[Plugin][$] RoundCorner - v3.4a - 31 Mar 24

Tikva2

Ok

http://depositfiles.com/files/au8d700qi

Archiblog

Thank you for this very useful plugin.

fredo6

@tikva2 said:

Ok

http://depositfiles.com/files/au8d700qi

I cannot download the file.
Could you attach it to your answer (via upload attachment)

Thanks very much

Fredo

Tikva2

@unknownuser said:

@tikva2 said:

Ok

http://depositfiles.com/files/au8d700qi

I cannot download the file.
Could you attach it to your answer (via upload attachment)

Thanks very much

Fredo

Here it is)

thanks a lot

123.skp

fredo6

Tikva,

I had a look at the model and now understand what happens.

The offset border (in green) on the large face must cross an edge which is contiguous to the main edge (in red) at its extremity in order to be prolonged.

This is the case if the offset is small enough:

RdC - Edge termination 1.jpg
However, if the offset is larger, then there is NO intersection of the green border with an edge which is contiguous to the red edge you want to round. In this case, RoundCorner simply defaults to terminating the offset border at the orthogonal projection of the edge to round.

RdC - Edge termination 2.jpg
I can try to do something about it, but anyway, it will create problems on the shape which have no easy solution.

You may want to redraw the shaping so that you arrange the first edge on the curved part is longer than the offset.

As an alternative, you can try to use Subdivide and Smooth, which operates on a different approach and is less sensitive to the geometry of edge and faces.

Fredo

Tikva2

ok,I understand))
thank you very much for this plugin)))

shredder7753

how can i download? it says i dont have the permissions?

inna.newyork

i downloaded all per instruction,restarted computer, but my sketchup( pro6) says can't find those two plugins! what's wrong????

fredo6

@inna.newyork said:

i downloaded all per instruction,restarted computer, but my sketchup( pro6) says can't find those two plugins! what's wrong????

Did you download LibFredo6 and follow the instructions which are in the main post (in particular about the unzip operation)?

Fredo

Tamp

thanks a lot, it's really be usefull.

Neocene

Hi there. I've had no problem installing you other great plugins. However I can't get the round corners to work. The icon shows up in the menus but when I try to click on a surface, nothing happens. I've followed your instructions in installing but I can't figure out what I'm doing wrong.

Rich O Brien

You have the current LibFredo installed?

You unzipped the correct files/folders into the plugins directory?

Neocene

yes I have. All the other plug ins work fine with no problems.
Here are the errors that are showing up in the ruby script

Error; #<Errno;;EACCES; Permission denied - E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/FredoTraceRoundCorner.txt>
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Algo.rb;2197;in `initialize'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Algo.rb;2197;in `open'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Algo.rb;2197;in `create_file'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Algo.rb;2210;in `trace'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Tool.rb;58;in `initialize'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Tool.rb;42;in `new'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Tool.rb;42;in `launch'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Tool.rb;33;in `action__mapping'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/LIBFREDO6_Dir_37/Lib6Plugin.rb;118;in `call'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/LIBFREDO6_Dir_37/Lib6Plugin.rb;118;in `launch_action'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/bootstrap_RoundCorner.rb;143;in `launch_action'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/bootstrap_RoundCorner.rb;159;in `startup'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/LIBFREDO6_Dir_37/Lib6Plugin.rb;679;in `call'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/LIBFREDO6_Dir_37/Lib6Plugin.rb;679;in `command_invoke'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/LIBFREDO6_Dir_37/Lib6Plugin.rb;661;in `build_config_commands'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/LIBFREDO6_Dir_37/Lib6Traductor.rb;908;in `call'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/LIBFREDO6_Dir_37/Lib6Traductor.rb;908;in `add_command'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Algo.rb;2197;in `call'
E;/Program Files (x86)/Google/Google SketchUp 8/Plugins/ROUNDCORNER_Dir_22/RoundCorner_Algo.rb;2197

fredo6

Neocene,

Could you install the version 2.2c.
Normally it does not log traces to file.
Apparently, you have some access restriction for creating files by program in your Program directory.

Fredo

Neocene

I have downloaded that version before and get the same problem. How can I change the access for the program?

fredo6

@neocene said:

I have downloaded that version before and get the same problem. How can I change the access for the program?

In file RoundCorner_Algo.rb, can you check that on line 2190, you have
@@mode_on = false

Fredo

chronikle

Please explain to me why did I just waste 2minutes registering just to find out that I don't have the necessary permissions to download even as a registered user.

Gaieus

You should be able to download it with no issues. Please, make sure you have cookies properly enabled and if you are using an url like http://www.sketchucation.com/forums/scf, please, change to http://forums.sketchucation.com

When we are at it; are you sure you have SketchUp version 1? As such, you could not use plugins anyway (they were introduced at version 4). If you have anything later, please, correct your profile here.

chronikle

I am using version 8, I was in a hurry to get the plugin since I was on a deadline and needed a quick way to achieve rounded corners. In regards to the cookies and url, those are not the cause of my problem both are enabled and displaying normally. Any other ideas, can a moderator please pm me the link, I'd still like to use the plugin for future projects.

Gaieus

@chronikle said:

...I was on a deadline and needed a quick way to achieve rounded corners. ...can a moderator please pm me the link, I'd still like to use the plugin for future projects.

See your email. But then come back and let's fix this issue as it should be working fine.