-
Cadmunkey has made some solid observations:
-
Any way you try to tackle it, Archicad is just cumbersome, and in many ways, needlessly complex. I have Version 18 and I still---after many attempts to learn it, find it almost impenetrable to figure out how to use effectively for buildings.
-
SK is indeed easy and intuitive. This is why I am here with 'the little program that could"...
-
This comment is quite astute: Trimble--no fools, will at some point offer the graphical ability to parametricize objects and permit them to be both 2D & 3D. They will also offer the product for a one time sale, and it will be in line with the cost of SK. They do understand volume sales. I can only imagine they intend to grab major market share of the BIM industry. They will.
-
This is why I believe PS should take a reflective moment to look down the programming road. Their moment is now. Why not take our money as we are offering and suggesting they should. Three one time purchases of $300US, multiplied by many hundreds (and more) can't be all bad, right....?
But good luck to you Andrew (BTW, I know what it is like to have employees on a job site. If lucky, it is barely controlled chaos. If not.....). Best.
-
-
@dsorensen said:
- This comment is quite astute: Trimble--no fools, will at some point offer the graphical ability to parametricize objects and permit them to be both 2D & 3D. They will also offer the product for a one time sale, and it will be in line with the cost of SK. They do understand volume sales. I can only imagine they intend to grab major market share of the BIM industry. They will.
They surely release new BIMalike features every new version.
Parametrics is half developed with DC's poor UI and some other functional, annoyances.
Doors and windows surely are non existent in Native Sketchup and hole cutting components should be revamped for this to succeed.
Reports are also cumbersome and neglected.
Layout is being pushed up and getting more and more workeable, but still not there yet. We can manage with it yet it must get way better.
Everything else just works so well that the above seem secondary...
I have no doubt Trimble's intentions toward AEC/BIM are way up there!
-
I can see where with SU you can just get to the bone of your design, where you have to be sort of "explaining" your details to a more complex BIM modeler or "tricking" it to do something that isn't built-in. I noticed my friend seems to have more luck with a warehouse than a contemporary residence on ArchiCAD.
-
@utiler said:
What I do see however is an opportunity for us as designers to extend our offering to clients in the way of BOQ's given the back end power of PlusSpec. Do yourself a favor and send out a set of plans to a quantity surveyor / estimator and ask for a quote to supply a take off? That's what you will be able to charge after clicking this button. [attachment=0:3vwlrphf]<!-- ia0 -->2015-03-06_0921.png<!-- ia0 -->[/attachment:3vwlrphf]
What you are saying is incorrect, you can offer a guide, but as far as the structural elements go you would need engineering for the steel, a good understanding of the various codes for timber, etc
Then other areas would require the professional input like a proper quote for the kitchen cupboards, stairs etcThe client still needs to go the relevant professions to realise the practicality and cost of his project. Is a professional going to reduce his price just because you got a BIM drawing?
-
Hi fellas, I read through this thread from front to back last night and its interesting feedback. Lucky for me, Andrew introduced me to PlusSpec quite early on so I've been working along with its development and for me, there is so much more to the program that meets the eye. I concur with everyone's thoughts that it seems an expensive add-on to SketchUp and there lies the challenge for Rubysketch to find the ideal balance for consumers.
What I do see however is an opportunity for us as designers to extend our offering to clients in the way of BOQ's given the back end power of PlusSpec. Do yourself a favor and send out a set of plans to a quantity surveyor / estimator and ask for a quote to supply a take off? That's what you will be able to charge after clicking this button.
-
I think you will find the whole BOQ side is of little interest to architects in the US. It's a different way of working.
-
I did say, 'take off' didn't I, Philip? Obviously the structural elements of the building would need an RPEQ qualified engineer but as for timber design and [again] 'take-offs' are all done for you.
-
Agreed. Boq's are a red herring.
The real value of PS---if Andrew will allow us a free demo to determine this for ourselves, is if the plugin has parametric walls, floors and roofs (editable together...!!), and if the components like doors & windows are hybrid 2D-3D.
If so, that would be a major addition to the SK toolkit, but as it stands (at $1000US for a yearly subscription) I suspect there are very few of us who will want to play (I have no idea who the Co's or individuals Andrew is referring to that might happily be throwing that kind of money in his general direction.....).
But to the central question...Andrew: what happens to subscribers if you go out of business, or decide you don't want to program upgrades anymore? What does a subscriber have if at the end of any given year, if you are no longer there.....?
Please answer this.
-
@dsorensen said:
But to the central question...Andrew: what happens to subscribers if you go out of business, or decide you don't want to program upgrades anymore? What does a subscriber have if at the end of any given year, if you are no longer there.....?
Please answer this.
I'm pretty sure that if plusspec would close the doors, they would find a way for people to use it endlessly.
For me the BOQ is always human made. Quantities of materials and building elements are important but there's no software that can determine the complexity of a job on site or the effort workers will put on something. That is where a cost estimate will eventually fail completely for one contractor, and be completely on the spot for the other.
I do think, however BOQ's shouldn't be underapreciated. The thing is they should always get an experienced eye over it and I can't trust the computer for that.
