Hello !
I have been using Fredo plugins for some time now, with their license activated, and they saved me quite a lot of trouble in my work !
The thing is, they just stopped functioning on my sketchup at some point and I can't figure out the reason why...! I can see the buttons of the different plugins but when I click on them, nothing happens..
I tried desinstalling completely the software and reinstalling it, same with all the plugins, with no success... The installation goes well, the buttons appears but when I click on them, nothing ! It's driving me crazy !!
The only thing that I had done before it stopped functioning was to install an other plugin, BLB bois, in order to help me layout some plans.. Could there be an issue between these plugins ?

Could anybody help me with this issue ??
Thank you in advance for your time.

Fredo6 Plugins Information on 2025-02-18 15:30:23 +0100

• Platform: x64-mswin64_140 - Ruby: 2.7.7
• Sketchup: 23.1.340
• LibFredo6: v15.0a
• LibFredo6 Binary loaded
• Sketchucation ExtensionStore: 4.4.1
• SCFLicense: v6.4a - 74
• Fredo6 Plugins

  JointPushPull v4.8a - licensed FULL

• SCFLicense directory present

  Signature File: 2023-04-08 14:51:38 +0200
  Curviloft: 2023-06-23 17:12:35 +0200
  FredoScale: 2023-10-03 14:39:18 +0200
  FredoSpline: 2024-07-04 09:43:15 +0200
  JointPushPull: 2024-09-30 10:57:22 +0200

Extension returned wrong type for method mark_as_uninstalled

=> That's what is typed in the console when I uninstall the plugins

Nothing is written in the console when I install a plugin

When I sent the console logs, I had only install JPP thinking if I solve the issue for this one, it will solve it for all of them. Here is the console log with all my Fredo plugins installed :

Fredo6 Plugins Information on 2025-02-18 15:47:08 +0100

• Platform: x64-mswin64_140 - Ruby: 2.7.7
• Sketchup: 23.1.340
• LibFredo6: v15.0a
• LibFredo6 Binary loaded
• Sketchucation ExtensionStore: 4.4.1
• SCFLicense: v6.4a - 74
• Fredo6 Plugins

  Curviloft v2.0a - licensed FULL
  FredoScale v3.6a - licensed FULL
  FredoSpline v2.6a - licensed FULL
  JointPushPull v4.8a - licensed FULL
  MoveAlignMe v1.4a

• SCFLicense directory present

  Signature File: 2023-04-08 14:51:38 +0200
  Curviloft: 2023-06-23 17:12:35 +0200
  FredoScale: 2023-10-03 14:39:18 +0200
  FredoSpline: 2024-07-04 09:43:15 +0200
  JointPushPull: 2024-09-30 10:57:22 +0200

Thank you, TIG I just deleted the LIBFREDO6_DATA directory and it solved my issue !
Every thing seems to be working fine again

Tried to reinstall sketchup and launch it as an admin. Doesn't seem to help, I still get the same "permission denied"...

Anybody, any idea ?

This is what appears in the console log when I click on a plugin button :

Error:
#<Errno::EACCES: Permission denied @ rb_sysopen - C:/Users/greg_/AppData/Local/LIBFREDO6_DATA_Dir/LibFredo6_all_defaults.dat>
c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:167:in initialize' c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:167:in open'
c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:167:in write_to_file' c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6registry.rbe:150:in store'
c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1474:in usage_use' c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1462:in command_invoke'
c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1443:in block (2 levels) in build_config_commands' c:/users/greg_/appdata/roaming/sketchup/sketchup 2023/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1489:in block in add_command'

Extension returned wrong type for method mark_as_uninstalled

=> That's what is typed in the console when I uninstall the plugins

Nothing is written in the console when I install a plugin

When I sent the console logs, I had only install JPP thinking if I solve the issue for this one, it will solve it for all of them. Here is the console log with all my Fredo plugins installed :

Fredo6 Plugins Information on 2025-02-18 15:47:08 +0100

• Platform: x64-mswin64_140 - Ruby: 2.7.7
• Sketchup: 23.1.340
• LibFredo6: v15.0a
• LibFredo6 Binary loaded
• Sketchucation ExtensionStore: 4.4.1
• SCFLicense: v6.4a - 74
• Fredo6 Plugins

  Curviloft v2.0a - licensed FULL
  FredoScale v3.6a - licensed FULL
  FredoSpline v2.6a - licensed FULL
  JointPushPull v4.8a - licensed FULL
  MoveAlignMe v1.4a

• SCFLicense directory present

  Signature File: 2023-04-08 14:51:38 +0200
  Curviloft: 2023-06-23 17:12:35 +0200
  FredoScale: 2023-10-03 14:39:18 +0200
  FredoSpline: 2024-07-04 09:43:15 +0200
  JointPushPull: 2024-09-30 10:57:22 +0200

Fredo6 Plugins Information on 2025-02-18 15:30:23 +0100

• Platform: x64-mswin64_140 - Ruby: 2.7.7
• Sketchup: 23.1.340
• LibFredo6: v15.0a
• LibFredo6 Binary loaded
• Sketchucation ExtensionStore: 4.4.1
• SCFLicense: v6.4a - 74
• Fredo6 Plugins

  JointPushPull v4.8a - licensed FULL

• SCFLicense directory present

  Signature File: 2023-04-08 14:51:38 +0200
  Curviloft: 2023-06-23 17:12:35 +0200
  FredoScale: 2023-10-03 14:39:18 +0200
  FredoSpline: 2024-07-04 09:43:15 +0200
  JointPushPull: 2024-09-30 10:57:22 +0200

Fredo6 Plugins Information on 2025-02-18 15:27:34 +0100

• Platform: x64-mswin64_140 - Ruby: 2.7.7
• Sketchup: 23.1.340
• LibFredo6: v15.0a
• LibFredo6 Binary loaded
• Sketchucation ExtensionStore: 4.4.1
• SCFLicense: v6.4a - 74
• Fredo6 Plugins

  JointPushPull v4.8a - licensed FULL

• SCFLicense directory present

  Signature File: 2023-04-08 14:51:38 +0200
  Curviloft: 2023-06-23 17:12:35 +0200
  FredoScale: 2023-10-03 14:39:18 +0200
  FredoSpline: 2024-07-04 09:43:15 +0200
  JointPushPull: 2024-09-30 10:57:22 +0200

Hello !
I have been using Fredo plugins for some time now, with their license activated, and they saved me quite a lot of trouble in my work !
The thing is, they just stopped functioning on my sketchup at some point and I can't figure out the reason why...! I can see the buttons of the different plugins but when I click on them, nothing happens..
I tried desinstalling completely the software and reinstalling it, same with all the plugins, with no success... The installation goes well, the buttons appears but when I click on them, nothing ! It's driving me crazy !!
The only thing that I had done before it stopped functioning was to install an other plugin, BLB bois, in order to help me layout some plans.. Could there be an issue between these plugins ?

Could anybody help me with this issue ??
Thank you in advance for your time.