30 60 Degrees Perspektif

TIG

You mean a 30/60 ISOMETRIC view ? Or a 30/30 ?
I think Didier did something on that...
Searching - will post back...

This is an Isometric Style that adds an isometric paper underlay that might help get a view right...
http://forums.sketchucation.com/viewtopic.php?p=121278#p121278

An AXONOMETRIC view has no the axes at 30/60 or 45/45 degrees ?

Wo3Dan

Hi Gaieus,

I don't understand your question. Are you having problems with the model?

Printing (Front) to scale is possible, resulting in 30/60-axonometric view. With or without the line cube visible.
In fact the lines making up the block A are there only for informative reasons. It could have been anything, as long as there is at least one entity, preferably on a turned of layer. The same for component B. And as long as you do have the distorted component B with A in it.

Place your model in A and it will show in a correct axonometry. One that you can print to scale.

As for projections, I only mentioned it in case someone wants to write a script. It would be nice to include a projection option too.

Note that rotating your model inside A by 90 drgrees will give you the correct axonometric view from the side, still in SU's Front view...etc.

So what is not correct with this technique?

Wo3Dan

Gaieus

I did not say it is not correct, did I?
What I meant was that you need to "distort" the geometry to get this view - unless I completely oversaw something.

Wo3Dan

@gaieus said:

I did not say it is not correct, did I?
What I meant was that you need to "distort" the geometry to get this view - unless I completely oversaw something.

That's why I said I did not understand. But forget about it.

%(#0000FF)[Yes and no. You only do it once. In fact I already just did it for you or for whoever needs it, for all future models.
From now on SU distorts your (any) model that you place inside A. In a split second. To a proper 30/60 axonometry.]

If you open SU twice you can even work with copy and paste in place to speed things up without the bother of working near/in component A.
That's why it would be handy to convert the whole (simple) procedure into aa script to have an extra standard view: 30/60 axonometry.

For now, save the file as a template for future use

How about you writing the plugin+button for us?

Wo3Dan

Gaieus

Come on, Wodan! You know I cannot script!

But indeed, if this is only like a snap as you say, good idea for a plugin.

(Any takers?)

Wo3Dan

@tig said:

This will do it......

Thanks TIG. And you didn't even take a break for coffee? Amazing how you guys put these things together!!! All my attempts to grasp ruby have been without success so far. Gaieus, we are in the same corner.

Now let's see if I can get it to work to see what it does to my PC.

Wo3Dan

TIG

Remember that after setting the axo or iso view you can only zoom in/out and pan, orbiting will mess up the view.
So it's a good idea to set the axo or iso then pan/zoom to the required view and save it as a Scene tab. Then you can mess around orbiting etc to make the model, but return to the axo or iso view by clicking its Scene tab...

TIG

This will do it

### 2010 (c) TIG
### paste code into a file in Plugins folder as 'axo+iso.rb'
### sets camera to 30/60 axonometric view and zooms extents
require 'sketchup.rb'
###
def axo3060
  model=Sketchup.active_model
  view=model.active_view
  camera=view.camera
  eye=Geom;;Point3d.new(-25.3259,-5.00502,463.851)
  target=Geom;;Point3d.new(10.9614,15.9032,41.225)
  up=Geom;;Vector3d.new(0.862238,0.496811,0.0986113)
  perspective=false
  newcamera=Sketchup;;Camera.new(eye,target,up,perspective)
  view.camera=newcamera
  Sketchup.send_action("viewZoomExtents;")
end
### sets camera to 30/30 isometric view and zooms extents
def iso3030
  model=Sketchup.active_model
  view=model.active_view
  camera=view.camera
  eye=Geom;;Point3d.new(-219.18,-239.658,258.471)
  target=Geom;;Point3d.new(72.869,52.1777,-23.5562)
  up=Geom;;Vector3d.new(0.398992, 0.398701, 0.825738)
  perspective=false
  newcamera=Sketchup;;Camera.new(eye,target,up,perspective)
  view.camera=newcamera
  Sketchup.send_action("viewZoomExtents;")
end
###
###

To use it type axo3060 in the Ruby Console - it sets the camera and zooms extents...
The axes are set at 30/60 degrees [G/R], perspective is 'off' and the verticals [B] are vertical...
OR type iso3030 in the Ruby Console and the axes are set at 30/30 degrees [G/R] etc...

Gaieus

Tanks TIG - and of course, Wodan, too.

david_h

I didn't realize he was asking for Axonometric. I thought it was just a standard 30 /60 perspective. My bad.

TIG

@unknownuser said:

I didn't realize he was asking for Axonometric. I thought it was just a standard 30 /60 perspective. My bad.

IF he did then your method is dead easy... just draw guide or line parallel to a side and rotate it 60 degrees... stand you camera on the line and everything is as you showed...

d_r_i_x

i've been looking for something like this for quite some time now. Works a treat.
Would it also be possible to have it show a 45 45 axonometric view?

TIG

@d_r_i_x said:

i've been looking for something like this for quite some time now. Works a treat.
Would it also be possible to have it show a 45 45 axonometric view?

It would be axo4545 and also axo6030 - however they are the end of a list right now...

elaohu

in addition to what i mentioned, the ruby file by Tif, the red and green lines are right, but the vertical blue line is wrong (the view is wrong), but i dont know how to fix that???? anybody??
just need to change the vertical view in axo like the one in iso in the code, but i dont know how

elaohu

i download TIF's ruby code, it works perfect for the green and red axis, but

honoluludesktop

Latecomers wild guess. Do you need SU to be in "parallel projection view"?

TIG

@elaohu said:

in addition to what i mentioned, the ruby file by Tif, the red and green lines are right, but the vertical blue line is wrong (the view is wrong), but i dont know how to fix that???? anybody??
just need to change the vertical view in axo like the one in iso in the code, but i dont know how

Please explain how it is 'wrong' - a screen-shot could help...

smhbrv

I did it. Thank you
But Only, axo3060 and iso3030 view ?
Can we make more choice ?
Axo4545 etc... ?