[Plugin Library] LibFredo6 - v15.4d - 14 Aug 25

Dave R

I've seen the same sort of message in the past. The solution that worked for me was to go to the Plugins folder and delete the LibFredo6 files including the folders. Then reinstall the fresh version from the Pluginstore.

Evidently, some file wasn't getting overwritten when the newer version was installed over the old.

eozel

@dave r said:

I've seen the same sort of message in the past. The solution that worked for me was to go to the Plugins folder and delete the LibFredo6 files including the folders. Then reinstall the fresh version from the Pluginstore.

Evidently, some file wasn't getting overwritten when the newer version was installed over the old.

Thanks but I try to it more than 2 times, additionally i uninstalled sketchup and delete all files related with it. My problem comes from asci chracter of computer username. With new update of libfredo 6, libfredo 6 settings has been seen under windows menu. But plugings gives error whicg i said before msg.

Additionally, another computer of mine (which hasn't got asci chracter of username) which i use libfredo 6 and most of plugins. But when i install shapes pluging, it start to give load error msg:

Adsız.jpg

Dave R

Uninstalling and reinstalling sketchUp was an unneeded step.

As for the Shapes plugin, where did you get it?

eozel

@dave r said:

Uninstalling and reinstalling sketchUp was an unneeded step.

As for the Shapes plugin, where did you get it?

While other plugings works well for the shapes plugin, it gives load error msg another computer of mine when sketchup is opennig.

Dave R

That didn't answer my question.

Just forget I asked about it.

eozel

@dave r said:

That didn't answer my question.

Just forget I asked about it.

SketchUp Plugins | PluginStore | SketchUcation

SketchUp Plugin and Extension Store by SketchUcation provides free downloads of hundreds of SketchUp extensions and plugins

(sketchucation.com)

fredo6

@eozel,

At the moment, only LibFredo6 and FredoTools has been corrected for the problem of non-ascii characters.

So are you sure you dont find it?

the menu is under Tools > FredoTools
there is a toolbar with a single icon showing F6

Fredo

Dave R

@eozel said:

@dave r said:

That didn't answer my question.

Just forget I asked about it.

SketchUp Plugins | PluginStore | SketchUcation

SketchUp Plugin and Extension Store by SketchUcation provides free downloads of hundreds of SketchUp extensions and plugins

(sketchucation.com)

Try the version from the Extension Warehouse instead.

eozel

@fredo6 said:

@eozel,

At the moment, only LibFredo6 and FredoTools has been corrected for the problem of non-ascii characters.

So are you sure you dont find it?

the menu is under Tools > FredoTools

there is a toolbar with a single icon showing F6

Fredo

There is no fredotools.

Ekran Alıntısı.JPG

fredo6

@eozel,

Could you show a screenshort of the "check For Updates" of LibFredo6.

Also, can you check the footprint of plugins in the SU Plugins directory where you installed.

Thanks

Fredo

eozel

@fredo6 said:

@eozel,

Could you show a screenshort of the "check For Updates" of LibFredo6.

Also, can you check the footprint of plugins in the SU Plugins directory where you installed.

Thanks

Fredo

Ekran Alıntısı.JPG

Ekran Alıntısı1.JPG

fredo6

Eozel,

Thanks. There is also a Trace log utility in the LibFredo6 menu.
Could you check or send me the txt or a snapshot after expanding the list.

Also the date of last check (1 Jan 1970) seems to have a problem. I have to check

Thanks

Fredo

eozel

@fredo6 said:

Eozel,

Thanks. There is also a Trace log utility in the LibFredo6 menu.
Could you check or send me the txt or a snapshot after expanding the list.

