[Plugin] Compo Spray 1.4.2 Updated

Sir · 4 Oct 2012, 01:30

Is it possible to set the density of the components sprayed?

what are the trials to drop components? - this model has just gone past 64000

mitcorb · 4 Oct 2012, 02:32

Hi, Sir/ Mat: The density or frequency of the components is currently controlled by the choices of by vertex/ vertices, or by the use of "brushes" with triangular or rectangular shapes. See the first page of this topic and read down and you will see this mentioned. I am not entirely sure if I understand your question about "trials"?

Didier Bur · 4 Oct 2012, 11:55

@Sir: density is set with the "pressure" parameter of the dialog box.
Take a look at the user guide just in case...

Sir · 5 Oct 2012, 02:54

haha I did read the included pdf, couldnt see it - must have missed it.

so what are the trials to drop components? does the plugin try to drop all the components in exponentially increasing numbers till it drops them all?

Didier Bur · 6 Oct 2012, 10:12

No, it drops components one by one but when it cannot drop an instance at the location the ray hit the surface, this is considered like a "trial".

satipatana · 15 Dec 2012, 15:50

@dcrites said:

Does anyone have a solution for the problem which Pilou posted earlier? I have a 15" HP Laptop running windows 7, with Google Sketchup 8 -

I'm a Landscape Architecture student, so spraying trees rather than placing them individually would be an absolute godsend. But if I can't get to the bottom of the screen, I can't do much. I've tried using the 'tab' key to get to the 'spray' icon, but it doesn't seem to work (though tabbing over to the 'close' icon does. Arg.

768 pixels is the maximum height on my monitor.

I had the same problem in a laptop asus K55V with the same maximun resolution for the screen. I don´t know if yours has this feature but my laptop alows to change the orientation of the scren using alt+ctrl+arrows. So, to use the plugin I change the orientation to vertical and then i can see displayed the ok button at the bottom. I hope you can at least use it this way.

careca · 26 Dec 2012, 04:32

Hi.

What tweak would be needed to make this fantastic plugin work under the portable plugins extension? So far it would not show up in the Draw menu. I assume it has to do with the path reference somewhere?

Thanks.
martin

matt.gordon320 · 8 May 2013, 17:40

Hi Didier,

I'm getting this error when trying to add CompoSpray to my plugins library that's hosted on my company's network drives (utilizing Fredo6's 000_Additional_Folders script). Any suggestions on how I can fix it so I can avoid the error, and still deploy the plugin network wide?

I'm trying to learn Ruby for SketchUp, so let me know if my assumption is correct. The error is resulting from CompoSpray being directed to look at C:...Plugins for the language file instead of the location that Additional Folders is redirecting it to, correct?

Thanks!

Didier Bur · 8 May 2013, 20:29

yes, u're correct. I'll check the code.

sidewalk · 28 May 2013, 23:35

I'm getting the "No Component Selected" error message, even when a component IS selected in the drop-down menu. The error is occurring across different files and components. Any suggestions?

Sorry if this issue has previously been addressed.

Thanks!

xaideoe · 3 Jun 2013, 16:46

@matt.gordon320 said:

Hi Didier,

I'm getting this error when trying to add CompoSpray to my plugins library that's hosted on my company's network drives (utilizing Fredo6's 000_Additional_Folders script). Any suggestions on how I can fix it so I can avoid the error, and still deploy the plugin network wide?

I'm trying to learn Ruby for SketchUp, so let me know if my assumption is correct. The error is resulting from CompoSpray being directed to look at C:...Plugins for the language file instead of the location that Additional Folders is redirecting it to, correct?

Thanks!

Same error here on Mac... Only in the new version.

TIG · 3 Jun 2013, 17:01

PM the author - Didier - he may have forgotten about fixing it...
He has compiled his entire code set in the subfolder - so it's not readable.
It's a good idea to setup a reference to the folder path in readable code [e.g. the loaded rb file] that the rbs then uses.
Ruby's FILE doesn't work inside rbs files, but he could have set in the loader rb...
$cs_Folder=File.join(File.dirname(__FILE__),'CompoSpray')
and then used that is his rbs compiled code... instead of the hard-coded
File.join(Sketchup.find_support_file('plugins'),'CompoSpray') that then looks in the wrong place IF the install is NOT into the standard folder...

dmonticalbo · 23 Jul 2013, 09:28

How come it doesn't work on SketchUp 2013?

thomthom · 23 Jul 2013, 15:15

@dmonticalbo said:

How come it doesn't work on SketchUp 2013?

Can you explain what "doesn't work"? It's a bit vague description. Do you get any errors installing or using? (Keep Ruby Console open. Window > Ruby Console)
Unexpected behaviour during operation?

jackwatson · 15 Sept 2013, 10:28

I can't seem to get it working on sketchup 2013 either.

Installation seems to be fine, as the icons appear in the toolbar, but clicking 'Components Spray [Top-Down]' and 'Components Spray [Perpendicular]' does nothing.

Clicking 'Settings' brings up a dialog box with a couple of drop down options, but playing with these seems to do nothing to make the actual tool function properly... unless I'm doing something wrong, which is a strong possibility

Any help would be appreciated!

Nightgaunt · 26 Sept 2013, 13:51

I am having the same issue with SketchUp 2013.

Ruby console reports the following when spray on horizontal is clicked.

@unknownuser said:

Error: #<Errno::EACCES: Permission denied - C:/Program Files (x86)/SketchUp/SketchUp 2013/Plugins/CompoSpray/csSettings.html>
(eval):373:in initialize' (eval):373:in new'
(eval):373:in write_cs_dialog' (eval):111:in compoSpray_main'
C:/Program Files (x86)/SketchUp/SketchUp 2013/Plugins/compoSprayToolbar.rb:17
(eval):373:in `call'
(eval):373

Which is odd as it is the only plugin to which this happens. Any ideas?

.......Changing permisions for the "CompoSpray" folder in Plugins directory using Windows Explorer "properties" is a good place to start! Just answered my own question.

TIG · 26 Sept 2013, 16:19

Certainly looks like a 'permissions issue'.
Ensure that your Plugins folder... and all of its contents - its files and its subfolders and their files have FULL read/write properties>security permissions set for everyone involved, and they apply to all contents !

Oxer · 7 Nov 2013, 17:14

Hi, I'm having problem with the CompoSprayES.lingvo file and with the components name. I explain, if the words into translation file or into component name have accentuation signs, the plugin doesn't work.
Examples:
In .lingvo file
Triángulo--> plugin doesn't work Triangulo--> plugin works
Octógono--> plugin doesn't work Octogono--> plugin works

In component name
Trébol--> plugin doesn't work Trebol--> plugin works
Árbol--> plugin doesn't work Arbol--> plugin works

SU8 and Mac OSX 10.9

TIG · 7 Nov 2013, 18:54

@Oxer

Is the file a UTF8 without BOM format [view in Notepad++] ?
It is best to avoid accents in SketchUp's Ruby [until SketchUp catches up with Ruby2...]

Oxer · 7 Nov 2013, 19:32

@tig said:

@Oxer

Is the file a UTF8 without BOM format [view in Notepad++] ?
It is best to avoid accents in SketchUp's Ruby [until SketchUp catches up with Ruby2...]

Yes, the file is in Unicode (UTF-8) format, always I give this format to all translation files. Other plugins don't have problems with the accetuation in the .lingvo file
TIG, see that the problem is in the component name too.