A Welcome Message to New SketchUcation Members
-
Hey Everybody. Im coming from the Solidworks community and wanted to introduce myself
-
Welcome!
-
Hello! I have just registered to be able to download the RoundCorner plugin. However when I try to do so, I get "You are not authorised to read this forum" message only. Do I need to do something else?
-
@osicka said:
Hello! I have just registered to be able to download the RoundCorner plugin. However when I try to do so, I get "You are not authorised to read this forum" message only. Do I need to do something else?
You need to post a couple of times before you are recognized as legit... you might be a spam-bot !
Once you are able to get that "RoundCorner" plugin, remember that you also need to install "Fredo's Lib" for it to work... -
Thank you for you answer. Is it enough for me to post few posts in this topic? How many is "few"? I do not want to bother you or anyone with the download but so far it seems that there is no other way.
-
-
You only need to be logged in to download anything from here....
SketchUp Plugins | PluginStore | SketchUcation
SketchUp Plugin and Extension Store by SketchUcation provides free downloads of hundreds of SketchUp extensions and plugins
(sketchucation.com)
-
Please remember that this is a community... so sharing knowledge and giving something back is nice - but it's not compulsory...
As for 'few'...
If you make another sensible post on the forum you'll probably have enough 'credits' to start downloading etc.Most importantly - remember to switch off any Ad-Block add-on you might have on your browser, just for sketchucation.com - it's part of the ToS you agreed to when joining - if you have one active and you are not a Premium member, then you may be barred from seeing images, downloads etc - the modest income derived from the small ads on the SCF pages help to pay for the site to exist...
-
Thank you guys for the information. Yes, originally I came to this forum to download a free plugin. I have found multiple WWW pages saying that RoundCorner is great and that it is free. I just wanted to quickly show how some furniture will look like in our new house to my wife.
Since I could not download the plugin apparently because of the local activity-credit system, I made the round corners by the Follow me tool as I always do, it just took 1-2 hours longer than it probably would take when using the plugin. Plus about an hour chatting on this forum:)
I use Sketchup only for testing architectural features of our house so I do not consider myself an expert to give advice to others. This means that I won't be able (not mentioning to have spare time) to contribute to this forum which in turn won't allow me to download. Seems like chicken-egg problem.
I'm describing my situation for local admins to consider the download limitation for newbies. For me it means that I'm leaving this forum (at least for a while) abandoned with the Follow me tool to do round corners. Who knows, since I have over 20 years of programming experience (I also know Ruby but not from Sketchup), I could provide it to this community based on my experience with the plugin downloaded. But this won't happen now because I have nothing to look at.
Thank you for your time!
-
As pointed out above, it's your adblocker, popup blocker or firewall that is preventing your download, not your number of posts. A few posts are moderated to see that you aren't posting spam but many thousands of members happily download everything they want without ever posting.
It only requires registration and the acceptance of a few sketchup related Ads to see images and downloads. -
Hello all
just joined tonight.
been using sketchup for a few years, I've learned enough to get by but I want to learn some new chops. I've gone stagnant in my learning, happy to find this site. Picked up a coupla things from the "tips for new user thread" already.
I've been using the program long enough to be an intermediate user I guess but it seems my skill level is probably "beginner".
I seem to be familiar with the components, groups, exporting 2d drawings and I've gotten fairly handy with all the tools but..............
short list of stuff to learn would be, layers, plug ins, space mouse? go to pro version?
layout?
I'm a cabinetmaker not a computer jock and an old fart at that. A bit intimidated by all the info on this site. Any guidance to particular posts would be welcome, until then I'll just continue plowing through that newby tip section.Thanks
Sandy Jackson -
Hi All,
Thanks for the warm welcome and all of the informative posts. Greetings from Houston, TX. This being my first post, so I thought I would share a little. I have worked or dabbled in a little bit of everything it seems. I'm an old man with a young kid inside.