Also the date of last check (1 Jan 1970) seems to have a problem. I have to check

Thanks

Fredo

1413369931.22969;Fredo6_!LibFredo6.rb:71: in `log'
DATE / TIME: 2014-10-15 13:45:31 +0300
SKETCHUP VERSION: 14.1.1282
RUBY_PLATFORM: i386-mingw32
LOG FILE: LibFredo6Trace_14_1413369931228.txt

1413369931.22969;Fredo6_!LibFredo6.rb:113: in `startup'
LibFredo6: Starting up Fredo6_!LibFredo6.rb

1413369931.319277;Fredo6_!LibFredo6.rb:265: in `dir_appdata'
Temp Files directory: C:/Users/EMREZE~1/AppData/Local/Temp

1413369931.351414;Fredo6_!LibFredo6.rb:266: in `dir_appdata'
Default Parameters folder: C:/Users/EMREZE~1/AppData/Local/LIBFREDO6_DATA_Dir/DefaultParameters

1413369931.385449;Fredo6_!LibFredo6.rb:173: in `startup'
LibFredo6: Beginning of loading Cycle***+

1413369931.4218082;Fredo6_!LibFredo6.rb:180: in `startup'
LibFredo6 Core: Fredo6_!LibFredo6/Lib6Core.rb successfully loaded

1413369931.5345228;Lib6Core.rb:992: in `load_full_rubies'
LibFredo6 6.2a: Ruby files loaded [69 ms]

1413369931.56119;Lib6Core.rb:921: in `effective_load_part2'
LibFredo6 6.2a: Startup (creating menus and icons) [10 ms]

1413369931.586445;Fredo6_!LibFredo6.rb:189: in `startup'
LibFredo6: End of loading Cycle***-

1413369938.4396129;Lib6Plugin.rb:150: in `load_body'
Lib6PluginDialogs.rb: Loading body code from body_Lib6PluginDialogs.rb [33 ms]

1413369938.539354;Lib6Core.rb:85: in `use_single_library'
Lib6G6.rb: Loading body code from body_Lib6G6.rb [80 ms]

1413369938.580538;Lib6Core.rb:85: in `use_single_library'
Lib6Translate.rb: Loading body code from body_Lib6Translate.rb [20 ms]

1413369938.621686;Lib6Core.rb:85: in `use_single_library'
Lib6Spline.rb: Loading body code from body_Lib6Spline.rb [20 ms]

1413369938.673656;Lib6Core.rb:85: in `use_single_library'
Lib6WebHtml.rb: Loading body code from body_Lib6WebHtml.rb [30 ms]

1413369938.770474;Lib6Core.rb:85: in `use_single_library'
Lib6Tool.rb: Loading body code from body_Lib6Tool.rb [77 ms]

1413369938.835396;Lib6Core.rb:85: in `use_single_library'
Lib6Algo.rb: Loading body code from body_Lib6Algo.rb [40 ms]

1413369938.882689;Lib6Core.rb:85: in `use_single_library'
Lib6Contour.rb: Loading body code from body_Lib6Contour.rb [23 ms]

1413369938.916536;Lib6Core.rb:85: in `use_single_library'
Lib6Offset3d.rb: Loading body code from body_Lib6Offset3d.rb [15 ms]

1413369938.9848142;Lib6Core.rb:85: in `use_single_library'
Lib6Transform.rb: Loading body code from body_Lib6Transform.rb [49 ms]

1413369939.032744;Lib6Core.rb:85: in `use_single_library'
Lib6Mark.rb: Loading body code from body_Lib6Mark.rb [22 ms]

1413369939.0687091;Lib6Plugin.rb:150: in `load_body'
Lib6WebJS.rb: Loading body code from body_Lib6WebJS.rb [17 ms]

1413369939.1184819;Lib6Plugin.rb:150: in `load_body'
Lib6WebWdlg.rb: Loading body code from body_Lib6WebWdlg.rb [25 ms]

1413369939.164896;Lib6Plugin.rb:150: in `load_body'
Lib6WebXTable.rb: Loading body code from body_Lib6WebXTable.rb [25 ms]

Ekran Alıntısı.JPG

fredo6

Very strange.

Could you do 2 things:

Type the following commands in the RubyConsole and tell me the result
LibFredo6.sudir
LibFredo6.path
LibFredo6.folder
LibFredo6.appdata_dir
LibFredo6.defparam_dir
defined?(FredoTools)
Remove the Fredo6_Fredotools.rb file (it is of no use actually, just for EWH compliance), exit and restart SU and see if you see FredoTools now

Thanks and sorry for these problems. You support is helpful

Fredo

eozel

@fredo6 said:

Very strange.

