[Plugin Library] LibFredo6 - v15.4a - 13 May 25

fredo6 · 12 Apr 2012, 10:14

Hi Fredo,
Thanks for all your huge work and for sharing it with the community.
I'll just warn users of this library NOT to install it with a Ctrl-A and then drag-drop the files in their Plugins folder. Doing the extraction this way DOESN't create any folder structure and obiously generates errors when loading the library and plugin.
The safer (and only) way is to select "Extract" in Winzip, point to the correct folder and tick "use folder structure" checkbox.
Now back to removing my 148 wrongly located files

Didier,

Normally, what I say is:

Select all files (Ctrl A)
Extract to the destination folder (i.e. not 'drag and drop')
Answer Yes to overwrite files

Drag and Drop requires, as you say, to make sure Winzip option to use folder structure is On.

Fredo

Didier Bur · 13 Apr 2012, 13:08

@unknownuser said:

Extract to the destination folder (i.e. not 'drag and drop')

Sorry Fredo, my mistake

fredo6 · 14 Apr 2012, 17:37

NEW RELEASE: LibFredo6 v4.4m - 14 Apr 12

LibFredo6 4.4 is a new release which essentially support the publishing of ThruPaint and ReverseOrientFaces as part of FredoTools

This small update fixes some issues in ThruPaint and integrate the translation to Spanish (Defisto, Oxer) and Chinese (guanjin)

See main post of this thread for Download.

Fredo

nphong63 · 16 Apr 2012, 12:15

thank you!

kespencer1 · 20 Apr 2012, 13:59

Hey y'all. I need some help. For whatever reason, LibFredo6 plugin is starting to crash Sketchup. (Yes I know it's this one because I systematically went through and tested sketchup with each plugin I have.)Anyone know a fix for it?

Now that I think about it, it MAY be something that it activates. All I really know is that if I delete it, Sketchup doesn't crash. But then I can't use curveloft and whatnot. ANY help is appreciated.

3deeidee · 26 Apr 2012, 09:37

Hi,

the round corner tool seems like something i would use a lot. Unfortunatly i cannot get it to work properly. I have downloaded the LibFredo6 and placed it in the plugin folder (that is the .rb and the folder) and i also downloaded the round corner tool and also placed it in the plugin folder (the .rb and the folder). As i understand correctly it should then work. But nothing happens when i open SU. I'm working on a mac with SU7 pro.

Thanks
Ruud

TIG · 26 Apr 2012, 09:53

Assuming the file/folders were extracted 'intact' and then put into the correct Plugins folder [Macintosh HD/...Lib/.../plugins] and not a spurious 'User' one... then a restart of Sketchup should auto-load the tool for you.
However, like many such tools this is an Extension and so it needs a one off activation, which is done through Preferences > Extensions.
Once it is activated its menu items and toolbar becomes available to you - if it hasn't auto-activated then the toolbar can be activated from the appropriate menu item too...

TIG · 27 Apr 2012, 11:50

@kespencer1 said:

Hey y'all. I need some help. For whatever reason, LibFredo6 plugin is starting to crash Sketchup. (Yes I know it's this one because I systematically went through and tested sketchup with each plugin I have.)Anyone know a fix for it?

Now that I think about it, it MAY be something that it activates. All I really know is that if I delete it, Sketchup doesn't crash. But then I can't use curveloft and whatnot. ANY help is appreciated.
Are you sure it's installed properly - file and folder ?
Do you have the latest version ?

fredo6 · 8 May 2012, 21:23

NEW RELEASE: LibFredo6 v4.5a - 08 May 12

LibFredo6 4.5 is a update dedicated to

Some evolutions in ThruPaint 1.2 (paint container and text, as well as bug fixing)
New features for the Free Rotate tool of FredoScale (rotation with offset and inference on line)

See main post of this thread for Download.

Fredo

jooooe · 12 May 2012, 14:28

sorry! this is not suit for Mac?

Dave R · 12 May 2012, 21:22

@jooooe said:

sorry! this is not suit for Mac?

What makes you think that? It works fine on my Mac as well as many others.

ihanna · 4 Jun 2012, 19:42

@unknownuser said:

NEW VERSION 3.1c 11 Apr 09 NOW RELEASED
Needed for for FreeScale 2.0c
see http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=17947&p=144178#p144178

Note: For those who have downloaded the release (c) of 9 Avril, which was available for a few minutes, please download again the version of 11 Apr.

hello,

I just want to ask some help, I've already download those files twice but still not working, can you give me some advice? Thanks in advance.

You must be the change you wish to see in the world. —Gandhi

Dave R · 4 Jun 2012, 23:01

@ihanna said:

hello,

I just want to ask some help, I've already download those files twice but still not working, can you give me some advice? Thanks in advance.

You have to meet us half way. Give us something to help you out. We can't see your computer from here and you've given us no clue as to what you've done short of downloading the files. Did you extract the zip file into Program Files/ Google/Google SketchUp 8/Plugins? Did you extract them correctly? Do you have admin rights to install files into the Plugins folder?

Post a screen shot of your Plugins folder showing the files installed correctly and we'll go from there.

TIG · 5 Jun 2012, 07:27

These files don't do much on there own.
They are 'helpers' for many of Fredo's other tools, which don't work without the file and subfolder of files etc that form the 'Lib'...

GooUser · 10 Jun 2012, 15:20

Thanks you very lot ! It's Great.

Luaner · 18 Jun 2012, 02:37

Thanks again~

the.pjt · 19 Jun 2012, 18:58

hi dear ferdo , I have a little question ...

.. maybe it's a bad question and I know that it takes much time for you to write these features fur us ... thanks a lot for time you spend and offering your incredible codes freely to us ... thanks ferdo ..
my question is
how to disable time tracer and updater part due to have a faster startup and a lighter SU ?
I'm a ruby newbie .. but you codes are too complex for me to trace .. .. I just wanna to know the .rb files that does these extra works ...

I'm sorry for asking these .. I believe that these parts ( specially Updater module )are very useful for all users .. and thanks for codding these parts ferdo ..

thanks

fredo6 · 19 Jun 2012, 20:10

@the.pjt said:

my question is
how to disable time tracer and updater part due to have a faster startup and a lighter SU ?
I'm a ruby newbie .. but you codes are too complex for me to trace .. .. I just wanna to know the .rb files that does these extra works ...

You don't need to edit the ruby files.
Normally, go to the CheckForUpdate dialog box and enter 999 (days) in the 'next check' field.

Fredo

PS: 'Check for update' does not go to the Internet when SU Starts. It just checks the date to see if it should display the reminder, so it is very fast. The fact is that that the reminder is based on a WebDialog and the first web dialogs are used, it takes a little bit long (SU may load extra stuff or perform some operations in the background).

the.pjt · 19 Jun 2012, 20:50

thanks feredo ... I hade done that ( 999 ) several days ago .. but I alwase see the ruby image (update check ) at start up .. how about time tracer tool ?

thanks for answer and support ferdo

disco_UK · 20 Jun 2012, 18:00

hi Fredo, Thanks for this work you've done

I have unzipped it to my plugins folder on C:/Program Files(x86)/google/Google Sketchup 8/plugins but for some reasons I just cant find it in the menus! I have also put LibFredo6.rb in the plugins. am I missing something?

kindest regards

Disco