[Plugin] GKWare Cabinet Maker

Garry K · 12 Feb 2016, 13:12

For some unknown reason Andrew hasn't picked up the PM that I sent him.

Users can also contact me via my web site.
http://cabmaker32.com/contact/

I see these emails just as fast as if you emailed me directly. I also respond fairly quickly. After I respond you would have my email address and I will have yours.

The last few releases are in response to a few users that have had some issues. They emailed me and I dug into the issues. Thanks to Scott, Bill, Grant and Piere.

utiler · 13 Feb 2016, 02:16

Thanks Garry, all sorted now!

Garry K · 13 Feb 2016, 17:59

Here is a video with cab maker and cut list pro integration.

Garry K · 14 Feb 2016, 16:14

I'm thinking about adding a feature where you create a cabinet with create options:

Create Options
Drop down that has "Full Cabinet", "Door Fronts Only", "Door Fronts and Frames Only"

utiler · 14 Feb 2016, 23:11

Hi Garry, is there a way for Cabmaker to identify material list as per what is in the current model?

Garry K · 14 Feb 2016, 23:18

Yes - Go to the defaults tab.
That will show you what all the defaults are.

I do save defaults settings with each model.

utiler · 14 Feb 2016, 23:29

Thanks but my defaults only show imperial_rules & imperial_rules_upper...?
How do I change it to metric?

Garry K · 14 Feb 2016, 23:36

From the main menu choose

Extensions \ GKWare CabMaker \ Cab Maker - Edit Config

Set Filter to Imperial to filter out Imperial
OR - depending upon what you want
Set Filter to Metric to filter out Metric

utiler · 14 Feb 2016, 23:47

I have that set to metric but still the defaults show imperial....

Garry K · 14 Feb 2016, 23:52

Yes - you are filtering out Metric.
This setting will show everything else.

Garry K · 15 Feb 2016, 01:18

Version 1.0.33 is now ready to download.

Added width adjustment for cabinet sides and top / bottoms.
Added bottom gap for frameless construction with overlay doors.
Modified reports. Changed Solid to Dimensioned Lumber so that the report would work with Cut List Plus.

utiler · 15 Feb 2016, 03:44

@garry k said:

Yes - you are filtering out Metric.
This setting will show everything else.

Gotcha. Filtering is filtering out. A bit back to front but I understand now. thanks.

solo · 16 Feb 2016, 15:43

Cabinet maker not working if you have Plusspec installed, I tried using it but it does not create any geometry or open any dialogs, I am assuming Plusspec is the cause as it started this behaviour after I installed the new version of Plusspec. However the Ruby console has this:

Error; #<SyntaxError; (eval);1; syntax error, unexpected tIDENTIFIER, expecting end-of-input
su"{dire">="olosp","wssa"drol">=evsa"sagil",snec>="ea",2l_...
                             ^>
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/utils_cabmaker.rbs;592;in `eval'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/utils_cabmaker.rbs;592;in `read_license'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/license_cabmaker.rbs;62;in `activate_license'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/cabmaker.rbs;240;in `activate'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/cabmaker.rbs;4523;in `select_tool'
c;/users/pete/appdata/roaming/sketchup/sketchup 2016/sketchup/plugins/gkware_cabmaker/cabmaker.rbs;4523;in `block in <module;CabMaker>'
SketchUp;1;in `call'

Garry K · 16 Feb 2016, 15:51

Just an assumption bug it looks like eval has been modified. Modifying built in objects is considered bad form.

At this moment I suggest that you disable Plus Spec and try again and see what happens.

solo · 16 Feb 2016, 16:03

I just tried Cabinet maker using SU 2014 which does not have Plusspec installed and I am getting same behaviour, must be another issue.

Garry K · 16 Feb 2016, 16:08

Pete,

I've sent you a PM with my email address. We can figure this out.

Garry

Garry K · 16 Feb 2016, 16:20

For support users shoul contact me via my web site.
http://cabmaker32.com/contact/

This will get through to me almost immediately and no chance of going to trash.
I will then answer as quickly as possible.

Garry K · 16 Feb 2016, 21:17

A user has found a bug and I've fixed it.

I will put out version 1.0.34 with the fix late tomorrow or early the next day.

The bug has to do with finished panels.

aadbuild · 17 Feb 2016, 20:41

Hi Garry i understand we have some type of clash between Plusspec and Cabinet maker? I can send you a beta version or vice versa of that helps? .
I had a quick look at what you are doing and it's fantastic. Good job, sometimes it takes a tradesman to build site specific software. It looks like it would compliment what we are doing with Plusspec.

solo · 17 Feb 2016, 20:45

@aadbuild said:

Hi Garry i understand we have some type of clash between Plusspec and Cabinet maker? I can send you a beta version or vice versa of that helps? .
I had a quick look at what you are doing and it's fantastic. Good job, sometimes it takes a tradesman to build site specific software. It looks like it would compliment what we are doing with Plusspec.

Andrew.

Figured out it has nothing to do with Plusspec, just a coincidental timing thing. It has to do with my login.