Plugin SJ Add DC Attribut

simjoubert

Hello
Publication d'une version corrective

Dernière version sj Add DC Attribute 0.3.1 MAJ du 12/09/2022

Lien de téléchargement :https://www.sketchup.simjoubert.com/my-plugins/sj-add-dc-attribute.html
ou sur le PluginStore https://sketchucation.com/plugin/2537-sjadddcattribute

**Notes de versions : **

V.0.3.1 2022/09/12

Correction d'affichage des longues listes dans la fenêtre d'import CSV qui obligeaient à scroller la fenêtre modale.
Correction d'affichage des longues listes d'options qui masquait les boutons dans certain cas.
Correction du remplissage du formulaire après avoir sélectionné un attribut dans les listes.
Les unités par défaut pour les longueurs sont définies selon l'unité du modèle.

JIA6598

Thanks for the useful program. When I add the attribute, the group rotates 90 degrees

JIA6598

Thanks for the useful program. When I add the attribute, the group rotates 90 degrees

JIA6598

Addition inverts the group

JIA6598

Addition inverts the group

simjoubert

@jia6598 said:

Thanks for the useful program. When I add the attribute, the group rotates 90 degrees

Hello,
If the rotation is abnormal, tell me more!
To find out if it's a bug and if it can be reproduced!
Please attach your model as an attachment. And if it's confidential, you can send me a download link, WeTransfer or similar in private message.
Have a good day

JIA6598

@simjoubert said:

@jia6598 said:

Thanks for the useful program. When I add the attribute, the group rotates 90 degrees

Hello,
If the rotation is abnormal, tell me more!
To find out if it's a bug and if it can be reproduced!
Please attach your model as an attachment. And if it's confidential, you can send me a download link, WeTransfer or similar in private message.
Have a good day

Hey
I use Profile Builder 3

I draw the element in the direction of the red line
I cut the element with the section tool
After that, I use Add DC to add an attribute
The element turns, in the direction of the green line.

But
... If I draw the PB3 element in the direction of the green line, the element does not rotate.

But ++
I normally draw a group or component
The program works flawlessly

The program is useful and I found many uses for it.
I hope there is a solution to this

thank you

simjoubert

@jia6598 said:

@simjoubert said:

@jia6598 said:

Thanks for the useful program. When I add the attribute, the group rotates 90 degrees

Hello,
If the rotation is abnormal, tell me more!
To find out if it's a bug and if it can be reproduced!
Please attach your model as an attachment. And if it's confidential, you can send me a download link, WeTransfer or similar in private message.
Have a good day

Hey
I use Profile Builder 3

I draw the element in the direction of the red line

I cut the element with the section tool

After that, I use Add DC to add an attribute

The element turns, in the direction of the green line.

But
... If I draw the PB3 element in the direction of the green line, the element does not rotate.

But ++
I normally draw a group or component
The program works flawlessly

The program is useful and I found many uses for it.
I hope there is a solution to this

thank you

Good evening,
Thank you for this additional information.
I will try to reproduce this bug, and fix it quickly.
Glad to read that you find many uses for the plugin.
Do not hesitate to like the plugin in the plugin store and on my page.

simjoubert

Hello
Publication of a corrective version

last version SJ Add DC Attribute 0.3.2 MAJ of 25/09/2022

Download link:https://www.sketchup.simjoubert.com/my-plugins/sj-add-dc-attribute.html
or on the Plugin Store https://sketchucation.com/plugin/2537-sjadddcattribute

**Release Notes: **

V.0.3.2 2022/09/25
Fixed a bug on the transform that rotated instances, if they didn't have a rotation attribute and were rotated around an axis

pibuz

Hi Simon! I recently discovered you plugin and it's brilliant!!! Thanks a lot!
Although I'd like to suggest you a couple upgrades, to improve usability even more.

First thing, the possibility to save a set of favourite attributes to be used in other skp models. This is very convenient when you have a set of fixed attributes you always want to load for any of your components. Could be useful to name the set so the plugin can load the relative attributes
Second thing: the possibility to add to the selection a set of attributes (the thing we saved at step 1) so that the plugin can import a number of attributes without having to manually select them one by one.

Tell me what you think! Thanks again a lot!

simjoubert

@pibuz said:

Hi Simon! I recently discovered you plugin and it's brilliant!!! Thanks a lot!
Although I'd like to suggest you a couple upgrades, to improve usability even more.

First thing, the possibility to save a set of favourite attributes to be used in other skp models. This is very convenient when you have a set of fixed attributes you always want to load for any of your components. Could be useful to name the set so the plugin can load the relative attributes

Second thing: the possibility to add to the selection a set of attributes (the thing we saved at step 1) so that the plugin can import a number of attributes without having to manually select them one by one.

Tell me what you think! Thanks again a lot!

Hello Pibuz

I am delighted to read that this plugin is useful to you!
Your suggestions join the evolution plan of the plugin for the next major version. With the introduction of group of favorites:

The import-export of its groups.
One-click addition of an attribute group to a selection.

We will have to be a little patient, but this is a reasonable objective.
In the meantime, I'm counting on you to promote the plugin, and buy me a coffee!

Have a nice week end

simjoubert

Hello
Publication of a corrective version

last version SJ Add DC Attribute 0.3.3 MAJ of 24/01/2023

Download link:https://www.sketchup.simjoubert.com/my-plugins/sj-add-dc-attribute.html
or on the Plugin Store https://sketchucation.com/plugin/2537-sjadddcattribute

**Release Notes: **

V.0.3.3 2023/01/24
Fixed a bug that left the progress bar in an endless loop in some cases.

simjoubert

Hello
For those who have downloaded the plugin in version 0.3.3 before 10:15 a.m. on January 24, 2023 (Paris time)
Please download the file again and reinstall it.
A file was missing!
All my excuses !
Simon

andreimd87

very useful addon. but it does not work for me. or maybe i an missing something. i set an atribute NAME and the value. and after aplying there is still nothing in the component atributes.

simjoubert

@andreimd87 said:

very useful addon. but it does not work for me. or maybe i an missing something. i set an atribute NAME and the value. and after aplying there is still nothing in the component attributes.

Good evening
To create a new attribute or edit an existing attribute:
Select an existing attribute in one of the lists (Attribute of a component of the selection, or an attribute placed in favorites, or an attribute of the list to create, modify) or create it from scratch.
Once the values have been entered, it must be added to the list of attributes to create/modify. The attribute appears in the list, in case of duplicate an error message appears asking you for confirmation before overwriting the existing one.
At this point, nothing is changed in the components of the selection. It is only after clicking on the button create the attributes of the list that the components will receive the new attribute or its new values in case of modification. You can thus create several attributes at once.

sebelus13

Salut simjoubert,
i think your plughin is very very good, I will use it for shure,
my wish would be that you add a funktionality not only to add new attributes with new values or strings, but also change existing strings or values in existing attributes, that would be really nice for me.
A second thing would be nice: Add the possibility to assign a sequential number additionaly to the text, perhaps like String&seyuentialnumber---> perhaps EL_1 ...EL_2...EL_3 and so on

Si vous le souhaitez, je peux vous aider à traduire en allemand...
Cordialement
sebelus13