-
Hi everybody!
I stopped using Vectorworks because Sketchup is cheaper, better in 3D modeling and it has a big uses database around the world.
Vectorworks costed me about 3000 euro + a yearly 720 euro subscription. I wanted to made BIM drawings where I could generate all drawings from 1 3D model. The subscription made no sense at all.
They promised me BIM but it didn't work well, all I get for the yearly upgrade was a new version with no better BIM modeling tool. I hated it. So that's why I cancelled.Now, as an architect, I use Sketchup with a tool called SKALP, to make architectural drawings with hatches that looks exactly the same as in Vectorworks. One payment of 59 euro for SKALP and free upgrades. That's fair!
The price of Sketchup for a business is very low, and something like 99 euro for a new version is very low as well.I heard about Plusspec some months ago. I emailed them several times to ask about a version for the Dutch market, I never got any response. The price is horrible, it's even more expensive than Vectorworks's yearly subscription.
What I expect for a subscription, and what I expect before buying, is great service and to know the upgrades will be fast and good! I don;t know what I'm buying because Plusspec don't answer any of my questions.I bought CONDOC tools, which should be used to make construction documents in Sketchup and Layout. Yearly costs are 250 euro. But here it comes, and why I hate yearly subscriptions, I don't get any help from CONDOC, no support, their website is horrible with a forum that almost nobody uses. The only way to get my answers is to schedule a 90 dollar 90 minute phone call with the owner to get any support. This makes no sense at all.
And now I receive 3 emails a week via their newsletter where they ask me to buy CONDOC. Dammit, I already bought it, I just need tips and answers to my questions to make it work!!!It's all about marketing!!!!!! If you have something great, which Plusspec can be, make it available to everyone! Sketchup is used around the world and has millions of users. Ofcourse not all business and people will buy, but to make it work and to make it profitable, you need a lot of people to use it. You can't expect me to pay almost 1000 dollars yearly to someone I don't trust. Make me trust you, and answer my questions for example.
Why didn't Plusspec asked us what we would be willing to pay? That is such an important question!!!
If everybody wanted to pay like 200 dollars once, and 59 dollars for a yearly subscription to get updates, you know what to do. Make that work for you or stop developing it.I understand that it took lots of money and time to develop Plusspec, but to earn it back in a short time to ask us to pay 1000 dollars yearly is just strange. See all reactions above, almost nobody will pay 1000 dollars yearly, even Vectorworks or Revit are cheaper... With this expensive subscription only a few people will buy and you won't make any profit. Nobody is happy. And 1000 dollars a year I expect to be treated like a king, I have input to make Plusspec better, I get updates all the time, we have scheduled calls with developers to make it better, you call me to ask how I work to make Plusspec better, I get the best tutorials from you to make it work, I get access to a Plusspec community to learn from each other, Plusspec will work for the Dutch market (we build different in Holland than in Australia) etc etc etc.
Hope this helps!
Cheers!
-
Joe pretty much says it all really, I 100% agree.
-
One might look at the success of DataCAD which had a very low price point in the 90's. Their user base reportedly doubled in three months in 1994. Now it sells for $1,295 but their early price slashing helped create a loyal following. Free trial.
-
@pbacot said:
Free trial.
I think PlusSpec can learn a few things from drug dealers. If only we had the opportunity to develop a PlusSpec addiction...
-
-
Hi guys thanks for posting, I know you all are disappointed Plusspec is out of your budget. I am sorry that is the case for you. All I can do is keep on creating pro software that saves you money and time.
I am not Google and I am not Microsoft, I am a builder who spent all most 8 years creating software that helps me and the rest of the users design and build more quickly and more easily.I know some people that will spend 3 hours searching the Internet for a free Sketchup model, the exact same model that costs $10 on turbo Squid or other similar sites. It probably cost that person $60 to to save $10. The same analogy goes for PlusSpec.
I have made the position clear and have set the price. If you want to get your local registered training provider to contact us for a Student version please do. If you want to get involved with PlusSpec because you have a heap of time we have plenty for you to do and in return we will help you with a license.
We can use more people as we are being bombarded with people learning Plusspec for their business.
Plusspec will save you hundreds of hour of work and make you look like a professional or more of one.
This software is professional software that is easy to use. If you do not want it do not buy it.
Keep up the good work guys, I have customers to support and people to help.
I love Sketchup and its development community!
-
-
@aadbuild said:
... If you do not want it do not buy it. ...
From the posts in this thread, it looks like there are plenty of people interested in purchasing PlusSpec, unfortunately you decided to make your software available as RENTAL only.
-
@tandem said:
From the posts in this thread, it looks like there are plenty of people interested in purchasing PlusSpec, unfortunately you decided to make your software available as RENTAL only.
Well said.
-
-
@rich o brien said:
http://www.youtube.com/watch?v=E0_Vwdl2_FA
"Good 'ol Aussie know how"
Great stuff Dwighty, you famous now.
, good brains need Vegemite and PlusSpec... Both made in Australia. 
Advertisement