Construction & Working Drawings - Discussion
-
Dave, that looks really nice. Any chance of posting it as a higher res PDF. Would be interested to know the workflow for the table. I haven't done anything with tables yet, and pulling data from SketchUp.
-
Thank you David,
I shouldn't post higher res images due to copyright restrictions. I don't hold the copyright on it.
The workflow basically consists of drawing the complete model, making a number of scenes showing the various parts, adding some dimensions where needed and then sending it off to Layout. The callouts are all added in Layout. Body text is imported from a saved RTF file. The table on the last sheet was created from a cutlist exported out of SketchUp. I massaged the table in Excel, copied it to Word and converted from table to text and then copied it to Layout. sounds bad but it goes very quickly.
-
Is this concept DEAD?
I really can see the value of designing, modeling and illustrating how things are to be built in 3d rather than 2d.
I see the value in creating "live, linked" models that can be viewed, modified, "taken apart" and rendered via SketchUp / LayOut / Google Earth.
And I see a lot of "missing links" to tie these concept to real world needs like working drawings, drawing documentation, building permit plans, details, door and window schedules, etc.I see the value in a "semi-open source" software app, like SU, where there are lots of independent developers working on unique, specific supportive plugins/applications that make the software, much more vibrant, and adaptive and alive.
Initially I felt that SU could be / do that. Maybe now is just too early in the software application / development / intention.I tried to do working drawings, construction docs in SU/LO, lots of hours and ended up with a lot of frustrations and the realization that maybe I was trying to do something the hard way. Maybe I have a zebra at a horse race.
I also don't see Google interested in supporting this concept/potential for SU/LO. In my searching I find only a few people actually doing working drawings/construction docs, and those that are doing them are only doing small scale projects, i.e. kitchen bath remodel in SU/LO.
I am on a Mac, but it seems, that those I have talked to are doing what I need much more efficiently on software like Chief Architect.any insights or perspectives would be most appreciated.
aloha
red -
I would like to see more support for working drawings in LO. I am on a Mac, running XP in Bootcamp. I am about to begin a small renovation project and plan on using SU and LO exclusively. I will try and post my progress and maybe get some help/feedback that could be useful to others trying the same thing.
-
I don't think this concept is dead, Red.
I'm still make construction and working drawings in Layout. I just finished one this morning in fact as well as another one yesterday. Here are some image exports from this morning's project. I realize this isn't the same as con docs for buildings.
And I made full size patterns for cutting out the hard parts.
-
Hello, Sorry I didn't check out this conversation earlier.
I am a SketchUp fanatic, architect and registered Google SketchUp Trainer.
I don't use CAD, but I use SketchUp to do all of my construction drawings. So far, I have carried out a commercial project worth roughly $1m, and a complicated house construction cost €0.5m without using CAD or any other type of software.
Please check out this link to a video showing some of the work I have done http://www.youtube.com/watch?v=8jw-q409XZc
Here is a link to some further images showing my working drawings along with random photos of the built projects: http://picasaweb.google.com/sketchupireland/ViewsionAspireArchitecturePortfolioDrawings02?feat=directlink
We have a Google SketchUp ATC company called viewsion: http://www.viewsion.ie, and we have the world's first advanced training program for SketchUp users that shows how to create the type of drawings illustrated above. (I hope you don't mind the plug. It's the only one I'll submit here.)
Please let us know what you think. We would love to get to the bottom of this debate about SketchUp because we think it is the ultimate future for this amazing software.
-
I've also used SUPro & LO to prepare drawings for several projects including furniture, engineering parts and even my new house. I'm sure there are parts of the work that more expensive software can do better (sections and detail views come to mind) but having looked a few other packages I really can't say I like the UIs.
It would be nice if SU did the equivalent of the 'Add Section-Cut Face' plugin automatically as cuts happened. It would be nice to be able to set a suitable pattern for the cut-face to show the materials. I guess it would be nice if SU actually behaved as a solid modeller when you have a solid item.
It would be nice if LO could do the dimensioning and if the labels and texts in LO could attach to locations in the SU model so that altering the view didn't mess up the placement of said labels and texts.
But despite the above I managed to produce a precisely drawn model of a house, make dimensioned views of it, provide a variety of sectional views, several detail sub-views, annotate it all, put it together and build myself a pretty comprehensive set of plans. I'd provide a copy for perusal if I could find a way to persuade this damn forum to accept my file....
-
@unknownuser said:
How to generate a complete set of graphical information needed for building from a Sketchup model
Not the only way of course but have any of you (apart from Red who I know has) considered what is put forward in this topic?
I would be very interested in your views.
My regards
Chris
-
@tim said:
I'd provide a copy for perusal if I could find a way to persuade this damn forum to accept my file...
What's the problem with the forum and the file? (**.layout* IS an allowed file format)
-
Ashling Rd Layout.pdf
@gaieus said:@tim said:
I'd provide a copy for perusal if I could find a way to persuade this damn forum to accept my file...
