Some tips and tricks from out of the Box
-
Click Drag Orientate.
Here's a little trick that people often miss, you can use click and drag to set the axis of rotation for the rotate tool therefore allowing you to effectively mirror things by rotating them 180 degs. Particularly useful when the shape is off axis. I've used it here to make a drone frame and Fredo's Round Corner to smooth it off.
-
Marvelous thread!
If you mix it with this one you have all the power of SU under hands!
-
Never thought of rotating as mirroring (always use tig's mirror for this), nice to know!
Please keep posting -
Dave hit it above - yes, it's great to have this thread as a Collecting Place for your really really good and desired Wisdoms - Box, thanks a lot for this thread and to make and share that at all! -
Here's an oddball one, make an elephants trunk using Thomthom's Truebend.
-
I'll throw this one in as one of the fundamentals.
So many people have trouble rotating to a specific axis.
Try adding a plane on the axis you want to guide your rotations.
Done correctly 3 rotations should be the maximum needed from any position.
-
you are the hero of rotating!
Always nice to see alternative ways of doing things
What I'd instead:- align UCS to face
- copy face
- align UCS to world
- paste
-
You lost me just before 1.
but I caught up at 4.In other words, what on earth are you talking about.
-
The mentioned 4 steps in moving pictures...
("Copy" and "Paste" with shortcuts...)
-
That makes perfect sense Cotty, what ucs is is still beyond my limited language skills.
-
ucs=axes
(Acad heritage) -
Here's a simple one, no plugins, no fancy tricks, just vanilla follow me. This shows why it is useful that follow me on a face removes the face. If it didn't there would be an internal face after the second follow me and it wouldn't form a solid.
-
Keep going Box, great stuff...
-
Another simple no plugin one.
-
Great suspense till the end!
-
Here's a very short one, straight to the point.
To create a radius corner of a specific size, start with the two point arc at any size, move along the edge till you get the magenta inference, click once, move back along that edge until you get the magenta a second time, don't click, let go of the mouse and type the radius you want and hit enter.
-
always I have derived the desired radius with parallel guide lines - ok, it doesn't hurt to have a certain repertoir of geometry skills 
but hey, what would I/you have saved on time - so thanks to show this "hidden" secret !!!!! -
I'm pretty sure Cotty taught me that one.
-
@box said:
Here's a very short one, straight to the point.
To create a radius corner of a specific size, start with the two point arc at any size, move along the edge till you get the magenta inference, click once, move back along that edge until you get the magenta a second time, don't click, let go of the mouse and type the radius you want and hit enter....and since it's arc you can modify the radius in entity info.
-
@gilles said:
...and since it's arc you can modify the radius in entity info.
Or modify it via the cardinal points.
Advertisement