[Plugin] Shape Bender Beta

gr8fzy1

@tig said:

The 'line' you are asked to pick initially needs to be parallel to the Red axis and it should not touch anything else. BUT YOU HAVE IT TOUCHING THE VERY OBJECT THAT YOU WANT TO BEND! It might 'work'... but it will/might give unpredictable results, with no preview before bending!
Your supplied SKP has two lines parallel to the Red axis; ONE of these touches nothing, so it will work! USE THAT.
The length of the 'line' and the 'arc', and the location of them relative to the object that's to be bent will affect the 'bending' - experiment with some different settings...
IT WORKS FOR ME.[attachment=1:gywgvp4p]Capture.PNG[/attachment:gywgvp4p]

See, THAT'S what I don't get. In I did it just like he did in the video. I drew the line right from one end of the component to the other: Just like he did on his demonstration ramp. But here you are telling me to use the dummy line I created?

I've tried doing it like you suggested. I select the component, click the shape bender Icon, and it asks me to "Please select a single line that lies on the Red Axis". But then it won't let me click on the separate line. And then when I try to select them like he did in the video (Select the line, Select the component, click Shape bender) I get this error message:

[attachment=0:gywgvp4p]Shape Bender 3.png[/attachment:gywgvp4p]

Perhaps it is clashing with another plug in...should I provide a screen shot with my plugins list?

@tig said:

gr8fzy1
Incidentally, please 'purge' SKPs before attaching them.
Model Info > Statistics > Purge Unused... OR my Purge-Tool
The original in 2.55Mb but purged it's only 28kb !
You must have had some complex components and materials unused?
Here's what was not needed in the posted SKP:

C:/Users/TIG/Desktop/Shape Bender test-PurgeLog.txt

Purged Unused...

Components: 8
Component#3
Component#2
light-point-2
ivyleaf_3
ivyleaf_2
ivyleaf_1
Component#1
Susan

Layers: 0

Materials: 12
black
<Beige>1
Color_B24
<LightGray>
0135_DarkGray
96,96,96
jean blue
<Charcoal>
efeu1
Color_F12#1
Ivy2d#1
Ivy_stem

Styles: 0

#EOF

And as for purging my SKP, I have no idea where those textures and such came from! I didn't import any components or even USE the bucket tool. Just rectangle, pencil, arch and push/pull! SKP is now purged.

How do you get that purge log?

Error Message.

TIG

You select the group/component.
Run the tool.
Select the Line.
Select the Curve.
Adjust the start/end if desired
Enter to get the bent clone.
...
If the Line touches any other geometry it will fail.
If the Line touches the group/component you probably won't get a preview of the bent form.
The Clone will be offset from the Curve by the same amount as the original is offset from the Line.
...
The error message you show suggests you have the group/component select AND a Line [or two] when you start the tool BUT you must have only the one thing - a group or a component-instance... THEN run the tool, then pick the Line... then pick the Curve...
...
Have you moved all of the parts to one axes' quadrant to be doubly sure ?
Run it with the Ruby Console open and report any error messages you get.
...
What other scripts do you have loading?
...
The Purge log is an option from my Purge script - see the Plugins Index...
...

Chris Fullmer

Also, is there any chance you changed the model's axis, or the axis of the template so that it always loads skewed?

Try tight clicking on the axis and if there is an option to "Reset" then click, it and that will set your axis back to the world axis, and shape bender only works on the world axis.

gr8fzy1

@tig said:

You select the group/component.
Run the tool.
Select the Line.
Select the Curve.
Adjust the start/end if desired
Enter to get the bent clone.

What other scripts do you have loading?

Run it with the Ruby Console open and report any error messages you get.

That's just it. I can do the first to steps no problem. But then when I get to the part to select the line, it won't let me....I can click on that line forever, but nothing will happen. Also, I don't have that horizontal line under my mouse cursor like it shows in the videos.

What do you mean by having other scripts loading? I'm only using Shape bender at the time, no others.

I ran it with the ruby window open and I get this message:
Error: #<TypeError: can't convert nil into String>
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:161:in create_cursor' C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:161:in make_cursors'
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:131:in activate' C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:1017:in select_tool'
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:1017
Error: #<TypeError: no implicit conversion from nil to integer>
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:168:in set_cursor' C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:168:in onSetCursor'
Error: #<TypeError: no implicit conversion from nil to integer>
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:168:in set_cursor' C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:168:in onSetCursor'
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:176:in `onMouseMove'
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_shape_bender.rb:168

When ever I click on the line or move the mouse, it keeps repeating errors 2 and 3 over and over again.

@chris fullmer said:

Also, is there any chance you changed the model's axis, or the axis of the template so that it always loads skewed?

Try right clicking on the axis and if there is an option to "Reset" then click, it and that will set your axis back to the world axis, and shape bender only works on the world axis.

