ComponentInstance name and Group name

njeremy2 · 26 Apr 2012, 15:25

this is my code :

	#Explode all components and groups
	def Explosion(entities)
		nb = 0
		componentOrGroup = true
		#Stop until there is no group ou component left
		while 1
			found = false
			if componentOrGroup == false
				break
			end
			entities.each do |chose|
				if chose.typename == "ComponentInstance" || chose.typename == "Group" || ????
					if chose.name[0] != 95	#We check if the first character is "_" from ASCII table, if it's right we explode the group or component
						chose.explode
						nb += 1
						found = true
					end
				end
			end
			if found == false
				componentOrGroup = false
			end
		end
		return nb
	end

Dan Rathbun · 26 Apr 2012, 17:00

Do not use typename, is VERY slow.

Use .is_a?()

ie:

if chose.is_a?(Sketchup::ComponentInstance) || chose.is_a?(Sketchup::Group)

thomthom · 26 Apr 2012, 18:22

Yes - as Dan says never ever use .typename .

TIG · 26 Apr 2012, 18:24

There is NO || ????
You could try alternative tests: e.g. if it's an instance get the instance.definition.name etc

Also methods [def] should start with a lower-case letter...

TIG · 26 Apr 2012, 18:30

Let's put this another way...
What are you trying to do?
[In words, not 'code'...]
I deduce that it's to find if something is an instance and then check that instance.definition.name against a 'text' pattern ??

If so it is much easier than you are making it...

njeremy2 · 26 Apr 2012, 19:36

thx ! I'll try this tomorrow

Hmmm let me explain, it's little bit difficult for me to explain that in English

I want to create a plugin which count every components and groups in the design.
With this plugin, you can calculate the texture you need for a group or component (Tomorrow, I will take screenshot to show you my work (but it's in French...)

For example, I have a component called "Wood Table" (definition name) and you call it "Table 200x300"
My plugin will count how many tables I have on design and how much texture of Wood I apply on all tables.
If I don't the plugin calculate the texture (I hope you understand this sentence ), I have to put "_" (character n° 95 in ASCII TABLE) and the plugin ignore the Table. (ex: "Table 200x300 --> "_Table 200x300")
But in my case, it only work for the name of groups and component, but I want to add the case for component-name. How should I do ?

Thanks a lot to everyone !

Jeremy

TIG · 26 Apr 2012, 21:44

Instead of iterating entities to get all instances and then find their definitions, why not iterate the definitions list to get their instances ?

njeremy2 · 26 Apr 2012, 22:18

@tig said:

Instead of iterating entities to get all instances and then find their definitions, why not iterate the definitions list to get their instances ?

I just beginning ruby for sketchup less than 7 days, I don't know anything...

I just modified the code from someone.
Tomorrow, I will show you exactly what i'm trying to do.
I don't have sketchup in that computer

thomthom · 26 Apr 2012, 22:33

I wrote a summary about instances and definitions in SketchUp: http://www.thomthom.net/thoughts/2012/02/definitions-and-instances-in-sketchup/
Hope it might help.

njeremy2 · 27 Apr 2012, 06:47

@thomthom said:

I wrote a summary about instances and definitions in SketchUp: http://www.thomthom.net/thoughts/2012/02/definitions-and-instances-in-sketchup/
Hope it might help.

I already read it thanks you !

njeremy2 · 27 Apr 2012, 07:35

My plugin :

My group has a name : "GroupWood"
2 same components : 1 with name "Bench1" and the 2nd without name.
The plugin will retrive all informations and put that in table in HTML webpage.
In component section, if the name of component is empty, the plugin retrive definition name. If it has a name, it takes the name.

If I put "" before the name of the group or name of component, the plugin ignore the texture of them.
But if I put "" before the definition name, it doesn't work. I would like to add this third condition my program.

Someone can help me ?

TIG · 27 Apr 2012, 09:06

You are not making this easy by hiding your code from use and then expecting us to 'fix' it.
Here is how I would check some text [refernced as 'str'] to see it it starts with a ''
str=~/^_/
If there's no match it returns 'nil' if there's a match you get 0.
So to test a 'name' against the pattern just use
` if name=~/^/

do something

endTest the group.name, instance.nameand instance.definition.name` in turn

njeremy2 · 27 Apr 2012, 12:16

I'm not hiding anything, I just forgot to sent you! ^^


=begin
author ; njeremy2
# This software is provided as an example of using the Ruby interface
# to SketchUp.

# Permission to use, copy, modify, and distribute this software for 
# any purpose and without fee is hereby granted, provided that the above
# copyright notice appear in all copies.

# THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
=end

Sketchup;;require 'sketchup'

# Conversion pouces² vers m²
def p2m2(superficie)
	superficie/1550.0
end

#Conversion pouces3 vers m3
def p2m3(volume)
	volume/61023.7440947323
end

#Ajoute à la classe float une méthode permettant d'arrondir avec 2 chiffres après la virgule
class Float
	def round2
		i=((self*100).round.to_f)/100
		return i
	end
end

#Permet d'exporter dans un fichier html le nom et la quantité des Composants, Matières, Groupe (+volume). L'utilisateur peut choisir d'exporter les données qu'il souhaite
#L'utilisateur peut choisir d'ignorer certains composants ou groupes (comme les végétaux) en les préfixant d'un _
class Export
	#Initialisation
	def initialize
		UI.messagebox "Variables chargés 1"
		@model = Sketchup.active_model
		@entities = @model.entities
		@materials = @model.materials
		UI.messagebox "Variables chargés 2"
		
		
		
		
		
		
		
		@tabGroupes = []
		@tabMateriaux = []
		@tabComposants = []
		@nomFichier = @model.path
		@cheminScript= '/ATI/scripts/exportS.html'
		4.times do
			@nomFichier.chop!
		end
		@nomFichier += "_ExportS.html"
		input()
	end
	
	#Demande de renseignements à l'utilisateur
	def input
		prompts = ["Nom et chemin du fichier à exporter", 
			   "Composants",
			   "Matières en m²",
			   "Groupes"
			   ]
			   # "Volume des Groupes" supprimé du formulaire
		defs = ["#{@nomFichier}", "Oui", "Oui", "Oui", "Non"] # "non" supprimé pour volume des groupes
		list = ["", "Oui|Non", "Oui|Non", "Oui|Non"]		
		resultats = inputbox(prompts, defs, list, "Paramétrer l'export")
		@nomFichier = resultats[0].to_s
		@composants = resultats[1].to_s
		@matiere = resultats[2].to_s
		@groupe = resultats[3].to_s
		# @volume = resultats[4].to_s
	end
	
	#Exporte le nombre et le nom de chaque chose dans un fichier html défini par l'utilisateur
	def exporter
		listerElements()

		#Créer le fichier
		fichierExport = File.new("#{@nomFichier.to_s}", "w")
		
		#Ecrire les informations dedans
		#Formulaire html
		fichierExport.write "<html>"
			fichierExport.write "<form method=\"GET\" action=\""
			fichierExport.write @cheminScript.to_s
			fichierExport.write "\">"
			
			#Titre en haut a gauche de l'écran (titre du fichier de sauvegarde)
			fichierExport.write "<head>"
				fichierExport.write "Projet ; <b>"+(@model.title).to_s+"</b><br />"
				fichierExport.write "<input type=\"hidden\" value=\"#{@model.title}\" name=\"nomModele\">"
			fichierExport.write "</head>"
			
			#Tableau
			fichierExport.write "<table border=\"1\" align=\"CENTER\">"
			
			#Affichage des têtes de colonnes
			fichierExport.write "<tr><td></td><td bgcolor=\"#99FF00\"><b>Nom</b></td><td bgcolor=\"#99FF00\"><b>Quantité ou surface</b></td></tr>"
			
			#Composants
			fichierExport.write "<tr><td bgcolor=\"#7CF8F8\"><b>Composants</b></td></tr>"
			i = 0
			@tabComposants.each do |composants|
				fichierExport.write "<tr><td></td>"
				fichierExport.write "<td>"
				if (composants[0].name == "")
					fichierExport.write (composants[0].definition.name).to_s
					fichierExport.write "<input type=\"hidden\" value=\"#{composants[0].definition.name}\" name=\"nomComposant#{i}\">"
					else
					fichierExport.write (composants[0].name).to_s
					fichierExport.write "<input type=\"hidden\" value=\"#{composants[0].name}\" name=\"nomComposant#{i}\">"
				end #endif
				fichierExport.write "</td>"
				# fichierExport.write "<td>" ## Ajout colonne début
				# fichierExport.write (composants[0].definition.name).to_s
				# fichierExport.write "<input type=\"hidden\" value=\"#{composants[0].definition.name}\" name=\"nomComposant#{i}\">"
				# fichierExport.write "</td>" ## Ajout d'une colonne fin
				fichierExport.write "<td>"
				fichierExport.write composants[1].to_s
				fichierExport.write "<input type=\"hidden\" value=\"#{composants[1].to_s}\" name=\"nbComposant#{i}\">"
				fichierExport.write "</td>"
				fichierExport.write "</tr>"
				i += 1
			end			
			
