[Plugin Library] LibFredo6 - v14.9a - 06 Dec 24

TIG

LibFredo is signed.

You haven't clearly explained how you installed it or the other two Fredo extensions.
Let's start again from the beginning.
You will have downloaded three RBZ files for these extensions.
Use the red-button on the bottom-left of the Extension Manager dialog - visible in your screenshot -
to 'Install Extension'.
Navigate to, and select an RBZ and it'll be auto-installed.
Repeat for the remaining RBZ files.
Restart SketchUp and sync everything.
What does the Extension Manager dialog say now ?
Expand the LibFredo item to see its details... is it the same version as my screenshot ?
It you have incorrectly manually placed files into a location other than your Users/.../Plugins folder it might be causing issues and these should be removed too...

fredo6

NEW RELEASE: LibFredo6 v10.9a - 02 Jul 20

LibFredo6 10.9a fixes a problem with the animation rendering of VRay 4.2 and Animator

Requirements: SU2017 and above

See plugin home page of LibFredo6 for Download of LibFredo6.

Main Post of the LibFredo6 thread

Fredo

fredo6

NEW RELEASE: LibFredo6 v10.8a - 20 Jun 20

LibFredo6 10.8a is a maintenance release, with bug fixing and adjustments mostly for Mac (dialogs)

Requirements: SU2017 and above

See plugin home page of LibFredo6 for Download of LibFredo6.

Main Post of the LibFredo6 thread

Fredo

Ralf Jansen

Hi,
today I regognised that all Fredo6-Plugins are in english (dont know since when).
When open the language it is set to German and all translation Fields are empty.
After changing to another language (e.g. English), and switching back to German, most of the Fields are with german translation (Left to translate: 201 / 605).
But unfortunately all Plugins still in english, even after restarting Sketchup.

I'm using Sketchup2019 Pro.
All Fredo-Plugins are up to date.

Dave R

@ralf jansen said:

I'm using Sketchup2019 Pro.

Perhaps you could update your profile?

I'm just guessing that you haven't made the correct setting in LibFredo6 yet.
Screenshot - 7_8_2020 , 11_23_27 AM.png

Ralf Jansen

@dave r said:

@ralf jansen said:

I'm using Sketchup2019 Pro.

Perhaps you could update your profile?

-> Done

@dave r said:

I'm just guessing that you haven't made the correct setting in LibFredo6 yet.

The config setting of LibFredo6 is "German". But there are no translations...
-> see also bottom line counter

When I switch to english it looks like:

After switching back to german it looks like:

After pressing "Save changes" and restart of Sketchup there are still no translations
-> looks like first attachment

fredo6

Did you set the language with the menu Window > LibFredo6 Settings... > Set Preferred Language

LibFredo6 Set Language.png

The Translation dialog boxes for LibFredo6 and my other plugins are to be used only by translators.

Ralf Jansen

@fredo6 said:

Did you set the language with the menu Window > LibFredo6 Settings... > Set Preferred Language

[attachment=0:3amq512s]LibFredo6 Set Language.png[/attachment:3amq512s]

The Translation dialog boxes for LibFredo6 and my other plugins are to be used only by translators.

Thanks Fredo6! That's fixing my problem
Looks like that I was working with your tools in english since switching to the "pro" Version of Sketchup.
By the way: You are doing a great job. Thanks a lot.

grigorescustelian

Why don't you just keep it to one version? Why do you keep updating forever? It's the same tool.

Dave R

@grigorescustelian said:

Why don't you just keep it to one version? Why do you keep updating forever? It's the same tool.

There are periodic changes to Ruby, additional extensions that require additional or modified support files, and bug fixes. Fredo6 is pretty good about explaining why he updates when he does. You aren't forced to install these updates, however. You can ignore them.

victoriagaylard

Hi Tig,
Sorry it's taken me a while to look at this and come back to you.
I removed everything and started again (and re-watched your install tutorial).
But I'm still having the same problem.
I download the .rbz files onto my desktop, use the Extension Manager to install the files. This part seems to work fine.
I checked my Plug-Ins folder and the Fredo folders appear to be there (see screenshot).
I quit out of SketchUp and when I reopen it, I get this message that the LibFredo6 folder is not in the Plug-Ins folder (see second screenshot).
In the Extension Manager, it's saying your signature is invalid and I notice there are no details for the extensions (version etc).
I'm on a Mac so not sure if that makes a difference?
I am sure I'm following your instructions, but am not sure what to do now?
Thanks in advance for your help.
Victoria

Untitled 5.png

Untitled 4.png

TIG

This is weird.

