SU 9 Wishlist

Gaieus

Yes TIG but what he is saying is that it would be betterif you didn't need to move your face back a bit and SU would (still) display what is exactly on the cut (rather than hiding it already).

To me, it would sound logical, too.

ArCAD-UK

@tig said:

I suppose I could adjust my code to has a <None> option under face material so all faces are auto-deleted for you

Your app works just fine as is TIG, no criticism intended! As Gaieus has recognised it would be logical for the S.U. section process to make that little change from < to <= in the display calculation and bring many benefits with no negatives to the drawing process.

TIG

I've tweaked SectionCutFace to v2.5 here http://forums.sketchucation.com/viewtopic.php?p=315619#p315619
'<No_Face>' option added, so you get just lines without faces.
'Lock Cut' option added.
A class test replaces typename, optimizing speed.

publied

I was thinking to multithreading and 64-bit supports. But it would not hurt to have even support to Android. So we have SU for Tablet PCs and Linux. Not so bad.

2Harry2

The ability to force a snap to a specific point, especially a mid-point or circle center, instead of having to estimate by eye and hover the cursor over your best guess, which sometimes takes a while, and sometimes doesn't seem to work at all.
Making the zoom function behave logically when the cursor is over empty space (as someone else already pointed out)
Allowing construction line placement to snap to points not on the plane of the construction line

jgb

@2harry2 said:

The ability to force a snap to a specific point, especially a mid-point or circle center, instead of having to estimate by eye and hover the cursor over your best guess, which sometimes takes a while, and sometimes doesn't seem to work at all.

Making the zoom function behave logically when the cursor is over empty space (as someone else already pointed out)

Point #1, SU will readily snap to a circles center if you run the cursor around the circumference then hover near the perceived center. Won't work on exploded curves.

#2; Been bitchin about this for 3 years now; others probably longer. SU Development will rather add more bells and whistles than tune up existing cracked bells and blocked whistles.

rv1974

I'd like see the real change in the performance field.
Something like this:
[flash=700,450:11o27hhi]http://www.youtube.com/v/Gz6bOU4JX1w[/flash:11o27hhi]
EDIT: I fixed your faulty flash-code and linking... TIG

rv1974

Additional teasing:
http://www.youtube.com/watch?v=VdxwWKBy4gU&feature=player_embedded#at=104
@TIG: thank you. Could anyone teach me how to transform url to the flash preview please?

Gaieus

@rv1974 said:

Could anyone teach me how to transform url to the flash preview please?

Here is a topic:
http://forums.sketchucation.com/viewtopic.php?f=79&t=10103

Jim also made a browser plugin (sometimes you may want to adjust the size to make it "nicer" but not necessary):
http://forums.sketchucation.com/viewtopic.php?f=179&t=28717

thomthom

@rv1974 said:

I'd like see the real change in the performance field.
Something like this:

meh wants!!!

rv1974

[flash=640,390:2bmvkra9]http://www.youtube.com/v/VdxwWKBy4gU&feature=player_embedded#at=104[/flash:2bmvkra9]
@Gaieus:

TIG

@rv1974 said:

Additional teasing:

@TIG: thank you. Could anyone teach me how to transform url to the flash preview please?

Edit your original post and read what I added...
To embed most movies this method works...
Note that I've added spaces into the [url] and [flash] tags to 'break' them so you can read them !
[url ]http://www.youtube.com/watch?v=VdxwWKBy4gU&feature=player_embedded#at=104[/url ]
http://www.youtube.com/watch?v=VdxwWKBy4gU&feature=player_embedded#at=104
becomes the flash code
[ flash=700,450]http://www.youtube.com/v/VdxwWKBy4gU[/flash ]
[flash=700,450:1jujbepr]http://www.youtube.com/v/VdxwWKBy4gU[/flash:1jujbepr]
Note how you specify the flash= width,height in pixels for the embedded 'window' and [for YouTube files at least] you change the http path to ...com/v/MovieTag

watkins

It would be useful if when selecting the circle tool the circle pointer icon displayed the currently set number of segments. This small addition would prompt the user to consider 'more or less' segments before drawing the circle.

Regards,
Bob

jgb

@watkins said:

It would be useful if when selecting the circle tool the circle pointer icon displayed the currently set number of segments. This small addition would prompt the user to consider 'more or less' segments before drawing the circle.

Regards,
Bob

It Does this now.
When you click on the circle or arc tools, the current number of segments are shown in the VCB (Measurements box). Usually 24 for the circle and 12 for the arc.
Start your circle/arc and that is the segments you draw in, until you select the tool next.

To change the segment value, click on the tool, and then, before any draw operation, type the number of segments you want followed by "S" and <enter>. The tool stays in that segment count till you select the tool again and change it.

You cannot change the segment count after you start to draw. However, you need to select some other tool or the select <spacebar> first, before the circle/arc tool again.

watkins

Dear Joel,

Yes, I know about the VCB box displaying the number of segments, and I should check it more often than I do, but I often forget. What I am suggesting is a 'prompt' to remind you to change (or not) the number of segments.

Kind regards,
Bob

Crankston Shnord

BumpMaps, I definately want a good bumpmapping tool.

brodie

@jgb said:

It Does this now.
When you click on the circle or arc tools, the current number of segments are shown in the VCB (Measurements box). Usually 24 for the circle and 12 for the arc.
Start your circle/arc and that is the segments you draw in, until you select the tool next.

Cool, didn't know that. It would be nice if when you clicked on an already created circle, though, the segments would still pop up in the VCB. Currently it displays nothing there. That's about the only thing I use the entity info bar for so it'd be nice to totally do away with that.

-Brodie

ken

What I would want is more menu options, i.e. Edit#1, Edit#2, Edit #3,Draw#1, Draw#2, Draw#3, Tool#1, Tools#2, Tools#3, and Plugin#1, Plugin#2, Plugins#3. And also the possibly to rename each. So if you had no plugins in Edit#1, it wouldn't show. However, if you wanted, you could name Edit#1 to Cleanup Tools, and so on. This way, my plugin menu option would not be required to have all the plugins which it now has and I could sort the plugins by actions or functions.

Ken

jgb

@unknownuser said:

It would be nice if when you clicked on an already created circle, though, the segments would still pop up in the VCB. Currently it displays nothing there. That's about the only thing I use the entity info bar for so it'd be nice to totally do away with that.
-Brodie

If you keep the Entity Info box open all the time, and you select an arc or circle, it will tell you how many segments there are, and the Radius (for the circle) or arc length.

If the circle has not been exploded (fully intact) you can change the number of segments and/or the radius by changing the non-grayed out values in the Entity Info box. For non-intact circles/arcs, there are some elements that can be changed that way, but with varying results.

brodie

@jgb said:

@unknownuser said:

It would be nice if when you clicked on an already created circle, though, the segments would still pop up in the VCB. Currently it displays nothing there. That's about the only thing I use the entity info bar for so it'd be nice to totally do away with that.
-Brodie

If you keep the Entity Info box open all the time, and you select an arc or circle, it will tell you how many segments there are, and the Radius (for the circle) or arc length.

If the circle has not been exploded (fully intact) you can change the number of segments and/or the radius by changing the non-grayed out values in the Entity Info box. For non-intact circles/arcs, there are some elements that can be changed that way, but with varying results.

right right, and it's not a huge box or anything. currently i just always keep it minimized all the time and only 'open' it on the occasion that I need to change the # of segments. My point is simply that this is literally the only thing I use it for, so replacing that one function and moving it to the VCB would be a nice little space saver for my screen.

-Brodie