SCFLicense: Extension Licensing on Sketchucation

Gábor

Round corner and FredoCorner work!
JPP works
Curviloft works
TOS works.

Curvizard and FredoScale I activated today also VisuHole and TopoShaper, and they are not working.

Ah, I saw two seats there, I thought might be because there is RoundCorner and FredoCorner.

Could you please release the license one of the not working ones and re-activate, restart SketchUp and try again?

ely862me

Round corner and FredoCorner works
JPP works
Curviloft works
TOS works

Curvizard and FredoScale I activated today. Also VisuHole and TopoShaper, and they are not working.
Something happened from yesterday to today. What I activated today won't work!

Ah, I saw two seats there, I thought might be because there is RoundCorner and FredoCorner.

ely862me

I already did that, it didn't work!

Hey! I don't know what you did but now they seem to work! Yay!

Gábor

@ely862me said:

I already did that, it didn't work!

Hey! I don't know what you did but now they seem to work! Yay!

Good to hear that it is working now. Could everybody with the same problem retry it now?

Gábor

@pep75 said:

Same problem here suddenly..Updated everythingbut still can't get it to work...Everything seems to be fine but everytime I want to use the plugin I got the license message.

Could you please reactivate the not working licenses, restart SketchUp and try to use the affected plugins again?

Gábor

@serje89 said:

I have the same problem like ely862me

Could you please reactivate the not working licenses, restart SketchUp and try to use the affected plugins again and tell us the result?

Serje89

Work without restart. Thx!!!

Gábor

@serje89 said:

Work without restart. Thx!!!

Thank you for getting back with the good news.

ely862me

I released the license I reactivated and restarted Sketchup. Seems to be working!

Gábor

@ely862me said:

I released the license I reactivated and restarted Sketchup. Seems to be working!

Thank you very much for the good news. I hope it will stay so....

Rich O Brien

@ely862me said:

I released the license I reactivated and restarted Sketchup. Seems to be working!

I released the seats I had taken on your licenses for Fredoscale and RoundCorner. Cheers for helping us sort this out

ely862me

Hey, one working one is enough for me !
My pleasure!
Thank you!

numerobis

@rich o brien said:

@numerobis said:

So there must be a permanent connection to the internet?

Not really. Tools will work offline if you validated while online.

Yes, sure... but with the need to connect every 5-7 days, not knowing when exactly, it's almost permanent... I already experienced a non working FredoCorner for several times. Why such a short timeframe and not at least one month like SU?

Rich O Brien

@numerobis said:

Yes, sure... but with the need to connect every 5-7 days, not knowing when exactly, it's almost permanent... I already experienced a non working FredoCorner for several times. Why such a short timeframe and not at least one month like SU?

That's a query for Fredo. I've zero to do with license check frequency. That's the author's decision.

fredo6

Check is once a month, that is, once a month, you need to be connected to the Internet when you launch a plugin, in order to check the license. This is by plugin, so if you have many, the occurrences of check are multiple and not necessarily synchronized.

All this is done to let users manage their seat assignment from the Sketchucation 'MyLicenses' page (a functionality that we will open soon).

numerobis

@fredo6 said:

Check is once a month, that is, once a month, you need to be connected to the Internet when you launch a plugin, in order to check the license.

I only have FredoCorner at the moment and i know that it stops working every few days - not exactly sure about the number of days, but it's definitely not more than a week.

edu_krassuski

Hi, I purchased the 40 dollar pack and was able to activate all plugins but FredoCorner. When I open the license manager it simply does not show the .scflicense for fredocorner. I even tried deleting the License signature as instructed in one of the replies and that only ended up taking an extra seat of my license that now I cannot release (I was only able to release it the second time I did it, so it is currently taking 2 seats of joint push-pull).
Any ideas of what might be happening with FredoCorner and how can I activate it?

I already checked Sketchucation version and it is up to date. I already uninstalled fredocorner and reinstalled to make sure it wasnt a bug or something but without any success.

This is the log:

18-Mar-22 11:45:25;;;JointPushPull;;;validate_success;;;Validation successful on Sketchucation -- License: 34746 (NORMAL) SCF user:
08-Apr-22 10:44:57;;;FredoCorner;;;purchase_request;;;Purchase request at https://sketchucation.com/purchase.php?plugin=FredoCorner
08-Apr-22 10:53:14;;;FredoCorner;;;validation_request_error;;;msg_validation_error

Request to Sketchucation = ERROR_F09
08-Apr-22 11:03:46;;;FredoCorner;;;validation_request_error;;;msg_validation_error

Request to Sketchucation = ERROR_F09
08-Apr-22 11:04:21;;;JointPushPull;;;validate_success;;;Validation successful on Sketchucation -- License: 34746 (NORMAL) SCF user:
08-Apr-22 11:06:00;;;JointPushPull;;;release_success;;;Release successful on Sketchucation -- License: 34746 (NORMAL) SCF user:
08-Apr-22 11:06:40;;;JointPushPull;;;validate_success;;;Validation successful on Sketchucation -- License: 34746 (NORMAL) SCF user:
08-Apr-22 11:14:15;;;Curviloft;;;validate_success;;;Validation successful on Sketchucation -- License: 34747 (NORMAL) SCF user:
08-Apr-22 11:14:47;;;FredoScale;;;validate_success;;;Validation successful on Sketchucation -- License: 34748 (NORMAL) SCF user:
08-Apr-22 11:15:07;;;TopoShaper;;;validate_success;;;Validation successful on Sketchucation -- License: 34749 (NORMAL) SCF user:
08-Apr-22 11:15:34;;;Curvizard;;;validate_success;;;Validation successful on Sketchucation -- License: 34750 (NORMAL) SCF user:
08-Apr-22 11:15:53;;;VisuHole;;;validate_success;;;Validation successful on Sketchucation -- License: 34751 (NORMAL) SCF user:
08-Apr-22 11:17:05;;;ToolsOnSurface;;;validate_success;;;Validation successful on Sketchucation -- License: 34752 (NORMAL) SCF user:

fredo6

@edu_krassuski said:

Hi, I purchased the 40 dollar pack and was able to activate all plugins but FredoCorner. When I open the license manager it simply does not show the .scflicense for fredocorner.

Are you referring to RoundCorner or FredoCorner?

FredoCorner and RoundCorner are different plugins, functionally and for licensing:

RoundCorner is part of the bundle pack
FredoCorner is licensed separately (it has been so for more than a year)

I sent you by email the license file for RoundCorner just in case.

mosyssibal

I bought a basic license because I couldn't be Ruby(curviloft), but why can't I recognize it yet? I'm so angry Hurry up and fix it!

Rich O Brien

@mosyssibal said:

I bought a basic license because I couldn't be Ruby(curviloft), but why can't I recognize it yet? I'm so angry Hurry up and fix it!

What do you mean? You received no license?