Started with computers building Motorola, Zilog and various other 'computer on a chip' kits, mainly playing with 6800 and z80 series chips sets. Did a lot of machine code programming with dedicated microprocessor stuff from a hex pad. My how things have changed.
These days I'm learning to use SU to plan and build projects for the needy. My last project was an emergency shelter based on Paul Elkins plans found here: http://www.elkinsdiy.com/stationary-shelters/homeless-emergency-shelter/ My material and size requirements differed from the original so I had to make some adjustments.
I claim an intermediate user level but that might be an exaggeration. Though I can get around in SU, I have a lot to learn and will share what I can. I look forward to stealing all your ideas.
Thanks in advance.Phillip
-
I am using SU for planning and modeling woodworking projects. I started with SU 2 weeks ago so I'm definitely at the Beginner level.
My first projects have been a workbench and a washer/dryer pedestal. The good news/bad news scenario is now that my wife has seen the SketchUp models she is coming up with all kinds of new projects for me! -
Hi. I came across this forum to download some plugins, for what I've seen this seems like a good place to get plenty of help and advice. I'm an intermediate Sketchup user mostly using it for level design. I have improved my skills the past year and I hope to continue to improve them by reading the tutorials on here.
-
Hello, I come from AutoCAD and now I'm starting with sketchup because I think a great program. I was told about this site to learn and have resources and plugins. Thank you for allowing me to participate
-
Hi all, others have replied here with intros, so here's mine.
I'm Mark, I work at a pretty well known art museum in New England dedicated to picture book art. We currently don't have any 3D design going, and it makes exhibition design a rather clunky thing, so I am teaching myself Sketchup. I have messed around with it in the past, but I'm now trying to learn the neat,tidy adn functional way to do things. Hopefully with a little time each day and a little patience I'll be able to build a nice usable template of our galleries, learn how to make picture frames of various sizes QUICK, and import images. I'd like to create our cases as components too. Lighting in Sketchup--not so concerned about that for now.
Anyway, if anyone has any tips about any of this, particularly the picture frame and image import thing, I'd appreciate it very much if you'd point me in the right direction.
Best to you all, and I look forward to reading the forums!
ff (Mark)
-
Hi all, I think my first post got lost (I submitted it days ago and no approval--maybe this forum is dead?) so I'll try again.
My name is Mark, I work at a well known picture book art museum. Starting to learn SU for exhibition design.
Can anyone point me to any good tips/posts/resources for learning this?
Thanks!
ff
-
@fearfeasog said:
Can anyone point me to any good tips/posts/resources for learning this?
Best way to find out stuff is to ask. Usually the quickest means of getting good advice around here. Welcome aboard
-
Hello all.
I'm new to SketchUp but beginning to pick things up. I Used the month free trial before upgrading to 2016 pro a couple of weeks ago. First time 3D modelling for me so with no previous experience, my learning curve will be steep.
My background is in home interiors and building custom made fitted furniture. With a passion for design, it is my aim to concentrate on the design side of home interiors now my body is starting to wear out.
I came across here from SketchUp Community (Scooter over there) with a recommendation of a plugin that @DaveR told me about. The Fredo Round Corner. Its taken me many hours of reading all the issues that others have had and many attempts at trying to install the plugin. But I succeeded in the end. I may well post up my 'computer illiterate' way at some point for those who struggle with zips and toggles or whatever else holds this stuff together. Another day perhaps.
Looking forward to expanding my knowledge with you all here.
Scott
-
Hi, Im november92
,
I have used SU for years but because of too much other work there was not much time to keep working with it. Im still a very enthusiastic SketchyPhysics user.The latest versions I have are
- SketchUp 7
- SketchyPhysics 3.1
Now Im looking for the latest S-Version and the best matching SU-Version.
And.. after Trible's acquisition of the 3D-Warehouse I noticed a strong increase in the use of the forum. Which makes me very sad.
Has the use shifted to another place or is the warehouse still the best place to swap model?Thanks a lot for some helpful answer.
Advertisement