Site modeling madness

Box

Try this file.
I have removed your 'layers'. You should read up on how to use layers in sketchup.

mumbus

Still the same issue. The layers are all from the autocad import from the site engineer.

mumbus

Are you suggesting that my inability to create faces is a layer management issue?

faust07

Have often the same problem.
I use tt_flatten.rb (thomthom).
You'll get a new group and then have to revert faces, draw lines to generate faces and bring the textures back... (5 min)

site_f07.skp

mumbus

Awesome! Thank you faust! I was using Eneroth Flatten to plane. Not sure it even did anything. I will grab the one that you mentioned

mumbus

@faust07 said:

Have often the same problem.
I use tt_flatten.rb (thomthom).
You'll get a new group and then have to revert faces, draw lines to generate faces and bring the textures back... (5 min)

I have another brain bender for you. Can you think of any reason why this window wouldn't close? I alinged the axis to the surface. Most of the surfaces close. When I draw lines that intersect with each other, I can trim them like they are all on the same plane, but I cannot get this window to work. Any help would be greatly appreciated.

building.skp

Charlie__V

@mumbus said:

I have another brain bender for you. Can you think of any reason why this window wouldn't close? I alinged the axis to the surface. Most of the surfaces close. When I draw lines that intersect with each other, I can trim them like they are all on the same plane, but I cannot get this window to work. Any help would be greatly appreciated.

Cant really say......I played with trying to close the window faces, and then decided to copy group & draw anew with guides...and it closed just fine.....one or more of the lines on your window must be askew.....sorry that really doesn't help, but using guides and editing line style to color by axis is one way of alleviating these type of problems.

C

V8_building_wguides.skp

faust07

After grouping, rotating I used the same plugin - then reverse faces, transfer textures, move back and turn, explode..

building_f07.skp

faust07

The easiest drawing exercise imaginable in SketchUp obviously doesn't work anymore since some versions (as I see, fortunately not only for me) - dividing flat and textured surfaces with drawn straight lines.
Another problem when drawing lines on textured surfaces is that SketchUp often creates multiple coplanar faces and also deletes adjacent textures. It's quite a fiddle editing this tangle. Usually it works better not to draw the lines, but to copy adjacent longer lines to the desired place and to delete protruding parts.
Plugins such as 2D Tools (TIG), Edge Tools (Thomthom) or Fredo Tools (Fredo6) are also helpful when drawing or editing lines on flat surfaces.

oceanembers

My process for terrain:

Create base/existing from contours with Toposhaper
Create new forms
Intersect and delete excess

Honestly the best thing is just to keep it simple. Hell, if it's just a flat slope or something to that effect, you needn't even bother with toposhaper.

mumbus

Thank you all for the input. I means a lot just to know that I am not the only one experiencing the issues. I thought I was going crazy. I dont remember having these same problems years ago. Thanks again!

blackdogsketch

Boy- there is a lot to talk about regarding site development (Civil, Landscape, Architecture) .
I almost think this could be a subforum.

I have become very proficient at 2D sitework. Lots of tips and tricks in my head at this point.

3D site development has been an ongoing process and I'm getting fairly OK. (haha)
the Artisan extension has been a big help.
If anyone is familiar with Artisan, maybe you could help me with an issue.
Retaining walls.
The area of site above the wall needs to get graded at a different slope as the area below the wall.
I cut the TIN, using the wall...Intersect with Selection. Remove the overlap zone of the TIN.

OK.
Now, in Artisan, the Crease tool will allow you to define edges of points that you can "freeze" or lock, so that they don't get changed by subsequent sculpting operations.
In this case however, I don't want to completely lock the line of the terrain against the wall...I want to restrain the points such that ONLY z-axis movement is possible. I don't want to open up gaps between the wall and the terrain which will occur if nothing that I'm discussing is performed.

Can anyone offer help on this issue? There's not much in the way of help on Artisan's website or You Tube videos that deals with topography/landscape/building forms to any great degree.

pilou

Where we can find your SKp file or a portion of your file with problem ?
in save as V6 of course for no problem of compatibility!

blackdogsketch

@pilou said:

Where we can find your SKp file or a portion of your file with problem ?
in save as V6 of course for no problem of compatibility!

I have never uploaded a file here. How do you do it?

blackdogsketch

https://www.filehosting.org/file/delete/789831/M1A7M93swn7EZMjr/TEST%20FILE%20VER%202017.skp

pilou

Seems there is nothing in your link!

@unknownuser said:

File TEST FILE VER 2017.skp not found!

Try the free https://send.firefox.com (No need FireFox - Max 7 days)

pbacot

Have you tried holding shift while using the sculpt tools? It won't work with smooth mode, but you can crease after you get the edges at the right elevation then use smooth. Uncrease to fine tune the edge elevation using shift to keep the movement vertical. Been awhile since I used it, but that seems to work. It would be nice to be able to just lock it at vertical movement.

blackdogsketch

@pbacot said:

Have you tried holding shift while using the sculpt tools? It won't work with smooth mode, but you can crease after you get the edges at the right elevation then use smooth. Uncrease to fine tune the edge elevation using shift to keep the movement vertical. Been awhile since I used it, but that seems to work. It would be nice to be able to just lock it at vertical movement.

I will try that! Thanks!
I was messing around yesterday and fount that once I make the cut inthe tin...I can use the Select Brush to highlight the segments on one side of the cut only...then use the stamper to get the selected region level. that moves stuff only in the Z-axis. Then I creas that edge when it's darned close to what I wan for final adjustments to the whole area. Uncrease for the final edge tweaks if necessary. Seems to work OK.

By the way, the link to the file is posted above if anyone else wants to offer suggestions. Thanks.

pbacot

There's no file on the link.

imabzeous

do watch adam's channel on youtube "winning with sketchup" he did a tutroial on site modelling and terrains. very nice and detailed. here is link to part 1 and you can check out other videos too..

https://www.youtube.com/watch?v=bA4tGgOFQJQ