[Plugin] GKWare Cabinet Maker

Garry K

Version 1.0.32 ready for download

utiler

Hi Garry, not sure what's going on here. I can't seem to get the plugin going....?
When I click to start the second point ['select right front corner"] won't happen. Neither will it allow me to enter a length in the VCB.

Any ideas?

Garry K

Andrew

Not sure what's happening with your setup.
Please email me with the email address I PM'd you with. We will get this working for you.

In the meantime. If you would open the Ruby Console and then try - maybe there are some errors.
Also - when you email me - please include your OS version and SU version.

Garry

Garry K

For some unknown reason Andrew hasn't picked up the PM that I sent him.

Users can also contact me via my web site.
http://cabmaker32.com/contact/

I see these emails just as fast as if you emailed me directly. I also respond fairly quickly. After I respond you would have my email address and I will have yours.

The last few releases are in response to a few users that have had some issues. They emailed me and I dug into the issues. Thanks to Scott, Bill, Grant and Piere.

utiler

Thanks Garry, all sorted now!

Garry K

Here is a video with cab maker and cut list pro integration.

Garry K

I'm thinking about adding a feature where you create a cabinet with create options:

Create Options
Drop down that has "Full Cabinet", "Door Fronts Only", "Door Fronts and Frames Only"

utiler

Hi Garry, is there a way for Cabmaker to identify material list as per what is in the current model?

Garry K

Yes - Go to the defaults tab.
That will show you what all the defaults are.

I do save defaults settings with each model.

utiler

Thanks but my defaults only show imperial_rules & imperial_rules_upper...?
How do I change it to metric?

Garry K

From the main menu choose

Extensions \ GKWare CabMaker \ Cab Maker - Edit Config

Set Filter to Imperial to filter out Imperial
OR - depending upon what you want
Set Filter to Metric to filter out Metric

Configuration Editor.PNG

utiler

I have that set to metric but still the defaults show imperial....

Garry K

Yes - you are filtering out Metric.
This setting will show everything else.

Garry K

Version 1.0.33 is now ready to download.

Added width adjustment for cabinet sides and top / bottoms.
Added bottom gap for frameless construction with overlay doors.
Modified reports. Changed Solid to Dimensioned Lumber so that the report would work with Cut List Plus.

utiler

@garry k said:

Yes - you are filtering out Metric.
This setting will show everything else.

Gotcha. Filtering is filtering out. A bit back to front but I understand now. thanks.

solo

Cabinet maker not working if you have Plusspec installed, I tried using it but it does not create any geometry or open any dialogs, I am assuming Plusspec is the cause as it started this behaviour after I installed the new version of Plusspec. However the Ruby console has this:

Error; #<SyntaxError; (eval);1; syntax error, unexpected tIDENTIFIER, expecting end-of-input
su"{dire">="olosp","wssa"drol">=evsa"sagil",snec>="ea",2l_...
                             ^>
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/utils_cabmaker.rbs;592;in `eval'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/utils_cabmaker.rbs;592;in `read_license'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/license_cabmaker.rbs;62;in `activate_license'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/cabmaker.rbs;240;in `activate'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/cabmaker.rbs;4523;in `select_tool'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/cabmaker.rbs;4523;in `block in <module;CabMaker>'
SketchUp;1;in `call'

Garry K

Just an assumption bug it looks like eval has been modified. Modifying built in objects is considered bad form.

At this moment I suggest that you disable Plus Spec and try again and see what happens.

solo

I just tried Cabinet maker using SU 2014 which does not have Plusspec installed and I am getting same behaviour, must be another issue.

Garry K

Pete,

I've sent you a PM with my email address. We can figure this out.

Garry

Garry K

For support users shoul contact me via my web site.
http://cabmaker32.com/contact/

This will get through to me almost immediately and no chance of going to trash.
I will then answer as quickly as possible.