Medeek Floor

gullfo

what if i want them staggered the other way? LOL J.K. nicely done!

medeek

First look at skewed hangers with staggered joists:

A little bit more complicated than regular joists due to the offsets but overall its pretty much the same routine. Pretty excited that I actually can get this to work, at first I wasn't really sure if it was even feasible.

medeek

Version 0.9.9 - 10.01.2024

Further updated the insulation, blocking, metal bridging and hanger modules to accommodate staggered joists.
Added skewed hanger options into the Floor tab of the Global Settings.
Added skewed hangers to the Draw and Edit menus.
Added the following skewed (45 degree) Simpson hangers into the built-in library: SUL24, SUL26, SUL210, SUL214, SUL1819, SUL18111, SUL18114, SUL2069, SUL20611, SUL20614, SUR24, SUR26, SUR210, SUR214, SUR1819, SUR18111, SUR18114, SUR2069, SUR20611, SUR20614
Updated and added a new subtraction mode to the SUBTRACT feature: SUBTRACT_JOIST
Added Subtractive Geometry (Joist) in the General tab of the Global Settings.

medeek

Version 0.9.9b - 10.01.2024

Updated the Floor tab of the Global Settings with additional parameters for joist construction.
Fixed a minor bug with the hanger module for double ply staggered studs.
Fixed a bug in the Draw and Edit menus so that all hangers in the library are properly displayed.
Added the following skewed (45 degree) Simpson hangers into the built-in library (skew_hangers): SUL410, SUL414, SUL214_2, SUL210_2, SUL26_2, SUR410, SUR414, SUR214_2, SUR210_2, SUR26_2

medeek

Version 0.9.9c - 10.03.2024

Enabled diagonal deck boards with the addition of a Board rotation parameter.
Enabled 2-Ply rim joists with our without an air gap.

medeek

Version 0.9.9d - 10.03.2024

Fixed critical bugs with saving of floor presets.
Improved robustness of floor attribute library and data lookup methods.

Some incremental improvements but necessary.

IMPORTANT
Note that the last few updates prior to this update introduced a number of new features that effectively disabled the saving of floor presets. Please download this latest update to restore the ability to save floor presets.

medeek

Double rim joists with air gap, lapped and extended:

A quick test of the non-orthogonal floor types shows that the algorithm holds up as it should:

medeek

Version 0.9.9e - 10.04.2024

Updated 2-Ply rim joists with air gap to extend joists that are in a lapped configuration.
Updated the Floor tab of the Global Settings with even more parameters for joist construction.
Added the following face mount Simpson hangers into the built-in library: MIU1819, MIU18111, MIU18114, MIU18116, MIU18118.

medeek

Tutorial #4: Deck Boards (6:42 min.)

https://youtu.be/6AyBgdgE_Cs

medeek

Tutorial 5 - Rim Joists and Sill Plates (5:47 min.)

https://youtu.be/-ugcGFg0-Do

medeek

Tutorial 6 - Skewed Joist Hangers (5:03 min.)

https://youtu.be/C6Jk1dmS4aw

medeek

Tutorial 7 - Subtractive Geometry (10:57 min.)

https://youtu.be/uuPidnI9dYQ

medeek

Tutorial 8 - Staggered Joists (5:06 min.)

https://youtu.be/JOZoxLcgNoc

medeek

One additional parameter for removing specific rim boards:

medeek

I am currently working on the floor covering tool which will then become the code template for the floor opening tool. Once I have those two big items completed I think we will finally have a mostly usable plugin.

I am sure there will be requests for additional features and/or changes to the functionality but the core of the plugin will be mostly in place. At that point I will test the plugin in as many states as possible and attempt to discover any final bugs or issues, then within a couple days I will probably release Version 1.0.0.

Further integration with the estimating module will also be something on the todo list in the weeks ahead.

As always please feel free to chime in with any specific requests or items you feel need to be addressed. I take all feedback and suggestions very seriously and I take everything under consideration. Ultimately I will weigh every idea in the balance and based on its relevancy and time considerations your ideas may quickly become a reality within this plugin or any other plugin in the Medeek family.

medeek

Is 8,000 sqft too large? I'm going to say yes, at least for most people.

Besides the regular mdkBIM plugins I also used the grid tool (Medeek Project), but the regular SketchUp grid tool works just as well. A grid tool is a requirement in my opinion, you really need something like this for laying things out correctly.

I also used TIG's mirror tool for certain manual modeling tasks.

The trim and extend tools in the Medeek Project were also very handy for creating my diagonal braces.

medeek

My wife said my design was boring so I saved a new version and let her try to come up with something a little more interesting…

Rich O Brien

@medeek Its a hotel!

medeek

@Rich-O-Brien

That's what my daughter said it looks like or a very serious bed and breakfast or even a small ski lodge.

medeek

Just a few more screenshots showing how I am stacking posts and beams to ensure a valid load path to the foundation: