[Plugin][$] RoundCorner - v3.4a - 31 Mar 24

TIG · 9 Sept 2012, 08:08

It's trying to make/use a file called 'Fredo6Trace.txt' in the 'plugins' folder.
It's failing with a 'Permission denied' error.
It's not in the folder contents you show.
The script ought to make it automatically.
Therefore I suspect that you must have the 'security permissions' set to be oddly limited for the 'plugins' folder.
I'm not sure how you change this on a MAC, but on a PC it's relatively straightforward to change them to 'FULL', so I'd expect on a MAC it'll be easy too.
This change to 'FULL' permissions will allow you to add/remove files/folders etc and for scripts to write files into that folder too.
Also note that your Materials, Components and Styles folders ought to have the same permissions, as from time to time you will want to add files readily to these too...

mikeeeey · 9 Sept 2012, 09:02

@tig said:

It's trying to make/use a file called 'Fredo6Trace.txt' in the 'plugins' folder.
It's failing with a 'Permission denied' error.
It's not in the folder contents you show.
The script ought to make it automatically.
Therefore I suspect that you must have the 'security permissions' set to be oddly limited for the 'plugins' folder.
I'm not sure how you change this on a MAC, but on a PC it's relatively straightforward to change them to 'FULL', so I'd expect on a MAC it'll be easy too.
This change to 'FULL' permissions will allow you to add/remove files/folders etc and for scripts to write files into that folder too.
Also note that your Materials, Components and Styles folders ought to have the same permissions, as from time to time you will want to add files readily to these too...

Gee.. Thanks for the hint! With the help of you mentioning about adding/removing/permissions, I went to the plugins folder and change the permission from Read only to Read & Write. Now it works! Thanks a million!

lengzaiong · 21 Sept 2012, 08:08

hello ... how can i download

Gaieus · 21 Sept 2012, 08:27

In the first post of this topic, there is a huge Download image. Pay extra attention, please, as another plugin (mentioned there) is also needed for this one to run properly.

cipher_nemo · 21 Sept 2012, 19:29

Doesn't work for me. This plugin hasn't been updated in a while. Does it still work for the latest SketchUp version?

Windows 7 Pro 64-bit
SketchUp 8.0.15158
LibFredo6 4.6c library
RoundCorner 2.3a plugin

The plugin loads fine, no errors. I can access it, and its separate toolbar pops up. But it doesn't work correctly...

1.) It doesn't work on Components or Groups. Perhaps this is by design?
2.) When I do have it work on separate objects, it just makes a total mess of them.

What am I doing wrong? Thanks.

Dave R · 21 Sept 2012, 19:37

It does indeed work on the current version of SketchUp. Did you open the groups or components for editing before trying to use it? Did you set the radius to something suitable for the object you're working on? It sounds like the answer to those questions would be, "no."

TIG · 21 Sept 2012, 19:40

@cipher_nemo said:

Doesn't work for me. This plugin hasn't been updated in a while. Does it still work for the latest SketchUp version?

Windows 7 Pro 64-bit
SketchUp 8.0.15158
LibFredo6 4.6c library
RoundCorner 2.3a plugin

The plugin loads fine, no errors. I can access it, and its separate toolbar pops up. But it doesn't work correctly...

1.) It doesn't work on Components or Groups. Perhaps this is by design?
2.) When I do have it work on separate objects, it just makes a total mess of them.

What am I doing wrong? Thanks.
Have you read any of the thread's posts ???

RE-read the instructions.
Have you got all of the supporting files that the download page tells you to get too ?
Are there any Ruby Console error messages ??
It works effortlessly on 'raw' geometry - i.e. things that are NOT inside 'containers'... BUT it will work inside 'containers' [groups/instances] if you are in 'edit mode'...
You must select sensible 'settings' to get the 'rounding' you want.
It will 'fail' on very very tiny OR very very enormous geometry, so what 'scale' of objects do you have ?

cipher_nemo · 21 Sept 2012, 19:43

Thanks for the fast replies!

Here's an example, where I started a brand new workarea, made a rectangle, push/pulled it to give it depth, selected the edges and surface of one side, then did the RoundCorner icon...

I reduced the window size to view only what's needed...

Dave R · 21 Sept 2012, 19:45

So you have an offset of ~39-3/8 inches and your box isn't that big. As TIG said, go back and reread the instructions.

It looks like it is doing what you have it set to do.

TIG · 21 Sept 2012, 19:50

OK... you don't tell us how 'big' the face is that you want to round the edges on... but the 'radius' of the rounding looks quite large... so I suspect that it's greater than the face involved...
Please look at your settings...
Make 'roundings' that are going to work on the set of edges you are editing

cipher_nemo · 21 Sept 2012, 19:51

@dave r said:

So you have an offset of ~39-3/8 inches and your box isn't that big. As TIG said, go back and reread the instructions.

It looks like it is doing what you have it set to do.

Ok, I feel like an idiot now, lol. I have to change the offset myself. I was testing it and expected a default value calculated on surface I selected. It works fine when I choose my own offset.

There's a request for the OP/author then: a default calculated offset would be awesome. Then those testing it quickly wouldn't be confused like I was.

Dave R · 21 Sept 2012, 19:55

So what would that calculated offset be? Would it round over the entire selected surface or just put a radius on the edges? What would the calculated value be if more than one surface is selected and they are different sizes.

Really it isn't a big deal to set the offset or radius value manually for the job at hand.

It would be helpful when you test a plugin or anything else to have some idea of what you should get and reading the provided instructions goes a long way to tell you that. If you don't read the instructions to know how to use the plugin you won't know if your expectations of the results are valid or not.

cipher_nemo · 21 Sept 2012, 20:02

@dave r said:

So what would that calculated offset be? Would it round over the entire selected surface or just put a radius on the edges? What would the calculated value be if more than one surface is selected and they are different sizes.

Really it isn't a big deal to set the offset or radius value manually for the job at hand.

It would be helpful when you test a plugin or anything else to have some idea of what you should get and reading the provided instructions goes a long way to tell you that.

Yeah, it's not a big deal now that I know what I'm doing.

If anyone else tests out Fredo6's plugin and sees it doing something odd on the first run, they may not seek help. In turn they might give up without going in to change the offset. I just wanted to see what sort of job this plugin/script could do without getting further in to adjust things. Perhaps a first-time value that's something like 1/2, 1/4, or 1/8 of the offset selected would solve that new-to-RoundCorner confusion? After I went in there and set an offset the plugin remembers it, which is nice. In other words, once someone sees it work the first time, then they can play around with its adjustments to incorporate it into their work.

Dave R · 21 Sept 2012, 20:05

If someone gives up on a plugin or anything else because it doesn't give them the results they want and without reading the instructions, they deserve what they get.

As to remembering the setting, it does for the current SketchUp setting. If you close SketchUp and reopen it, the default offset will return to the ~39-3/8" (1 meter).

benzkrichpol · 26 Sept 2012, 12:31

WOW

bagatelo · 27 Sept 2012, 20:27

Please consider these improvements....

gullfo · 27 Sept 2012, 21:21

with the large number of profiles you should just get profile builder full version. works awesome... then hide the joining lines if you need it to blend in.

bagatelo · 27 Sept 2012, 22:02

@gullfo said:

with the large number of profiles you should just get profile builder full version. works awesome... then hide the joining lines if you need it to blend in.

I had already thought of this possibility before.
And I am currently trying this.
Is proving very interesting.
But as the fantastic plugin "Round Corner"
perhaps it would be interesting just the possibility that we can create
and edit our own profiles.

fredo6 · 27 Sept 2012, 22:32

Bagatelo

The interest of RoundCorner is actually fro corners with 3 edges or more.

For simple profiling, ProfileBuilder or even the Follow tool can make the job.

RoundCorner can actually support custom profiles but they have to be symmetric in order to have a correct jonctions at corners with 3 edges. See this post and attached file for an example.
RoundCorner with custom profiles.skp

I did not activate the functionality as this needs some work for profile selection. But if there is enough interest I can do it.

Fredo

bagatelo · 27 Sept 2012, 23:02

@unknownuser said:

I did not activate the functionality as this needs some work for profile selection. But if there is enough interest I can do it.
Fredo

I'm your biggest fan.