Perhaps a MAC expert can comment / help.
Clearly the expected file/subfolder seems to be in your Plugins folder.
Perhaps it's a permissions issue preventing SketchUp seeing/reading them ?
Perhaps a MAC-guy can explain how to check the Plugins folder's permissions and ensure the reset trickles down to all its contents too...

Fredo's RBZs are all signed and current, so it should report properly and show its version etc...

For the avoidance of doubt please get the current RBZ and reinstall in.
Restart SketchUp and see what happens...
https://sketchucation.com/pluginstore?pln=LibFredo6

Steve_S

I installed the latest version of - LibFredo6 - v10.9a - 02 jul 20.

SketchUp's extension manager shows it as UNSIGNED.
All of my other plug-ins are all marked SIGNED.

Is it normal for LibFredo6 - v10.9a - 02 jul 20 to be marked as UNSIGNED?
If not, what is the process required to change its state from UNSIGNED to SIGNED?

In advance, thank you for your response.

Dave R

Look at LibFredo6 not top_Libfredo.

It doesn't matter if top_LibFredo isn't signed as long as you leave the loading permissions set to allow it to load.

It should look like this in Extension Manager.
Screenshot - 7_24_2020 , 2_36_37 PM.png

Steve_S

@dave r said:

Look at LibFredo6 not top_Libfredo.

It doesn't matter if top_LibFredo isn't signed as long as you leave the loading permissions set to allow it to load.

It should look like this in Extension Manager.
[attachment=0:1y5ttorh]Screenshot - 7_24_2020 , 2_36_37 PM.png[/attachment:1y5ttorh]

———————————————————————————————————————————————————————————————————————————————————————————

Thank you for your prompt response, Dave. Greatly appreciated.

victoriagaylard

@tig said:

This is weird.

Perhaps a MAC expert can comment / help.
Clearly the expected file/subfolder seems to be in your Plugins folder.
Perhaps it's a permissions issue preventing SketchUp seeing/reading them ?
Perhaps a MAC-guy can explain how to check the Plugins folder's permissions and ensure the reset trickles down to all its contents too...

Fredo's RBZs are all signed and current, so it should report properly and show its version etc...

For the avoidance of doubt please get the current RBZ and reinstall in.
Restart SketchUp and see what happens...
https://sketchucation.com/pluginstore?pln=LibFredo6

Well, this is weird. I've just retried all the steps (I swear I did the same things as last time) and it worked!
Thanks - these will be very helpful tools for my interior design work.

fredo6

NEW RELEASE: LibFredo6 v11.0a - 19 Aug 20

LibFredo6 11.0a provide bug fixing, cosmetic adjustments and technical evolution to a number of my plugins, in particular:

FredoSpline
FredoGuides
FredoGhost
FredoCorner
FredoPortrait

Requirements: SU2017 and above

See plugin home page of LibFredo6 for Download of LibFredo6.

Main Post of the LibFredo6 thread

Fredo

zooen

Hi,

After updating Fredolib (today, latest version) the file mentioned above is systematically blocked by my antivirus and no plugin is loaded.

The start of the error report

Erreur de chargement du fichier Fredo6_!LibFredo6.rb
Error: #<LoadError: 5: Acc\xE8s refus\xE9. - C:/Users/fosse/AppData/Local/Temp/Fredo6_LibFredo6_TemporaryFiles/Binaries/SU20/bin_LibFredo6.so>
C:/Program Files/SketchUp/SketchUp 2020/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb:59:in require' C:/Program Files/SketchUp/SketchUp 2020/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb:59:in require'
c:/users/xxxx/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/top_libfredo6.rbe:622:in load_binary' c:/users/xxxx/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/top_libfredo6.rbe:257:in startup'
C:/Users/xxxx/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/Fredo6_!LibFredo6.rb:61:in process' C:/Users/xxxxx/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/Fredo6_!LibFredo6.rb:68:in module:LibFredo6_Loader'
C:/Users/xxxx/AppData/Roaming/SketchUp/SketchUp 2020/SketchUp/Plugins/Fredo6_!

Si possible échangeons sur le forum fr, merci

Zooen

zooen

RE,

Bon en redémarrant l'ordi tout fonctionne. Donc pas d'explication pour moi. Souvent le fait de redémarrer l'ordi corrige les dysfonctionnements lors de mises à jour de logiciels, mais je n'y avais pas pensé.

Bonne fin de journée, Zooen

azgcz

After upgrading LibFredo6 v11.0a，I can not use "ctrl"key to ctrl "toggle JointPushPull create starting face "in"Joint Push Pull Interactive v4.4e"

If it is a bug,hope to fix it.