[Plugin][$] FredoCorner - v2.7a - 31 Mar 24

fredo6

@dell oglio said:

The fredo corner give me an error when i try to use the chop corner on every corner...How I can Resolve? thanks

First, can you update your profile, at least concerning the SketchUp version you do use (SketchUp 2014 is shown currently, but FredoCorner only runs on SketchUp 2016 and above).

Second, you do not seem to use the latest version of FredoCorner. Can you download it and check if you still have the problem.

yanrothwell

I've used the old Round Corner for years and now am using this plugin... Thanks so much for it and all your plugins Fredo

MY corners are inverted and I can't make them as 'normal' round corners. It's not the reversed faces, and clicking invert doesn't do anything... Any idea?

Merci in advance

Ian

fredo6

@yanrothwell said:

MY corners are inverted and I can't make them as 'normal' round corners. It's not the reversed faces, and clicking invert doesn't do anything... Any idea?

Could you show or post the model please.

Fredo

amsalari

WOW, Thanks For nice and very well work

fredo6

NEW RELEASE: FredoCorner v1.6b - 18 Apr 19

Requirement: LibFredo6 8.8a

FredoCorner 1.6b fixes bugs and extend validity.

Please note that, in the current version of FredoCorner:

there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
Terminal corners (that is ending on a single edge) may present issues and bugs
No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.

noldo

Hi Fredo, the plug-in fail with this geometry type.
Roundcorner work correctly.

Untitled.skp

fredo6

@noldo said:

Hi Fredo, the plug-in fail with this geometry type.
Roundcorner work correctly.

It looks like there is a problem in the model.

One of the face is actually spreading over 3 blocks

Multi faces Corner.png

This creates an issue with FredoCorner, as you can imagine.

Noldo - Corner - Untitled.skp

I'll try to detect this type of configuration in a next version.

Fredo

noldo

@fredo6 said:

@noldo said:

Hi Fredo, the plug-in fail with this geometry type.
Roundcorner work correctly.

It looks like there is a problem in the model.

One of the face is actually spreading over 3 blocks

[attachment=1:3klx88xg]Multi faces Corner.png[/attachment:3klx88xg]

This creates an issue with FredoCorner, as you can imagine.

[attachment=0:3klx88xg]Noldo - Corner - Untitled.skp[/attachment:3klx88xg]

I'll try to detect this type of configuration in a next version.

Fredo

Thank's for your work Fredo!

cskovago

Hi,

I have just updated to the latest version, because the plugin refused to work as the 1.6 version. Now, it is NON-WORKING order, I can not even copy the bug report (because the cursor turns semi-transparent on the bug-report tab), I can select the faces, edges, I can set the parameters, the plugin calculates the edges, but when I let it done the task, nothing happens, just the bug-report tab is red...

Any idea or help, please?

Win7, SketchUp 2017 latest

fredo6

@cskovago said:

Hi,

I have just updated to the latest version, because the plugin refused to work as the 1.6 version. Now, it is NON-WORKING order, I can not even copy the bug report (because the cursor turns semi-transparent on the bug-report tab), I can select the faces, edges, I can set the parameters, the plugin calculates the edges, but when I let it done the task, nothing happens, just the bug-report tab is red...

Any idea or help, please?

Win7, SketchUp 2017 latest

In this kind of situation, it would be helpful to attach the model. Otherwise, this is difficult to find out.

If you have the red notification, then there is an error. So, open the Ruby console before launching FredoCorner and check if there are errors displayed. That would also help.

ronagoldberg

Thank you so much for this plugin and the previous version.
I was using it today and got this odd geometry, it only happened on this side, the other side of this box laid out correctly. I realize it would run into the hole in the geometry but I was surprised at what it was doing and that it wasn't doing the same thing on both sides.

Ron

FredoCorner Issue.jpg

fredo6

@ronagoldberg said:

I was using it today and got this odd geometry, it only happened on this side, the other side of this box laid out correctly. I realize it would run into the hole in the geometry but I was surprised at what it was doing and that it wasn't doing the same thing on both sides.

Strange! Could you post the model so that I have a close look.

Fredo

fredo6

NEW RELEASE: FredoCorner v1.6c - 20 Jun 19

Requirement: LibFredo6 8.8a

FredoCorner 1.6c extends validity.

Please note that, in the current version of FredoCorner:

there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
Terminal corners (that is ending on a single edge) may present issues and bugs
No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.

MWH

Hi, Fredo corner stopped working. It says "no good edges at face"or "NO match of edge properties) even with a new drawing and a simple box.
I have reinstalled Fredo Corner v 1.6c and LibFredo6 ver 9.0A and have rebooted my computer. Still same problem.
I´m using Sketchup 8 Pro on Mac OSX Mojave (10.14.5).
Any tips?

Mattias

Dave R

@mwh said:

I´m using Sketchup 8 Pro on Mac OSX Mojave (10.14.5).

Your profile indicates you are using SketchUp 2018. Which one is correct?

fredo6

@mwh said:

Hi, Fredo corner stopped working. It says "no good edges at face"or "NO match of edge properties) even with a new drawing and a simple box.
I have reinstalled Fredo Corner v 1.6c and LibFredo6 ver 9.0A and have rebooted my computer. Still same problem.

This may simply be normal. You have a filter to select edges

FredoCorner Filter edges.png

Depending on the filter and what you select, FredoCorner may find that there is no effective edges.

So make sure that the edges you select and the filter do match.

Fredo

MWH

Thanks Fredo:)
It was that simple. Unbelievable that I missed that.
Dave R, you're right. I'm using 2018.

Thanks again!
M

deaneau

Hi Fredo Round Corner have some errors

this is a corner with 8 segments and 1mm radius

skp 2019
https://1drv.ms/u/s!AoU3tpJxqmvto3skG47ckoAVXMeP?e=nu42nx

skp2013
https://1drv.ms/u/s!AoU3tpJxqmvto3z6vD80Gvsyv0Vc?e=eIjFlT

Frederik

Looking at the various errors you've posted recently, I assume that it's more a limitation of SU rather than a bug in the various plugins...

What usually helps is if you scale the model up - i.e. 10 times so one millimetre becomes one centimetre...
And once the plugins have made the job for you, you scale it down to the original size...

The detail you seem to want to accomplish is not something SU is good at...

Pixero

I usually make it a component then copy the component and scale it up 10-1000 times and make the tiny stuff on that copy. When done I just delete the copy and the original component is done.