[Plugin][$] JointPushPull Interactive - v4.9a - 02 Apr 25

Einstein

Thank you

fredo6

NEW RELEASE: JointPushPull Interactive v4.4e - 02 Jun 19

JointPushPull Interactive 4.4e is a minor release including an increase of the maximum angle for Molding (now 85 degrees).

JointPushPull 4.4e requires LibFredo6 8.7m or above

See plugin home page of JointPushPull for Download of JointPushPull.

Main Post of the JointPushPull thread on this forum

Fredo

Einstein

Thank you, for me it's a major release

jonnys777

Morning all,

I'm getting the follow error trying to thicken some terrain on the z-axis;

Date: 20-Jun-19 08:06:15
An error occurred in Vector Push Pull
Error in generation of the geometry

Could not compute valid matrix from points

body_lib6g6.rbe: 4568 -- position_material
body_lib6g6.rbe: 4568 -- reverse_face_with_uv
jointpushpullgeometry.rbe: 556 -- block in geometry_handle_finishing
jointpushpullgeometry.rbe: 556 -- each
jointpushpullgeometry.rbe: 556 -- geometry_handle_finishing
jointpushpullgeometry.rbe: 376 -- geometry_robot_handle_finishing
jointpushpullgeometry.rbe: 222 -- robot_call_action
jointpushpullgeometry.rbe: 183 -- geometry_robot_exec
jointpushpullgeometry.rbe: 166 -- geometry_robot
jointpushpullgeometry.rbe: 81 -- block in geometry_execute
lib6operation.rbe: 370 -- call
lib6operation.rbe: 370 -- step_geometry
lib6operation.rbe: 305 -- block in yield?
SketchUp: 1 -- call

jonnys777

@jonnys777 said:

Morning all,

I'm getting the follow error trying to thicken some terrain on the z-axis;

Date: 20-Jun-19 08:06:15
An error occurred in Vector Push Pull
Error in generation of the geometry

Could not compute valid matrix from points

body_lib6g6.rbe: 4568 -- position_material
body_lib6g6.rbe: 4568 -- reverse_face_with_uv
jointpushpullgeometry.rbe: 556 -- block in geometry_handle_finishing
jointpushpullgeometry.rbe: 556 -- each
jointpushpullgeometry.rbe: 556 -- geometry_handle_finishing
jointpushpullgeometry.rbe: 376 -- geometry_robot_handle_finishing
jointpushpullgeometry.rbe: 222 -- robot_call_action
jointpushpullgeometry.rbe: 183 -- geometry_robot_exec
jointpushpullgeometry.rbe: 166 -- geometry_robot
jointpushpullgeometry.rbe: 81 -- block in geometry_execute
lib6operation.rbe: 370 -- call
lib6operation.rbe: 370 -- step_geometry
lib6operation.rbe: 305 -- block in yield?
SketchUp: 1 -- call

I'm not having much luck resolving this. I've tried scaling up and inspecting the surface to see if there's anything obviously wrong. It allows Normal Push Pull, but Vector, Joint etc. all fail.

Any ideas as to what might be wrong?

It's a fairly complex surface - a piece of terrain that is a hill with sections cut out of it (I draped a road onto the surface so that counts as a separate surface, for example). The surface I want to extrude is vegetation and I need it locked to the z-axis otherwise the software I intend to import it into won't work properly.

Many thanks

fredo6

@jonnys777 said:

I'm not having much luck resolving this. I've tried scaling up and inspecting the surface to see if there's anything obviously wrong. It allows Normal Push Pull, but Vector, Joint etc. all fail. Any ideas as to what might be wrong?

I included a fix in LibFredo6 9.0a

@jonnys777 said:

It's a fairly complex surface - a piece of terrain that is a hill with sections cut out of it (I draped a road onto the surface so that counts as a separate surface, for example). The surface I want to extrude is vegetation and I need it locked to the z-axis otherwise the software I intend to import it into won't work properly.

If you post or PM me the model, I can have a look and advise.

jonnys777

@fredo6 said:

@jonnys777 said:

I'm not having much luck resolving this. I've tried scaling up and inspecting the surface to see if there's anything obviously wrong. It allows Normal Push Pull, but Vector, Joint etc. all fail. Any ideas as to what might be wrong?

I included a fix in LibFredo6 9.0a

Hi Fredo, I can confirm the updated version of LibFredo has solved my issues. Many thanks, and keep up the good work.

DigitalArena

Have a problem with one installation of this set of tools on Pro 2019. We have the latest Fredo6Lib. We have installed the latest JointPushPull plugin. The tools appear in the toolbar. But when you select the surface and then the tool, the tool doesn't become active. You remain with the mouse pointer and it doesn't change to the selected JointPushPull tool.

Any idea why this would be happening?

We installed the same setup on another computer and everything is fine. Thoughts?

Dave R

When SketchUp 2019 was installed, did you right click on the installer and choose Run as administrator?

deaneau

Feature Request in this Plugin

Hi Fredo is this possible to have an offset of faces with the same material?

I need this for a game.

The windows in the night will be the only face that has an offset. this face will save as a separate file (night mesh).

big thank you

Ahmed0007

Getting a bugsplat when trying to change the random push pull values. in sketchup 2019 and 18
any solution?

Dave R

@ahmed0007 said:

Getting a bugsplat... any solution?

You'd need to provide some useful information to be able to diagnose the problem and find a solution. Share the SKP file and the values you are trying to use.

Ahmed0007

@dave r said:

@ahmed0007 said:

Getting a bugsplat... any solution?

You'd need to provide some useful information to be able to diagnose the problem and find a solution. Share the SKP file and the values you are trying to use.

here are:

J.skp

Dave R

I don't have any problems with your file in SU2019.
Random PushPull.gif
Click on the picture to see it move.

Make sure have the current version installed along with the current version of LibFredo6 and make sure you installed SketchUp correctly. That is, you right clicked on the installer and selected Run as administrator from the context menu.

Ahmed0007

@dave r said:

I don't have any problems with your file in SU2019.
[attachment=0:22w16jj0]Random PushPull.gif[/attachment:22w16jj0]
Click on the picture to see it move.

Make sure have the current version installed along with the current version of LibFredo6 and make sure you installed SketchUp correctly. That is, you right clicked on the installer and selected Run as administrator from the context menu.

yesterday i installed both JPP and Fredo6lib
everything is up to date
watch this https://streamable.com/oqz8g

fredo6

I am unable to reproduce the problem either....

Do you get it always?

Fredo

Ahmed0007

and latest version of JPP is working fine with SU2017

Ahmed0007

@fredo6 said:

I am unable to reproduce the problem either....

Do you get it always?

Fredo

Thanks for reply

i haven't used random push pull a lot.
i found an old version of JPP (v3.6a) this also give me bugsplat screen. in su19
watch here : http://bit.ly/31SyEk5

Edit ; and latest version of JPP is working fine with SU2017

Dave R

You never answered my question about proper installation of SketchUp. Did you install SketchUp 2018 and 2019 correctly?

Ahmed0007

@dave r said:

You never answered my question about proper installation of SketchUp. Did you install SketchUp 2018 and 2019 correctly?

sorry i don't remember that how i had installed.
but give main an hour to reinstall as you said.