:

PS. It´s possible to make the plugin work like the SketchUp push/pull? I mean... now you must select at least one face before running the plugin... and after doing the PP you have to select the icon again to PP another face....

This would only work in single-face push pull (but there would be no difference compared to the Sketchup tool). Because you need to be multi-face, you have to select the faces first. Remember that 2 successive JPP may not be equivalent to a single one on the total set of faces!

@al hart said:

Did you call tw.write(entity, fname)

No. My intention is not to export material or even get the JPG file for the texture, but just clone a material within the model, and then change parameters of this new material.

J'ai mis une nouvelle version dans la partie Ruby Discussions
http://www.sketchucation.com/forums/scf/viewtopic.php?f=153&t=6708

Cette version est plus interactive et fournit un feedback visuel de la deformation.

Et il y a un bouton Redo pour Pilou

This is a resurrection of the OLD version of the plugin, published in 2008 and last updated in 2011. It works in all versions of SketchUp and is certified for SU2016 and SU2017. It does NOT require LibFredo6.

Note: There is a new version of JointPushPull, called JointPushPull Interactive Edition 3.0. It includes new extrusion tools and is more interactive.
So you should consider migrating to this new version.
See this post.

Here is the link to the starting post of this new resurrected plugin.

JointPushPull Classic is a script that performs push pull on multiple faces in one operation. Unlike the native Sketchup push-pull tool, JPP Classic can maintain the continuity of the offset surfaces (mode joint push pull). This is useful to thicken non-planar surfaces.
JPP also includes two additional modes: Vector and Normal working with multiple faces.

[attachment=0:3upnsc38]<!-- ia0 -->Tutorial Joint Push Pull Classic - English - v1.1 - 20 Feb 08.pdf<!-- ia0 -->[/attachment:3upnsc38]

• Language: English, French, Spanish (Defisto), Italian (Defisto / COSEDIMARCO)
• Menus: by default, it is installed in Tools > Join Push Pull. There is also a Joint Push Pull menu in the selection contextual menu when one or several faces are selected
• Icon toolbar: Joint Push Pull (5 icons are available)
• The plugin is free, for private and commercial usage.

Although the plugin is obsolete now, this old version is published on the Sketchucation PluginStore under the name JointPushPull Classic.

IMPORTANT: This version can co-exist with the NEW version JointPushPull Interactive.

It is advised to

• install the rbz extension from the Sketchucation PluginStore page for JointPushPull Classic
• or Auto-install JointPushPull Classic with the ExtensionStore plugin distributed by Sketchucation

The footprint in the SU Plugins Directory must be:

• Fredo6_JointPushPullClassic.rb file
• Fredo6_JointPushPullClassic folder

In case you had the old JoinPushPull v2.1 already installed on your computer, it is advised to remove:

• the folder JPP_Dir_21
• the file jointpushpull.rb
• the file LibTraductor.rb

CAUTION: NEVER rename or move files from their folders. If you are unsure of your unzip operation, do it in a neutral folder and check that you reconstruct the right footprint. Then transfer the folders and files to the SU Plugin Directory.

• Select one or several objects (faces, edges, groups or components). Only faces are taken into account.
• Click on the icon of one tool, for instance Joint Push Pull
• Pick a face and gently move the mouse to visualize the offset in wireframe. Keep SHIFT pressed to skip inferencing
• You can type the offset value in the VCB (in model units)
• Type TAB to access options (thickening, continuity parameter, etc…)
• When OK with the parameters, Double-click or press Return to launch the calculation
• The calculation cannot be interrupted. On large models, you may thus get a blank screen for the time the script is computing. Do not panic, just wait, it may take several minutes!

JPP also includes 2 additional buttons:

• Undo - reselect faces (as precisely the original faces could have been erased)
• Redo last Push Pull, allowing executing the last push pull on a new set of faces, with the same parameters.

version 2.2a - 26 Apr 17: same as version 2.1a but certified for all SU version, including SU2017. Published on PluginStore as JointPushPull Classic

version 2.0b - 17 Jul 11: same as version 2.0a but with Italian translation. This version does not work beyond SU13.
Here is the file, just in case

See [url=http:http://forums.sketchucation.com/viewtopic.php?f=323&t=6708&p=342359#p342359]http:http:http:http:http:http:http:http:http:http:http:http:http:http:this illustration[/url].

version 2.0a - 16 Jul 11: refix a bug signaled by Thomthom for some complex shapes (typically with vertices having 5 edges or more). Version 1.9 had some problems left.

version 1.9a - 12 Jul 11: fix a bug signaled by Thomthom for some complex shapes (typically with vertices having 5 edges or more).