Could you do 2 things:

Type the following commands in the RubyConsole and tell me the result
LibFredo6.sudir
LibFredo6.path
LibFredo6.folder
LibFredo6.appdata_dir
LibFredo6.defparam_dir
defined?(FredoTools)

Remove the Fredo6_Fredotools.rb file (it is of no use actually, just for EWH compliance), exit and restart SU and see if you see FredoTools now

Thanks and sorry for these problems. You support is helpful

Fredo

LibFredo6.sudir
C:/Users/emre özel/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins
LibFredo6.path
C:/Users/emre özel/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/Fredo6_!LibFredo6
LibFredo6.folder
Fredo6_!LibFredo6
LibFredo6.appdata_dir
C:/Users/EMREZE~1/AppData/Local/LIBFREDO6_DATA_Dir
LibFredo6.defparam_dir
C:/Users/EMREZE~1/AppData/Local/LIBFREDO6_DATA_Dir/DefaultParameters
defined?(FredoTools)
nil

I removed Fredo6_Fredotools.rb file, exited and restarted SU. But there is not fredotools.

I think there is another problem on my pc or windows settings, etc.

Thanks for your supports

fredo6

Thanks.

Could you show the footprint of the Fredo6_FredoTools folder. You may simply have a file missing (with extension .plugin).

Fredo

eozel

@fredo6 said:

Thanks.

Could you show the footprint of the Fredo6_FredoTools folder. You may simply have a file missing (with extension .plugin).

Fredo

Ekran Alıntısı.JPG

fredo6

Eozel,

I think I found the problem.

To be sure, could you copy the attached file into the Fredo6!_LibFredo6 subfolder and restart SU
Lib6Core.rb

Thanks in advance

Fredo

eozel

@fredo6 said:

Eozel,

I think I found the problem.

To be sure, could you copy the attached file into the Fredo6!_LibFredo6 subfolder and restart SU
[attachment=2:3s9bb5jv]Lib6Core.rb[/attachment:3s9bb5jv]

Thanks in advance

Fredo

Fredotools now can ben seen in tools menu:)).

After than i install roundcorner it is working too but when opening the SU it give error below.

Then i install Su draw parametric shape 2.27 but it gives error too which is given below. Error Loading File C:/Users/emre özel/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/jwm_shapes/shapes.rb
Error: cannot load such file -- C:/Users/emre özel/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/jwm_shapes/parametric.rb
C:/Program Files (x86)/SketchUp/SketchUp 2014/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb:45:in require' C:/Program Files (x86)/SketchUp/SketchUp 2014/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb:45:in require'
C:/Users/emre özel/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/jwm_shapes/shapes.rb:8:in <top (required)>' C:/Program Files (x86)/SketchUp/SketchUp 2014/Tools/extensions.rb:197:in require'
C:/Program Files (x86)/SketchUp/SketchUp 2014/Tools/extensions.rb:197:in load' C:/Users/emre özel/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/jwm_shapes.rb:24:in register_extension'
C:/Users/emre özel/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/jwm_shapes.rb:24:in <module:Shapes>' C:/Users/emre özel/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/jwm_shapes.rb:12:in module:JWM'
C:/Users/emre özel/AppData/Roaming/SketchUp/SketchUp 2014/SketchUp/Plugins/jwm_shapes.rb:11:in `<top (required)>'

Curviloft gives errors too.

Ekran Alıntısı.JPG

Ekran Alıntıs1ı.JPG

fredo6

Eozel,

Thanks very much. We are progressing

for Parametric shapes, this can be a similar problem with non-ascii characters, but that's not a plugin of mine
For RoundCorner and possibly Curviloft, could you replace the following files in the SU Plugins directory
Fredo6_RoundCorner.rb Fredo6_Curviloft.rb
For Curviloft, there may be an additional problem.

Anyway, once this is solved, I will republish the scripts.

Thanks again

Fredo