[Plugin][$] FredoCorner - v2.7a - 31 Mar 24

fredo6

NEW RELEASE: FredoCorner v1.1c - 11 Sep 18

FredoCorner 1.1c includes some bug fixing, a full French translation as well as a first partial translation in Chinese by Arc.

Requirement: LibFredo6 8.6d

Please note that:

there are known issues and likely bugs here and there
This concerns in particular Collisions, i.e. when the offset is too large.
Terminal corners (that is ending on a single edge) may present issues and bugs
Variable offset tools are experimental
No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.

Oxer

There is a problem with the Ctrl key modifier on macOS, the Ctrl key on Mac is like a mouse right-click, it appears the Contextual Menu, generally the function assigned to the Ctrl key on Pc is the Alt Key on Mac.
Example: When I'm in selection mode, if I press Alt key = Single Edge, i.e., the Alt key replaces to the Ctrl key on Mac.
Fredo, is there a solution to this problem?

fredo6

Strange. Normally, Sketchup should take care of that, as it does on PC with the Alt toggle.

By the way, my understanding, the mapping of modifiers between PC and Mac is

Shift on PC --> Shift
Ctrl on PC --> Command (i.e. the apple key)
Alt on PC --> Ctrl

In edge selection, ALT is used for setting the 'all connected edges' mode

as a toggle (press and release), to set/unset this mode as the current mode
when clicking (keep pressed), to temporarily force the selection of all connected edges, regardless of the current mode

Do you have a problem for 1) only, or for both usages?

In any case, I am afraid that the keyboard is lacking modifier keys, on Mac (as for Windows too). So little hope for a solution, especially because I don't have a Mac to troubleshoot.

mvollrath

Fredo, you are the best! Thank you for yet another incredible tool! I use RoundCorner daily and am very excited for the changes that come with FredoCorner!

Arc

This is full Chinese translation.

FredoCorner_ZH.lang

fredo6

@arc said:

This is full Chinese translation.

Thank you very much. That's a big work.

As you may know, part of the translation of my plugins is located in LibFredo6, where I define some of the common basic strings. So if you have time, it would be nice to complete the Chinese translation of LibFredo6 (it is already largely translated).

Many thanks

Fredo

tiout

Bonjour Fredo.
Je crois que tu es français donc je me permet d'écrire en français...
Je viens de télécharger la version v1.1c et j'obtiens un trou a chaque sommet de cube.
Est-ce normal ?

...et j'en profite pour te remercier pour tout ce travail et ces plugins qui sont devenus des outils usuels indispensables au quotidien.

Édit : finalement c’est bon après avoir remis les options par défaut...

Arc

@fredo6 said:

@arc said:

This is full Chinese translation.

Thank you very much. That's a big work.

As you may know, part of the translation of my plugins is located in LibFredo6, where I define some of the common basic strings. So if you have time, it would be nice to complete the Chinese translation of LibFredo6 (it is already largely translated).

Many thanks

Fredo

Yes, I am working on it.

Oxer

@fredo6 said:

Strange. Normally, Sketchup should take care of that, as it does on PC with the Alt toggle.

By the way, my understanding, the mapping of modifiers between PC and Mac is

Shift on PC --> Shift

Ctrl on PC --> Command (i.e. the apple key)

Alt on PC --> Ctrl

In edge selection, ALT is used for setting the 'all connected edges' mode

as a toggle (press and release), to set/unset this mode as the current mode

when clicking (keep pressed), to temporarily force the selection of all connected edges, regardless of the current mode

Do you have a problem for 1) only, or for both usages?

ALT on PC --> CMD ⌘ on Mac
CTRL on PC --> ALT on Mac

If I use CMD instead of ALT, the 2) usage works fine.
CTRL+Left-click on Mac it's like a right-click, it appears the contextual menu, press and release CTRL key on the Mac does nothing.

I translated the last version on FredoCorner to Spanish language, here is the file:

FredoCorner_ES.lang.zip

fredo6

@oxer said:

ALT on PC --> CMD ⌘ on Mac
CTRL on PC --> ALT on Mac

If I use CMD instead of ALT, the 2) usage works fine.
CTRL+Left-click on Mac it's like a right-click, it appears the contextual menu, press and release CTRL key on the Mac does nothing.

