Fredo Plugins not functioning anymore

Rich O Brien · 18 Feb 2025, 14:21

Please run the Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support menu command in SketchUp and copy/paste the output into your reply.

I would imagine you are running outdated extensions.

You need:

Sketchucation Tools 4.4.1: https://sketchucation.com/plugin/696-sketchucationtools
Libfredo 15:https://sketchucation.com/pluginstore?pln=LibFredo6

If you launch Sketchucation Tools in SketchUp you can update extensions

boulzomaster · 18 Feb 2025, 14:28

Fredo6 Plugins Information on 2025-02-18 15:27:34 +0100

Platform: x64-mswin64_140 - Ruby: 2.7.7
Sketchup: 23.1.340
LibFredo6: v15.0a
LibFredo6 Binary loaded
Sketchucation ExtensionStore: 4.4.1
SCFLicense: v6.4a - 74
Fredo6 Plugins

JointPushPull v4.8a - licensed FULL
SCFLicense directory present

Signature File: 2023-04-08 14:51:38 +0200
Curviloft: 2023-06-23 17:12:35 +0200
FredoScale: 2023-10-03 14:39:18 +0200
FredoSpline: 2024-07-04 09:43:15 +0200
JointPushPull: 2024-09-30 10:57:22 +0200

boulzomaster · 18 Feb 2025, 14:30

Fredo6 Plugins Information on 2025-02-18 15:30:23 +0100

Platform: x64-mswin64_140 - Ruby: 2.7.7
Sketchup: 23.1.340
LibFredo6: v15.0a
LibFredo6 Binary loaded
Sketchucation ExtensionStore: 4.4.1
SCFLicense: v6.4a - 74
Fredo6 Plugins

JointPushPull v4.8a - licensed FULL
SCFLicense directory present

Signature File: 2023-04-08 14:51:38 +0200
Curviloft: 2023-06-23 17:12:35 +0200
FredoScale: 2023-10-03 14:39:18 +0200
FredoSpline: 2024-07-04 09:43:15 +0200
JointPushPull: 2024-09-30 10:57:22 +0200

Rich O Brien · 18 Feb 2025, 14:35

That shows only JPP is installed and licensed.

The rest looks ok. If you install the other Fredo extensions and open the Ruby Console are there errors?

If you open SketchUp then go to Extensions > Developer > Ruby Console it will open the console. Now close SketchUp and start it again so there if there are any startup errors they will show up.

Keep the console open and install other Fredo extensions etc. See if you get any errors.

But from your shared text it is only JJP that is installed.

boulzomaster · 18 Feb 2025, 14:47

Extension returned wrong type for method mark_as_uninstalled

=> That's what is typed in the console when I uninstall the plugins

Nothing is written in the console when I install a plugin

When I sent the console logs, I had only install JPP thinking if I solve the issue for this one, it will solve it for all of them. Here is the console log with all my Fredo plugins installed :

Fredo6 Plugins Information on 2025-02-18 15:47:08 +0100

Platform: x64-mswin64_140 - Ruby: 2.7.7
Sketchup: 23.1.340
LibFredo6: v15.0a
LibFredo6 Binary loaded
Sketchucation ExtensionStore: 4.4.1
SCFLicense: v6.4a - 74
Fredo6 Plugins

Curviloft v2.0a - licensed FULL
FredoScale v3.6a - licensed FULL
FredoSpline v2.6a - licensed FULL
JointPushPull v4.8a - licensed FULL
MoveAlignMe v1.4a
SCFLicense directory present

Signature File: 2023-04-08 14:51:38 +0200
Curviloft: 2023-06-23 17:12:35 +0200
FredoScale: 2023-10-03 14:39:18 +0200
FredoSpline: 2024-07-04 09:43:15 +0200
JointPushPull: 2024-09-30 10:57:22 +0200

boulzomaster · 18 Feb 2025, 14:56

This is what appears in the console log when I click on a plugin button :

Error:
#<Errno::EACCES: Permission denied @ rb_sysopen - C:/Users/greg_/AppData/Local/LIBFREDO6_DATA_Dir/LibFredo6_all_defaults.dat>
c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:167:in initialize' c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:167:in open'
c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:167:in write_to_file' c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:150:in store'
c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1474:in usage_use' c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1462:in command_invoke'
c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1443:in block (2 levels) in build_config_commands' c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1489:in block in add_command'

boulzomaster · 18 Feb 2025, 15:12

Tried to reinstall sketchup and launch it as an admin. Doesn't seem to help, I still get the same "permission denied"...

Anybody, any idea ?

TIG · 18 Feb 2025, 15:34

You don't need to reinstall SketchUp.
Just Repair it.
Close SketchUp.
Right-click on the SketchUp installer's exe file's icon [in Downloads] > Run as administrator... choose Repair.
Do not 'run' SketchUp as administrator, it can cause permission issues.
Your normal user-account might have some 'admin-powers' but that's not the same thing...
Do not Run the installer by double-clicking it - that can cause unpredictable permissions issues.
As far as the:
C:/Users/greg_/AppData/Local/LIBFREDO6_DATA_Dir/LibFredo6_all_defaults.dat
issue is concerned, I'd delete that dat file [or move it out of the way in case of a mess-up in the next step, so you can back-step to where you were].
Alternatively right-click on the dat file's icon and use Security > Permissions > Edit to give FULL control to everything that is listed...
When SketchUp restarts it should be remade with default settings and permissions...

boulzomaster · 18 Feb 2025, 15:38

Thank you, TIG I just deleted the LIBFREDO6_DATA directory and it solved my issue !
Every thing seems to be working fine again

TIG · 18 Feb 2025, 15:41

I didn't actually tell you to delete the whole directory !
Just the dat file.
But probably no harm done