What's the problem with the forum and the file? (**.layout* IS an allowed file format)
I simply can't get the file (a pdf in this case) to upload. I can choose the file, I press the 'add the file' button and..... wait....wait.....wait.....wait.... give up after an hour or so. Of course, if I try now it will work immediately, so here goes -Ashling Rd Layout.pdf
Yup. Of course. -
@tim said:
if I try now it will work immediately, so here goes
Such is life! But now we can see the file, I would find it useful to know what difference Layout makes to what I see as a pretty straightforward set of SU views (title blocks aside)?
Thanks
Chris
-
Tim,
These could not have been easy to make. What would you do differently next time? what gave you the most challenge? -
What difference does LO make ?
Well, it allows the detail views to be shown without having to see the whole model - see pages 9 & 10 for example.
It allows for annotations about details and labeling of parts of the views.
It allows for fitting several related views together on a page ready for printing. Can't do that from SU directly.
It produces a nicely organised PDF file I can share with my contractors or have printed full-size.
It allows generally understood markup for detail views - see page 9 upper right view where two details are called out and referred on the same page.By and large most people wouldn't appreciate getting an SU file and the instruction 'open this and build a house from it'. This may change in the future but right now it is a treat to find contractors that even use email.
What would I do differently? Be more organised about layers and components from the start; I did fairly well and didn't have to mess around too much but I'm sure I could do better.
-
Thanks Tim very useful. And I noted your points.
Chris
-
I made a "feature request" a while ago to enable creating and embedding 3D PDF version of the model (or its selected parts) into the PDF document. Imagine that you have these nice, detailed/labelled pages in LO that are practically "just" printable, 2D data but on certain pages you even allow a client to see the model in 3D and allow him/her to orbit/pan around.
This is possible with LO when you are using the presentation view but once you export into PDF, it "freezes" to that certain view and you cannot move around any more.
Another useful feature would be to allow LO users to embed flash videos (now also possible with PDF 9). This could go both into presentation as well as PDF export.
Of course, both features would be "lost" when you print the file on paper but as long as you are watching it on your computer, they would remain interactive.
-
@gaieus said:
Another useful feature would be to allow LO users to embed flash videos
How about a little electronic notebook for SU users to make videos (individual objects in each scene could be animated)?
Inshala!
-
Chris,
I was just thinking about this today,
why not an informed "animation" that can show not only how a building is to be built, but one that can be information rich, i.e. click on a component and there is a "nameset" link to it...
with the ability to add comments, input, feedback etc.
a "live building process".
much like warfare, the "plan is out the window as soon as the first bullet is fired, same I find in construction" (all be it a little less so, still there is job site scrambling, particularly with a involved creative owner, and or a tight budget.
aloha
red -
@redinhawaii said:
why not an informed "animation" that can show not only how a building is to be built, but one that can be information rich, i.e. click on a component and there is a "nameset" link to it...
with the ability to add comments, input, feedback etc.Insofar as I understand it, dynamic components provide for some of this. You can add attributes that will be seen in the relevant dialogue, apparently including URLs. I've not had time to even attempt any DC work but it certainly sounds useful.
One thing I am going to be trying in the next few days is making a build animation to show the stages of building the house since it isn't quite the usual sequence.
-
@fionmacool said:
Hello, Sorry I didn't check out this conversation earlier.
I am a SketchUp fanatic, architect and registered Google SketchUp Trainer.
I don't use CAD, but I use SketchUp to do all of my construction drawings. So far, I have carried out a commercial project worth roughly $1m, and a complicated house construction cost €0.5m without using CAD or any other type of software.
Please check out this link to a video showing some of the work I have done http://www.youtube.com/watch?v=8jw-q409XZc
Here is a link to some further images showing my working drawings along with random photos of the built projects: http://picasaweb.google.com/sketchupireland/ViewsionAspireArchitecturePortfolioDrawings02?feat=directlink
We have a Google SketchUp ATC company called viewsion: http://www.viewsion.ie, and we have the world's first advanced training program for SketchUp users that shows how to create the type of drawings illustrated above. (I hope you don't mind the plug. It's the only one I'll submit here.)
Please let us know what you think. We would love to get to the bottom of this debate about SketchUp because we think it is the ultimate future for this amazing software.
Hello Paul,
I'm very very impressed by some of those images of final drawing that you have linked to. Where these created solely in SketchUp? I'm finding layout extremely frustrating/slow/basic??? Also the PDF export seems to create massive 26Mb files from a simple model. The only way I could find to create a (basic) A1 PDF of a model was to export as a jpg, and then print the jpg to a PDF printer I have installed. This got the same 26Mb Outlay PDF file down to 1.5Mb and both PDF files look exactly the same "poor" quality. (see attached PDF file, Hopefully!)
I would love to use SketchUp as my everyday design/draft tool, but at the end of the day it's all about the end product and at present AutoCAD lets me do everything I need. I only ever design in 2D and only do 3D when a client has a fancy for it.
But if all those drawings where created solely in SketchUp I would love to jump ship and learn more of your techniques and tips etc.
Gaz...
-
Hi all,
I have been following this topic with great interest. The more I use LO the more I see potential to produce Detail design drawings.Still no where near the power of Revit but for my purposes where I simply need to produce a set of preliminary drawings that can be reasonably priced, its a godsend. Attached is a PDF of some half complete motel concept plans. Still experimenting with the scrapbook function but things are starting to come together.
Stan
Advertisement