Woooh. I thought the equivalent of CTRL on PC was Command⌘ on Mac.
Then within FredoCorner, does the ⌘Z works as the shortcut for Undo (for instance an edge selection), or do you need to use ALT-Z?

Oxer

I talking about the use of keys modifiers on FredoCorner.

@fredo6 said:

Then within FredoCorner, does the ⌘Z works as the shortcut for Undo (for instance an edge selection), or do you need to use ALT-Z?

If I press ⌘Z or ALT-Z these modifiers don't work for Undo (for instance an edge selection), I can Undo the operations when I do click on curved arrow (left) of the palette.

macOS 10.13.6
SU2016

fredo6

NEW RELEASE: FredoCorner v1.1d - 19 Sep 18

FredoCorner 1.1d includes bug fixing, as well as a full translation in Spanish by Oxer and in Chinese (by Arc).

Requirement: LibFredo6 8.6e

Please note that:

there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
Terminal corners (that is ending on a single edge) may present issues and bugs
Variable offset tools are experimental
No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.

fredo6

@oxer said:

I talking about the use of keys modifiers on FredoCorner.

@fredo6 said:

Then within FredoCorner, does the ⌘Z works as the shortcut for Undo (for instance an edge selection), or do you need to use ALT-Z?

If I press ⌘Z or ALT-Z these modifiers don't work for Undo (for instance an edge selection), I can Undo the operations when I do click on curved arrow (left) of the palette.

Oxer,

You are right. Actually, this is the Sketchup API doing this mapping of CTRL on PC toward ALT on Mac. I always thought it was CTRL on PC toward ⌘ on Mac!!

I can indeed change the behavior.

I just open a thread to get the opinions of Mac users.

Fredo

PS: by the way, in the native Push Pull tool, what is the modifier key on Mac to keep the original face?

laudhi

I don't know this is a bug or not, but there is a difference between Fredo Corner and Round Corner when applied to simple box with holes.

Fredo Corner.jpg

Round Corner.jpg

Oxer

@fredo6 said:

PS: by the way, in the native Push Pull tool, what is the modifier key on Mac to keep the original face?

It's the ALT key on Mac.

jiminy-billy-bob

Does this help, Fredo ?

https://www.sketchup.com/sites/www.sketchup.com/files/sketchup2018refcardmac.pdf

fredo6

@jiminy-billy-bob said:

Does this help, Fredo ?

https://www.sketchup.com/sites/www.sketchup.com/files/sketchup2018refcardmac.pdf

Very useful. Thanks a lot.

On Mac, it seems that Sketchup uses Alt as the equivalent of Ctrl on PC. Skeytchup also uses Command on Mac as a modifier (which appears to be the equivalent of Alt on PC).

So I better stick to this convention and keep my plugins the way they work.

Simply, I will change the tooltips and documentation, so that it is reflected.

Fredo

evapal

Hi Fredo,

You make fantastic plugins that allows to explore new design forms and I'd like to thank you for that. It's just I've downloaded your new FredoCorner as it is prefect to model a seat I am working on right now but it doesn't seem to work. I can see the toolbar but don't get the control board. I've got Mac and Sketchup 2017. I'd appreciate any word of advice ::

fredo6

@evapal said:

Hi Fredo,

You make fantastic plugins that allows to explore new design forms and I'd like to thank you for that. It's just I've downloaded your new FredoCorner as it is prefect to model a seat I am working on right now but it doesn't seem to work. I can see the toolbar but don't get the control board. I've got Mac and Sketchup 2017. I'd appreciate any word of advice ::

Could you elaborate a little bit more on your problem.

Could you also open the Ruby console before you launch FredoCorner, to see if there are errors messages.

Note that you need to upgrade LibFredo6 to its latest version (8.6g)

Thanks

Fredo

fredo6

NEW RELEASE: FredoCorner v1.1e - 23 Sep 18

FredoCorner 1.1e includes bug fixing and small adjustments.

Requirement: LibFredo6 8.6g

Please note that:

there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
Terminal corners (that is ending on a single edge) may present issues and bugs
Variable offset tools are experimental
No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.