			#Groupes
			fichierExport.write "<tr><td bgcolor=\"#7CF8F8\"><b>Groupes</b></td></tr>"
			i = 0
			@tabGroupes.each do |groupe|
				fichierExport.write "<tr><td></td>"
				fichierExport.write "<td>"
				fichierExport.write (groupe[0].name).to_s
				fichierExport.write "<input type=\"hidden\" value=\"#{(groupe[0].name).to_s}\" name=\"nomGroupe#{i}\">"
				fichierExport.write "</td>"
				# fichierExport.write "<td>" ## Ajout colonne début
				
				
				
				# fichierExport.write "</td>" ## Ajout d'une colonne fin
				fichierExport.write "<td>"
				fichierExport.write groupe[1].to_s
				fichierExport.write "<input type=\"hidden\" value=\"#{groupe[1].to_s}\" name=\"nbGroupe#{i}\">"
				fichierExport.write "</td>"
				# #Si on gère les volumes et que le groupe n'est pas plat, on affiche son volume
				# if @volume == "Oui" && p2m3(groupe[0].volume) > 0
					# fichierExport.write "<td>"
					# fichierExport.write (p2m3(groupe[0].volume).round2).to_s
					# fichierExport.write " m3"
					# fichierExport.write "<input type=\"hidden\" value=\"#{(p2m3(groupe[0].volume).round2).to_s}\" name=\"volumeGroupe#{i}\">"
					# fichierExport.write "</td>"
				# end
				fichierExport.write "</tr>"
				i += 1
			end
			
			if @matiere == "Oui"
				#tout péter
				nb = eclater(@entities)
				
				#Calculer la surface des matériaux
				calculerSurfaceMateriau(@entities)
				
				#On purge le tableau des matériaux qui n'ont pas de surface (cas qui peut arriver s'il y a des végétaux et que l'utilisateur à préfixé le nom
				#avec un _
				@tabMateriaux = purgerTab(@tabMateriaux)				
				
				#tout reconstruire
				annuler(nb)
			end
			
			#Matières
			fichierExport.write "<tr><td bgcolor=\"#7CF8F8\"><b>Matières</b></td></tr>"
			i = 0
			@tabMateriaux.each do |matiere|
				fichierExport.write "<tr><td></td>"
				fichierExport.write "<td>"
				fichierExport.write (matiere[0].display_name).to_s
				fichierExport.write "<input type=\"hidden\" value=\"#{matiere[0].display_name.to_s}\" name=\"nomMat#{i}\">"
				fichierExport.write "</td>"
				# fichierExport.write "<td>" ## Ajout colonne début
				
				
				
				# fichierExport.write "</td>" ## Ajout d'une colonne fin
				fichierExport.write "<td>"
				fichierExport.write (matiere[1].round2).to_s
				fichierExport.write " m²"
				fichierExport.write "<input type=\"hidden\" value=\"#{matiere[1].round2.to_s}\" name=\"surfaceMat#{i}\">"
				fichierExport.write "</td>"
				fichierExport.write "</tr>"
				i += 1
			end	
		
			#Nombre de groupes, de composants et de matériau
			fichierExport.write "<input type=\"hidden\" value=\"#{@tabGroupes.length}\" name=\"nbGroupes\">"
			fichierExport.write "<input type=\"hidden\" value=\"#{@tabComposants.length}\" name=\"nbCompos\">"
			fichierExport.write "<input type=\"hidden\" value=\"#{@tabMateriaux.length}\" name=\"nbMats\">"
		
		#Fermeture des balises et bouton d'export au format csv
			fichierExport.write "</table>"
			fichierExport.write "<br />"
			fichierExport.write "<input type=\"submit\" value=\"Exporter au format csv\">"
			fichierExport.write "</form>"
		fichierExport.write "</html>"
		
		#Fermer le fichier
		fichierExport.close
		
		#Message pour l'utilisateur
		UI.openURL @nomFichier	
		
	end	
	
	#Crée un tableau avec tout les éléments comptés par type
	def listerElements	
		#On parcours tout les éléments et on les comptes
		@entities.each do |groupes|
			if groupes.typename == "Group" && @groupe == "Oui"
				compter(groupes, 1)
			elsif groupes.typename == "ComponentInstance" && @composants == "Oui"
				compter(groupes, 2)
			end
		end
		if @matiere == "Oui"
			#On purge les matériaux inutilisés
			@materials.purge_unused
			@materials.each do |materiau|
				compter(materiau, 3)
			end	
		end
	end
	
	#Regarde l'objet passé en paramètre et en tient le compte dans le tableau correspondant
	def compter(chose, type)
		#Init
		trouve = false
		
