SubD examples and models
-
...that´s fantastic! - please, could you give us (me) any impression with which base (raw) geometry you start to rebuild such a complex shape?
-
This one was simple because I didn't really started it from scratch, I just retouched the model garydorn shared in his topic, http://sketchucation.com/forums/viewtopic.php?f=333%26amp;t=64251 .
As (almost) always, I start with wheel arches(12 segments circle), then hood and top and easily connect these. In an hour you have a body. -
That is excellent!
-
@ely862me said:
This one was simple because I didn't really started it from scratch, I just retouched the model garydorn shared in his topic, http://sketchucation.com/forums/viewtopic.php?f=333%26amp;t=64251 .
As (almost) always, I start with wheel arches(12 segments circle), then hood and top and easily connect these. In an hour you have a body.an hour!
shite, I've worked on this for atleast 12 hrs -
this recent article by Rayn or Andy pretty much says where I am at - "embrassing the Suck
"Some people just seem to be born lucky.
They have the skill, the strength, and the ability to do with all, apparently without working too hard. The rest of us start at zero, and learning to do anything very well means spending a lot of time being mediocre."
full article herethanks for uploading the file - gives me something to study
-
-
It happens every time!
You're quietly working away on simple things,you make a simple bowl, then a stick and a strange little blob.....
then someone goes and lets minions into the thread and it all goes to hell.
I blame that Hornie Ox up there.
-
Lovely render, Box !
@garydorn said:
an hour!
shite, I've worked on this for atleast 12 hrs -
I have about 10 years of working with Sketchup(yet I am far from some people around here) and I first started with modifying the cars I found on the Warehouse. My first car was quite lame but slowly you make progress.
A body shape can be achieved fast but getting it to the right/perfect flow takes more than 12 hours. -
@hornoxx said:
Character Modeling would be somewhat exaggerated in this Minion case
... but at least I managed to make any (stupid) face expression
Each part is made with SubDThat! Is! Awesome! (And I love minions as well!!)
-
@baz said:
@unknownuser said:
an hour!
shite, I've worked on this for atleast 12 hrs -I hear you brother
I've worked on and off with that Charger model for ... two years now. My problem is that I keep getting distracted by the urge to improve or write new tools to "optimize" my workflow. In the end I code more than I model.
-
@box said:
then someone goes and lets minions into the thread and it all goes to hell.
Just waiting for the minion to become SketchUp's "teapot".Nice render by the way. But what is the glass pebbles for?
-
@thomthom said:
But what is the glass pebbles for?
The meandering theory of the model was a Chopstick trainer.
You have a bowl of slippery little suckers to pick up and move. Many people learn to use chopsticks by moving dried peas from one bowl to another. It's one of those save face skills that you need to know if you are in that sort of industry. I happily eat peanuts with chopsticks without thinking these days.
However the slippery little yellow fella distracted me.
I rendered the bowl, chopsticks and blobs and it all looked very elegant, or should I say too neat to be interesting. As you can see from the proxy's the modelling was done while eating a sandwich so Hornoxx's outstanding work helped to bring my little bit to life.And just to finish off, everything about that render is QFT, VT or SubD. The clean lines of the colours are because I could easily select the loops and paint them. Even a tiny line of copper just to highlight the band of red that nobody would actually notice, but makes a significant difference to the final image. The shape of the blobs, the square to round of the chopsticks............
-
-
@pilou said:
That is excellent!
@box said:
I blame that Hornie Ox up there.
@thomthom said:
Just waiting for the minion to become SketchUp's "teapot".
...
@aarondietzen said:
...
Thanks, to all of you posting SubD-stuff & knowledge here in Cotty´s great thread
@Box - on your Manifold model, somewhere up there, I have broken my teeth !!! -
It's not my topic, it's a great community topic...
-
btw sometimes when I open a skp with a subd-ed mesh in it, the mesh is invisible (but it's definitely there, as you can select a hollow box and it becomes visible if you toggle the subdivision off)...
Is there a fix for this? what causes this?
-
My Sub D experimentation is under way
-
I've notice a few people I have talked to and read in some post that there is a misconception that SubD isn't well suited to accurate or specific dimensions.
I modeled this as an example of an organic shape flowing into a very accurate connector. This would fit onto the other side of the connector I modeled it from. Right down to the 6.2mm holes to take 6mm contersunk engineering bolt.
This is all one piece and is a solid.
-
Cool result!
What is the render engine used ? -
Twilight Hobby.
-
@box said:
...I modeled this as an example of an organic shape flowing into a very accurate connector. This would fit onto the other side of the connector I modeled it from. Right down to the 6.2mm holes to take 6mm contersunk engineering bolt...
That´s a good hint and a nice example as well! (I thought of any new B & O speakers
)
Did you use the normal SU move tool for to snap and fix these exact points then?
Advertisement