version 1.8a - 01 May 11: Better respect of specified distance now working when doing a Joint Push Pull with an imposed plane direction. See discussion in [url=http:http://forums.sketchucation.com/viewtopic.php?f=15&t=36403&view=unread#p325069]http:http:http:http:http:http:http:http:http:http:http:http:http:http:this thread[/url].
Here is the previous version, just in case

version 1.7a - 25 Apr 11: Fix a major bug (causing a freeze of SU in some situations).

version 1.6 - 22 Apr 11: Updated the algorithm to better respect the value of the offset when the surface is composed of sharp angles. THIS VERSION HAD A FREEZE PROBLEM.

version 1.5 - 02 Sep 10: maintenance release for SU8

• Suppress some warning (though harmless) messages in the Ruby console
• JPP now installs itself as an extension of Sketchup (can be disabled / enabled via the Windows > Preferences > Extension dialog
• Spanish translation - Thanks to Defisto

12 Jun 10: stable version, with encapsulation of calculation to skip some known problems on texturing.

---

Tutorial Joint Push Pull - English - v1.1 - 20 Feb 08.pdf

@al hart said:

1. If you examine the .SKM file, you will discover that it is a zip file with the material stored in it. So if you have a way to read the zip file from Ruby, you can access it.

This is good to know, but it would be rather convoluted, especially for the objective I research which is just a script to put the selection in Xray, while the rest of the model is unchanged.

@al hart said:

2. Another way we get the texture is to assign the material to a face or image and use TextureWriter to write the textures to a file. (If it is a "distorted" texture, it will not write the original texture, but rather the texture as it appears on the face.)

I played with the Texturewriter of course, with a Load from a face, but the method filenamedoes not even return anything!

Actually, the question is not really to get the texture, but to create a material as a clone of another one, and then change some parameters(in my case the transparency via the Alpha method). You can do all this with the User Interface of the Sketchup paint bucket, but apparently the Ruby API is far behind.

Thanks for your help.

Is this possible?
I did not find anything in the Ruby doc about how to do that.

What I have found is that:

• You can create a new material by name
• you can only assign a texture to the material by filename (it has to be a JPG)
• However, with SU v6, the JPG is not available as a file but embedded is the SKM file of the material

Thanks

Fredo

Wireframe is even simpler, as you just hide / show the faces

The big problem for Xray, is that I don't find any way to create a material from an existing one, or to assign the new one the same texture as the old one, especially with SU v6, as the JPG are now embedded in SKM files. So the macro works without texture at the moment.

Does anyone see a solution?

J'ai simplement oublié d'attacher l'icone

---

@unknownuser said:

tu parles d'un "X" coloré? où c'est qu'il est celui-là

C'est un bouton dans la toolbar (verifie que cette toolbar est bien affichee).

@unknownuser said:

Les textures disparaissent complètement? C'est normal parce que le % est trop grand ou par ce que n'est pas géré par le script?

Petit probleme dans Ruby. Pas moyen d'avoir le path complet de la texture. Il y a un bug dans l'API.

@unknownuser said:

Ps Pas moyen d'avoir un % réglable?

Ca c'est plus facile. J'avais choisi 0.25, mais il me semble que 0.35 est plus fidele a un Xray.

I quickly built a script to toggle Xray on a part of the model and posted it in the French section of the forum (at http://www.sketchucation.com/forums/scf/viewtopic.php?f=51&t=6589&st=0&sk=t&sd=a&start=30

As Todd says, it will double the number of materials, as you have to duplicate materials present on original faces with an alpha transparency set to 0.25. So "purge unused" should be done at some point. It may also take some time on large models.

The script works on a selection of groups, components or isolated faces, possibly nested.

It will Xray the selection. Then, if you do not select anything, it will work in Toggle mode (Xray / Normal / Xray / Normal, ...)

---

XraySelection.rb

Claire,

On peut simuler le Xray par un petit script qui fonctionne comme suit:

1. Tu selectionnes la partie du modele que tu veux rendre en XRAY. Ce peut etre un ou plusieurs composants ou groupes, meme emboités ou des faces isolées.

2. Tu appelles la commande Xray selection(ou cliques sur le 'joli' icone en forme de X coloré). Cela transforme la selection en Xray

3. A partir de la, la commande marche en mode bascule si tu ne fais aucune selection (et a condition de ne pas effacer ou rajouter des faces dans la partie concernée du modele).

• Donc si tu recliques, la partie en Xray revient en mode normal
• Si tu cliques de nouveau, elle passe en Xray

4. Si tu refais une sélection, tu te retrouves en fait a l'étape 1

Le script est attaché.

Remarque: en Ruby, il faut creer des nouveaux materiels (en mode Xray). Donc n'oublie pas de faire un "purge usused" de temps en temps (tous les materiels creés se termine par "___XR". De meme, si tu as fait des positionnements fins de texture, tu ne les retrouveras pas (je peux se faire en Ruby toutefois, mais c'est un peu plus long).

Voila. Bon courage et dis moi si c'est utile.

Fredo

---

A mettre dans le dossier "plugins"