		#On récupère le tableau qu'on l'on va devoir traiter
		tab = @tabGroupes if type == 1
		tab = @tabComposants if type == 2
		tab = @tabMateriaux if type == 3
		#x représente le nombre d'occurences, si c'est un matériau on l'initialise à 0 car on contera la surface totale plus tard.
		#si c'est un groupe ou composant on l'initialise à 1 pour pouvoir compter
		if type > 2
			x = 0
		else
			x = 1
		end
		
		
		#On regarde si l'élément existe déja, si oui on incrémente la case du tableau qui compte, si non on ajoute une nouvelle case
		tab.each do |element|
			if chose.name == element[0].name
				element[1] += x
				trouve = true
			end
		end
		
		if trouve == false
			tab.push([chose, x])
		end
		
		#on rend le tableau que l'on à traité
		@tabGroupes = tab if type == 1
		@tabComposants = tab if type == 2
		@tabMateriaux = tab if type == 3
	end
	
	#Calcule la surface de chaque matériau
	def calculerSurfaceMateriau(entities)
		#Récupérer toutes les faces
		tabFaces = []
		entities.each do |element|
			if element.typename == "Face"
				tabFaces.push(element)
			end
		end
		
		#On regarde si la face possède un matériau, et si oui on calcule la surface
		tabFaces.each do |face|
			materiau = face.material
			materiauBack = face.back_material
			if materiau	|| materiauBack			
				surface = p2m2(face.area)
				@tabMateriaux.each do |materiauxEnregistres|
					if materiau
						if materiauxEnregistres[0].display_name == materiau.display_name
							materiauxEnregistres[1] += surface
						end
					end
					if materiauBack
						if materiauxEnregistres[0].display_name == materiauBack.display_name
							materiauxEnregistres[1] += surface
						end
					end
				end
			end
		end
	end

	#Eclate tout les groupes et composants
	def eclater(entities)
		nb = 0
		composantOuGroupe = true
		#Tant qu'il reste un composant ou un groupe, on boucle en permanence pour tous les éclater. Dès qu'il n'y en a plus, on arrête		
		while 1
			trouve = false
			if composantOuGroupe == false
				break
			end
			# UI.messagebox "texte juste avant la boucle"
			entities.each do |chose|
				if chose.typename == "ComponentInstance" || chose.typename == "Group" 
				# UI.messagebox "Texte juste apres qu'il vérifie si c'est un groupe ou si c'est un composant"
					if chose.name[0] != 95	#On vérifie que la premiere lettre ne soit pas un _ (on compare les codes ascii), [0] designe la position du caractere a rechercher
						chose.explode
						nb += 1
						trouve = true
					end
				end
			end
			if trouve == false
				composantOuGroupe = false
			end
		end
		return nb
	end
	
	#Annule nb actions
	def annuler(nb)
		nb.times do
			Sketchup.undo
		end
	end
	
	#Recoit un tableau de tableau et le vide des éléments uniques
	def purgerTab(tab)
		tabReturn = []
		tab.each do |element|
			if element[1] != 0
				tabReturn.push(element)
			end
		end
		return tabReturn
	end
end

TIG · 27 Apr 2012, 13:12

Something like

if (chose.is_a?(Sketchup;;ComponentInstance) && chose.definition.name=~/^_/ ) || (chose.name=~/^_/)
  chose.explode
  nb += 1
  trouve = true
end

njeremy2 · 27 Apr 2012, 14:59

it didn"t work ...

I will try something else. Another way

I practice in how I get the name of definition through a table, and then I will associate that with my code

TIG · 27 Apr 2012, 16:11

If you have a reference to the instance you can easily get its definition, from which you can easily get the name of that.
I don't see where the difficulty is ?
You just need to add some extra tests to your code of instances... in more than one place - my example was how to get the initial name to use...

njeremy2 · 27 Apr 2012, 20:36

@tig said:

If you have a reference to the instance you can easily get its definition, from which you can easily get the name of that.
I don't see where the difficulty is ?
You just need to add some extra tests to your code of instances... in more than one place - my example was how to get the initial name to use...

Yeah but i'm beginning ! so I have to learn what is exactly the difference between componentdefinition and componentinstance, it's hard for me !

Every document is written in english, I have to translate some words and then i have to understand each specific vocabulary of sketchup ... (in less than 1 week !)

I have to go easily on that !!

I will continue monday because I have no tools to continue at home

thx TIG!

njeremy2 · 30 Apr 2012, 08:36

Hi everyone !

I have found how to correct my code !!

It's was just an error of algorithm.

At first time I had this condition :

chose.name[0] != 95

And I would like to have this :

chose.name[0] != 95 || chose.definition.name[0] != 95

but it doesn't work ...

The solution is :

chose.name[0] != 95 && chose.definition.name[0] != 95

As I said, I'm beginning !

Thanks to all! especially TIG