When I learned that the items were supposed to be drawn on the red axis, I DID rotate the model and the curve, but I didn't alter the axis. To be sure that that wasn't the problem, I made a new model drawn completely on the red axis, curve and all. No rotation. It's still not working. And don't worry TIG, I purged this one...:pNew model arch, from the ground up. Same results.

Dave R

I have to believe it's an install error or a conflicting plugin. It worked for me with no problems.

Have you tried removing all non-native plugins from the directory other than Shape Bender and Progressbar.rb?

Arch%20Test%202.skp

TIG

OK!! now we have these errors it's clear that you haven't installed the tool properly when they were extracted from the zipped set.
When you install it you need its main file clf_shape_bender_loader.rb file in the Plugins folder.
You also need a subfolder within Plugins named 'clf_shape_bender', containing these files: You will also need progressbar.rb in Plugins - that is available from http://www.Smustard.com

Dave R

No! Progressbar.rb should be in the Plugins directory.

gr8fzy1

@tig said:

OK!! now we have these errors it's clear that you haven't installed the tool properly when they were extracted from the zipped set.
When you install it you need its main file clf_shape_bender_loader.rb file in the Plugins folder.
You also need a subfolder within Plugins named 'clf_shape_bender', containing these files: [attachment=1:gu9q4ffr]Capture.PNG[/attachment:gu9q4ffr] You will also need progressbar.rb in Plugins - that is available from http://www.Smustard.com

The first time I ran it, it SAID that I needed the progressbar.rb, so I already downloaded that and installed it.

Well, after a little trial and error with the shape bender subfolder (I had put the loader.rb in there as well, so the shape bender wouldn't load. ^////^) I tried it out and it WORKED!

[attachment=0:gu9q4ffr]Shape Bender 4.png[/attachment:gu9q4ffr]

Thank you for the help everyone! And you too TIG, for the clues on PURGING. I had some files that were almost 6MB that purged down to only 900K.

YAY!

gr8fzy1

@dave r said:

No! Progressbar.rb should be in the Plugins directory.

I know, I already fixed that.

jorge2011

is possible for the next version add the feature to adapt to surfaces?

silviac918

Hey,

It's a very powerful tool. However, I tried to do a vertical 3D text along a curve wall. It always stop at the message " 1% End @? (1 of 5) Searching for objects to explode. Do you know what the problem is? really hope this could work. Thanks.

Silvia

TIG

It's probably not 'stopped', but just taking ages to complete.
Can you rotate the parts onto the red/X-axis ?
It might speed things up...

Chris Fullmer

Though that 1%END@? looks suspicious. Can you upload the model?

Xorthan

Hi there.
I started using SketchUp on my Mac.
I downloaded ShapeBender, as well as ProgressBar, and put both in my Plugins folder.
I restarted SketchUp, and don't find a ProgressBar like in your video... is that because I'm using a Mac? Is there someone here who has an idea what I'm doing wrong?

Gaieus

Progressbar is just a plugin which is use by other plugins (like ShapeBender for instance). You will have to activate SB (I think) under SketchUp > Preferences > Extensions then restart SU and find it toolbar button where they are on the Mac (on Windows, they are under the View menu but I know Mac is different here)

Xorthan

@gaieus said:

Progressbar is just a plugin which is use by other plugins (like ShapeBender for instance). You will have to activate SB (I think) under SketchUp > Preferences > Extensions then restart SU and find it toolbar button where they are on the Mac (on Windows, they are under the View menu but I know Mac is different here)

Thanks for the reply; I went to SketchUp > Preferences > Extensions, and didn't see anything about ShapeBender there, the only extension that wasn't checked was Ruby Script Examples, which I checked, but I still don't have a status bar or he bender button from the video...

Any other ideas?

Gaieus

Hm. It should be there - unless Chris programmed it differently for Mac (which I doubt)

Have you unpackedthe content of that zip file? Simply copying it to your Plugins folder will not install the plugin. See some instructions/guidelines below
http://forums.sketchucation.com/viewtopic.php?f=323&t=35746

Dave R

The Shape Bender extension swill show on Mac in Preferences>Extensions as it does on a windows machine. It sounds to me as if you didn't unpack the Shape Bender file or didn't unpack it correctly.

Xorthan

@dave r said:

The Shape Bender extension swill show on Mac in Preferences>Extensions as it does on a windows machine. It sounds to me as if you didn't unpack the Shape Bender file or didn't unpack it correctly.

Okay, maybe I didn't see Shape Bender in the Extensions list before... I see it now. And it's checked. I also have the Progress Bar downloaded, and progressbar.rb is in my plugins folder. I still don't have a progress bar in SketchUp...

I tried moving progressbar.rb to the plugins > utilities, just to see what would happen, but when I opened up SketchUp is gave me a warning, so I moved to back to plugins, and got no warning, but also no icon that looks anything like the video. ??

Gaieus

You will only see a small progress bar running at the bottom of your window when ShapeBender is working - that1s all it's needed for so there is no menu item or button for it, it is just a background plugin in this case. Have you looked at your toolbars to see if the ShapeBender icon is there?